How Do I Change My Wifi Name And Password

Router Username And Password

How to change your Wifi name and password – Quick and Easy

After entering IP address of the router, you will get a popup saying enter username and password. This is router login credentials. By entering the correct username and password, you will be able to access router settings.

Normally, these credentials are . If you forgot the router login details then simply reset the router settings to restore its default settings.

The most common router usernames are admin, user, or just leave it blank. The most common router passwords are admin, password, or leave it blank.

Find Ip Address Of The Default Network Gateway

To begin, you’ll need to log into your router’s administrative web interface. You’ll need to know your router’s IP address to access that interface. If you don’t recognize the IP address, it’s probably not a major problem. To find out your router’s IP address, simply follow these steps:

In the search section of your taskbar, type cmd and hit enter.

This will open up a window which is known as the command prompt and is shown below:

In your command prompt, type ipconfig and press enter.

Some details will be displayed on your command prompt as soon as you will press enter. Under those details, try to locate Default Gateway. Once you locate that, the IP address written right next to it will be the IP address of your router. It is shown in a blue rectangle in the image below:

How Can I Upgrade My Smart Sim To 5g With Same Number

Upgrade your SIM in these easy steps!

  • Turn off your phone. Remove your old SIM and replace it with the LTE Upgrade SIM.
  • Turn on phone and wait for the SMS instruction from 3723. Reply to the message with your mobile number.
  • Wait for the SMS confirmation.
  • Restart your phone to complete the SIM upgrade process.
  • Don’t Miss: What Wifi Extender Works Best With Spectrum

    How To Choose A Strong Wifi Password

    Think of your wifi password like the lock on your front door. Passwords with personal information like the name of your dog or your home address are like the locks on your bathroom door. It can easily be picked or knocked down with little to no effort. Passwords that have been assigned by the service provider are like your standard door lock. While they may be more difficult to crack, most hackers have a list of commonly assigned passwords from each company. With these tools in hand, they can manage to unlock it. Then, there are strong passwords. These are like the locks on a bank vault in other words, they’re much harder to break. A strong password includes the following characteristics:

    • A minimum of eight characters
    • Both uppercase and lowercase letters
    • Numbers

    Update Password On Mesh Networking Kits

    How to Change Your Wi Fi Password: 7 Steps (with Pictures)

    Mesh networking kits are different from your standard router. You cant access a backend web interface to change the settings. Instead, you use a mobile app to log in to an account and make adjustments. That also means you dont need to go out of your way to locate the kits IP address as you would with a standard router.

    The following instructions are based on the Eero kit, so they may differ from what you may see on your screen.

    Step 1: With the Eero app open, tap on the Settings icon located in the bottom right corner.

    Step 2: Tap on Wi-Fi Name.

    Step 3: Tap in the new name and then tap on the Save button.

    Step 4: Tap on Wi-Fi Password.

    Step 5: Tap on the Edit Password button.

    Step 6: Enter a new password and then tap on the Save button.

    Pro tip:

    Is your old mesh networking kit slow as snails and obsolete? Consult our guide on the best mesh Wi-Fi systems to find your upgrade.

    Read Also: App To Watch Movies On Southwest Flight

    Changing Your Network’s Name

  • 1Open a web browser. Default web browsers for Windows and Mac computers are Microsoft Edge and Safari, respectively, but you can use any web browser for this step.
  • 2Enter your router’s address. Type into the address bar the address number you found in the last method, then press âµ Enter. Doing so will take you to your router’s Settings page.
  • For some specialized routers, such as Google WiFi routers, you’ll be prompted to download an app onto your smartphone and proceed using the phone app to configure your network.
  • 3Enter the password for your router if prompted. If you set a specific password for the settings page when you installed the router, you’ll need to enter it to continue.
  • 4Select your router’s current name. Since each router’s Settings page is different, this step will vary. Typically, you can either click the router’s name, or click a Settings option to go to the general section of your router’s settings.
  • 5Look for the SSID field. It may also be labeled “Network Name”, “Wireless Network Name”, “Router Name”, or something similar.
  • There will likely be a name already in the SSID field that correlates with your network’s current name.
  • 6Enter a new name for your wireless network. This should be the name you want to see while selecting your network from your computer’s Wi-Fi menu.
  • 7Save your new network name. Click Apply, Save Settings, Save, or whatever your configuration screen uses to finalize the process. This will save your new network name.
  • Test Your New Network Settings

    You have now updated the Wi-Fi network name and password. But before you pack up your laptop and go about your business, you should double-check to make sure everythings working.

    Part 1: Test the wireless connection

    Grab a device and find your new network name in the list of available networks. Enter your new password to make sure you can connect wirelessly. Its better to find out now than having to start the process all over again when youre late for a Zoom meeting or two minutes away from winning an auction on eBay.

    Part 2: Reconnect other devices

    Now that you updated the networks name and password, all the devices that were previously connected to your Wi-Fi network will need their information updated so they can reconnect. Remember that this doesnt just include all your computers and mobile devices, but smart TVs, smart thermostats, security systems, and any other devices that use your Wi-Fi network to connect.

    Is your new home Wi-Fi network too slow? Consult our guide on how to increase the speed of your home Wi-Fi.

    Also Check: Www Southwestwifi

    One: Find Your Routers Ip Address

    Most routers provide a web-based administrative interface that you can access via your browser by typing in the routers local IP address. Your first step is to find that IP address.

    Note: Some routers provide different admin interfaces. For example, if you have an Apple Airport router, you can use the Airport Utility on your Mac to change its settings. Other router manufacturers offer smartphone apps for changing settings, and some more expensive routers are even beginning to include built-in touchscreens. So be sure to check for specific instructions for your router.

    The chances are pretty high that youll need to use a browser to access your router. Its best to do this from a computer, though, because many routers dont have a mobile-optimized web interface that works well on smartphones and tablets.

    On a PC running any version of Windows, the quickest way to find this information is in the Command Prompt. To open it, press Windows+R, type cmd, and then press Enter.

    At the Command Prompt, type the command ipconfig and press Enter. In the results, look for the section showing your current network connection The routers IP address is displayed to the right of the Default Gateway entry.

    In macOS, click the Apple menu, and then select System Preferences. In the System Preferences window, click the Network icon, select your Wi-Fi or wired Ethernet connection, and then click Advanced.

    Change Your Bluecurve Wifi Name And Password On Mobile

    Changing Your Wi-Fi Network Name & Password
  • Open BlueCurve Home .
  • Select Connect.
  • Press the pencil icon on the top right corner.
  • Select WiFi Name or WiFi Password to change them.
  • Once you’re done, select Apply Changes, and you’re all set!
  • Note: After making changes, you may need to choose your new network name or enter your new password on previously connected devices.

    Also Check: How To Sync Blink Camera To Wifi

    Change Wifi Name And Password Via The Spectrum Router Interface

    Spectrum Internet service comes with a variety of high-end devicesfor instance, the Arris TG1672G, and the Netgear 3800 or 6300. While there may be subtle differences with each device, the process is not too dissimilarand looks like this:

    • To change the name and password of your Spectrum Internet WiFi, open your web browser and plugin your routers IP address in the address baras you did earlier when you changed the default router login information.
    • Next, sign in with your username and passworduse the new credentials youve created by following the steps outlined in the earlier section.
    • Then select the band you want to make changes to2.4GHz or 5GHz.
    • In the case of Arris and Netgear devices, you can go ahead and update the info in the SSID and Password fields. While if you have the Askey or Sagemcom device, navigate to the Basic tab and update the network information.
    • Save and apply as prompted. Remember if you are connected wirelessly while doing this, youll be disconnected from your Spectrum in-home WiFi. Sign in again using the new SSID and password if you want to make further changes.

    Pretty simple right?

    Learn How To Change Your Wifi Network Name And Password

    Let see how we can change wifi password and ssid with macOS or windows laptop easily.

    Open a web browser and type your routers IP address into the address bar to change your router WiFi name and password. Then sign in and select the band you want to change. Finally, under the Basic tab, enter in your new password and network name, then click Apply.

    Below are the step-by-step instructions of changing SSID and Password.

    Don’t Miss: How To Sync Blink Camera To Wifi

    Update Password Using Your Isps App

    Many ISPs provide mobile apps so you can easily pay your bill, add or remove services, and manage the router or wireless gateway. The following instructions are based on Spectrums cable internet service as an example, so they may differ from what you see in your ISPs app.

    Pro tip:

    If you have Spectrums wireless gateway but youre using a router you purchased from a store, these instructions only apply if youre still using the gateways Wi-Fi. Go to the first section in this guide for instructions on making changes to your store-bought router.

    Step 1: Open the My Spectrum app.

    Step 2: Tap on the Services icon displayed at the bottom of your screen.

    Step 3: Tap on Update.

    Step 4: Enter a new network name, a new password, or both.

    Step 5: Tap on Save Changes.

    Find Change Or Reset Your Hub Password

    How do I change my WIFI credentials (password/Network name ...

    The name of your WiFi network and its password are on the back or bottom of your hub . You can reset these to their default if youve forgotten what you changed them to.

    Good to know: Your password is always case sensitive, so enter it exactly like its shown or how you created it.

    Before you get start: Changing your password will disconnect all your devices from your hub so you’ll need to enter it again for each device.

    Check you’re connected to your Sky Broadband, then:

  • In a browser address bar, go to 192.168.0.1
  • Select Wireless or WiFi.
  • Enter the default username admin
  • And depending on which hub you have, the password sky or the WiFi password on the back of your hub.
  • If these dont work, follow the Resetting your WiFi password steps below then try again.
  • Enter a new Network Key thats the WiFi password you want to use.
  • Select Apply to save your new password.
  • Now, reconnect all your devices to your WiFi and youre good to go. Dont forget about smart home devices like thermostats and any Sky boxes.

    Tip: To create a strong password always use a combination of uppercase and lowercase letters and numbers, and dont use words that can be easily guessed.

    Before you get start: Changing your password will disconnect all your devices from your hub so you’ll need to enter it again for each device.

    Any other hub settings youve changed will also be reset, including the password you use to log in to your hub.

  • Press and hold Reset for at least ten seconds on your hub.
  • Select Apply.
  • Don’t Miss: How Does A Portable Wifi Hotspot Work

    How To Change Spectrum Wifi Password And Wifi Name From My Spectrum App

    To change your Spectrum WiFi name and password, download the My Spectrum app and log in with your username and password. Then select Services > Update and type in your new password and network name. Finally, select Save.

  • You can find this on the for Android devices or the Apple App Store for iPhones and other Apple devices.
  • Then open the app and agree to the terms and conditions.
  • Next, enter your Spectrum username and password and tap Sign In.
  • Then tap Services. You can find this at the bottom of your screen.
  • Next, tap View & Edit Network Info.
  • Then type in your new password and network name.
  • Finally, tap Save.
  • If youre still having issues changing your WiFi name and password, you can always reset your router and use the default WiFi name and password. Check out our step-by-step guide on how to reset your router to factory conditions here to find out more.

    HelloTech editors choose the products and services we write about. When you buy through our links, we may earn a commission.

    Set Up Your Wireless Network

    Once you log in to your router, youll quickly discover that there are many settings you can adjust. However, were going to focus on just two: your network name and password.

    Part 1: Change your network name

    Your network name, often referred to as its SSID, is how people will see your network when they are searching for Wi-Fi networks on their devices. By default, this will usually be the name of the router manufacturer with some added numbers. You can change this to whatever you want, as long as its a name that you will quickly recognize, especially if youre in an urban area where there are many overlapping Wi-Fi networks.

    The following instructions are based on a Linksys router, so they may differ from what you see on the screen.

    Step 1: Click on Wi-Fi Settings listed on the left under Wi-Fi Settings.

    Step 2: Enter a new name in the text field next to Wi-Fi Name. Do this for both the 2.4 GHz and 5 GHz bands, but be sure theyre different.

    Step 3: Click the Apply button.

    Part 2: Set up your network security

    Once youve named your network, you want to secure it with a good password so that passersby cant steal your Wi-Fi or, worse, use your network to distribute malware to your devices.

    Pro tip:

    Want to keep your home network secure? Check out the best home routers for security.

    The following instructions are based on a Linksys router, so they may differ from what you see on the screen.

    Step 1: Click on Wi-Fi Settings listed on the left under Wi-Fi Settings.

    Read Also: How To Connect Canon Mx492 Printer To Wifi

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox