How Do I Fix My Wifi Router

Check The Lights On Your Router

How to Fix a Wifi router which keeps on disconnecting frequently || Tp-Link wireless disconnects

Seriously, give that box a look. If any lights seem different, thats a sign somethings wrong. If you dont look at the router enough to know what would be different, dig out the instruction manual and give it a read: itll clue you in on what each light means, and what you can do about any problems.

Use A Long Range Router

Even if you have a fast connection, too many electronics can often overwhelm your WiFi. A typical home is streaming video, playing games, and surfing the Internet at the same time. Luckily theres long range smart routers like the Nighthawk that promise WiFi for up to 45 devices, and houses and businesses as large as 3,000 square feet.

How To Fix Your Network Problems

1. Just as your IT guy starts with a computer reboot, your internet service provider will tell you to unplug your modem and then plug it back in. If that doesnt work, unplug your router, give it a minute and then plug it back in. Sometimes, restarting your modem or router will reset your network and the issue magically disappears.

2. Next, check your wireless network configuration. Many routers today use dual-band technology to extend the routers range and Wi-Fi speeds. That means your router enables Wi-Fi communication via 2.4 GHz channels or 5 GHz channels.

However, settings on your router could have changed without you knowing and require your device to use a specific channel. Sometimes those channels appear like separate Wi-Fi networks on your device. Your phone or laptop may try to connect to a specific channel that seems available, but its not the network connection your router now requires. Check what channel your routers using by logging into your routers web interface.

Once you figure out if your router is set to a specific channel, you can also reset which channel your router uses. Resetting the channel can fix connection issues caused by an overcrowded Wi-Fi channel. Most 2.4 GHz routers come with a default channel of 6, but you can change the channel by logging into your routers control panel using the router IP address.

Recommended Reading: Dunkin Donuts Free Wifi Locations

How Do I Forget Wifi On My Galaxy A7

After you’ve written everything, to forget your Galaxy A7’s Wi-Fi network, do the following: Tap Settings. Click on Wi-Fi. Select the wireless network you want to delete. Click forget. If you don’t see this option, you may need to tap on your Wi-Fi network and then tap Forget network from the available options.

Im Worried About Amazon Sidewalk Giving My Wi

How to fix Comcast Xfinity Wifi Connection

Amazon Sidewalk is a new service that started rolling out in June 2021, and has caused some consternation among those with Amazon devices because of its use of Wi-Fi beyond the home.

There are two important parts of Sidewalk to consider. First, any compatible device will use BLE to help facilitate smart device communication and strengthen the Wi-Fi network around your home. If your neighbors are already using your Wi-Fi , they may find it easier, but otherwise not much will change.

However, Bridge devices can use Sidewalk to broadcast parts of your Wi-Fi band as far as half a mile away to accomplish similar goals. Bridge devices include the Echo Show 10, the Echo 4th-gen, the Ring Spotlight, and the Ring Floodlight Cam. Now, the signals these devices send are encrypted, but they also include information about your address and remain connected to your smart home. If thats a concern for you, we have a guide dedicated to disabling Sidewalk with the Alexa app for now, and seeing how the service develops in the future.

Editors’ Recommendations

You May Like: How To Sync Blink Camera To Wifi

Why Is Wifi Not Working On Laptop Windows 10

The problem with automatic Wi-Fi connection in Windows 10 may be due to the network card driver being outdated or corrupted. 1. Right-click the Start button and select Device Manager. 2. On the Device Manager screen, expand Network Adapters > right click on your computer’s network adapter and select Uninstall.

Try Another Device Or Website

Start with the obvious: is the problem only happening on one device or all your devices? If your computer’s having problems, see if your tablet can connect to the internet, or if your spouse or roommate’s laptop works. If the problem only happens on one device, you can safely narrow the problem down to that particular machine.

Make sure Wi-Fi is enabled and that you are connected to the proper SSID using the correct password. If you’re running Windows, right-click on the network icon in your system tray and select Troubleshoot Problems to run the Windows Network Diagnostic routine. This can sometimes correct common issues by resetting the adapter. Also, check your network adapter settings to make sure the adapter is using the correct gateway address and other settings.

Similarly, try another website. If you can visit other websites just fine, it’s likely that the problem is with the website you’re trying to visit, and you’ll have to wait for them to fix things on their end. .

Recommended Reading: How Do I Connect My Canon Mx492 To Wifi

My Download Speeds Are Poor What Do I Do

This one is more difficult to solve, as it might not be just down to the router. The size of the house will be one contributing factor, as will the positioning of the router. If you can’t move the router to a more central location, there are some things you can do.

You could try changing the channel that your Wi-Fi signal is using. If there are other networks nearby using the same channel, it could get congested and as such your speeds may suffer. Login to the web app as above in step 2. In the wireless settings this time you’re looking for channel. Pick a different one to the default and see if that helps.

One easy trick is to use the 5GHz connection if your router supports it. A lot of modern routers are dual or tri-band, offering 2.4GHz and 5GHz connections. Typically, 2.4GHz is for distance, 5GHz is for performance. On Netgear routers, you’ll see the 5GHz connection as a separate Wi-Fi network in Windows. By default, it’ll have 5G at the end of the SSID.

Another thing to try is enabling Netgear’s Dynamic QoS feature that is supported on some routers. This will help to intelligently prioritize bandwidth to make sure that the most important and demanding tasks, like streaming video and gaming, for example, are getting the share of the bandwidth they need. When you log in to your router’s web app you’ll find it under the basic menu in the sidebar.

Router Crashes Regularly And Only Restarting It Helps

How I Fixed My WiFi By Changing My Wireless Routers Channel

If your router needs to be restarted regularly, consider giving it a full reset. On most routers, youll find a Reset button that you can hold down with a paperclip. Do so for 30 seconds, and the router should default from factory settings. Use our guide to setting up a wireless router to get everything properly configured.

If that doesnt work, your router may be on its way out. Your only real option is to return it if it is within its warranty period or to buy a new one.

Read Also: How To Spy On Internet Activity Through Wifi

Run A Network Diagnostic

Network diagnostics, or troubleshooting, has a bad but not unfair reputation for being moderately useless. But theyre easy to do, harmless, and will occasionally solve the problem for you, so its worth giving it a go anyway.

For Windows 10

  • Go to your Apple menu and click System Preferences.

  • Click Assist Me, then click the Diagnostics button. Thatll open the Network Diagnostics tool.

  • Click Continue and follow the instructions.

  • Macs can also run a much more in-depth diagnostic, which might solve your problem.

    • If youve got anything plugged into your mac other than a mouse, keyboard, display, the power cord, and an ethernet cable, unplug that stuff.

    • Turn your Mac off, then on, and immediately press and hold the D key.

    • Hold it until you see a screen that asks for your language. Pick one, preferably one you understand.

    • Itll spend a few minutes testing some things. Follow the on-screen instructions.

    For Android & iOS

    If your Android or iPhone wont connect to Wi-Fi, theres a spot of bad news: neither mobile operating systems come with built-in network diagnostic tools. But you can download apps that will serve the same purpose. For Android, try Network Analyzer, and for iPhone, consider using Pingify.

    Put The Kids And Guests On Their Own Network And Enable Qos

    Parents can put their kids devices on a separate network and establish special rules and settings. This can help keep the kids out of trouble on the web, and it eases the burden on your bandwidth.

    You can set up a different Wi-Fi router, or you can simply enable your routers Guest Network option. You can also set up a different network name and password for the guest network to avoid confusion with your main network.

    Guest networks are meant for visitors to your home who might need a Wi-Fi internet connection that keeps your shared files private. This segregation will also work for your smart appliances and shield your main devices from Internet of Things attacks.

    You can also use QoS . QoS is a feature on some routers that will let you prioritize traffic according to the type of data getting transmitted.

    You could set latency-sensitive applications like Skype, IP telephony, streaming media, and online gaming to have higher priority over other types of activity. If you prioritize Skype, for example, other software will slow down, ensuring your call is smooth.

    Different routers have different ways of handling QoS, and most consumer-level routers have more simplified ways of enabling it by having presets available. Just check your routers support site for information on what each one does.

    You May Like: How To Change Wifi For Chromecast

    First Check Your Router Itself

    If youre lucky, your router will have a stricker with an IP address and a password that will make it easy to access its inner workings. If you find that sticker, just put the IP address in the address bar of your preferred browser, and put in the username or password on the sticker. Its not impossible, if this is the first time youve done this, that itll ask you to update your username and password as well. Make sure you dont forget them: theyre very important.

    But if you do forget them…

    How Do You Tell If A Battery Charger Is Working Properly

    How to Fix a Wireless Router that Keeps Disconnecting ...

    Check the readout on the voltmeter and see where the pointer is indicating to. If its on the left side, or negative side, switch the test probes. If its on the right side, it will show that the battery is receiving some charge. Where it points to on the meter will determine how much charge it received.

    Recommended Reading: Southwest Airlines Wifi Price

    Why Is My Wifi Wont Turning On

    • Method 1. If you are using a laptop, make sure the WiFi switch is turned on.
    • Method 2: Change the Owner of the Wireless Adapter
    • Method 3: Update the network adapter driver.
    • Method 4: Uninstall and reinstall the network adapter driver.
    • Method 5: Run the Network Adapter Troubleshooter
    • Method 6: Perform a System Restore

    Why Wep And Tkip Are Dangerous

    Unfortunately, despite its age, WEP and WPA-TKIP are still fairly widespread. We found WEP was still in use on a relatives ISP-provided router. We didnt have to change anything, or enable WEP they were already using it. WEP is a notoriously lousy encryption option. It has been from the beginning, and it never got much better.

    When the encryption protocol first released, most devices restricted WEP to 64-bit encryption due to U.S. regulations. That improved, but as you can see above the router, we tried still used 64-bit encryption. WPA, by comparison, uses 256-bit encryption. Worse yet, several flaws in the protocol were found over time, making the encryption easier to break. In 2005, the FBI demonstrated its ability to crack WEP encryption in mere minutes.

    The Wi-Fi alliance intended to replace WEP with WPA-TKIP, but unfortunately, the newer protocol uses many of the same mechanisms. Due to that choice, the two protocols also share many of the same vulnerabilities. A method to break through one typically works equally well with the other. Thus, TKIP is no safer to use than WEP.

    Knowing all that, Microsoft wants to warn you if youre using WEP or TKIP so you can fix the problem. Doing so now is especially important because eventually, Microsoft plans to phase outor deprecatesupport for the protocols. When that happens, the latest versions of Windows 10 wont be able to connect to these networks.

    RELATED:The Difference Between WEP, WPA, and WPA2 Wi-Fi Passwords

    Recommended Reading: Does Spectrum Offer Wifi Extenders

    What If I Dont Have My Routers Username And Password

    First of all, check all the paperwork that the router came with: theres very likely a manual that has it written down somewhere. But if you cant find it, or you threw out all that paperwork early, never fear! Theres still a solution you can use.

    Access this list of default routers and passwords, find your router model, and use the username and password on the list. If you cant find it: just try admin for the username and password, or password for the password. Theres a better than good chance those will work. Fun fact: this list is also why its so important we update your routers username and password! You dont even have to be a hacker to Google a list of default usernames and passwords and mess around with someones router.

    Anyway. If you or someone else has updated your routers username and password and you just cant remember what it was, you still have hope. Find the reset button on your router, then hold it for about 10 to 20 seconds. This will reset it back to factory settings, including bringing back the default username and password. Its also not impossible that the reset could fix your problem.

    Check The Basics On Your Pc

    How to Troubleshoot your NETGEAR Wireless Router Network
    • Make sure Wi-Fi is turned on.

    • Swipe in from the right edge of the screen, select Settings, then select the Network icon.

    • Turn on Wi-Fi.

    • Make sure the physical WiFi switch on your laptop is turned on.

    • Make sure your PC isnt in airplane mode.

    • Swipe in from the right edge of the screen, select Settings, then select the Network icon.

    • Turn off Airplane mode.

    • Move closer to the router or access point if you can.

    • If you dont see the network name at all, the router or access point might not be set to broadcast the network name. In this case, youll need to connect to it manually.

    • Swipe in from the right edge of the screen, and then select Settings.

    • Select the Network icon, and then select Hidden network.

    • Type the network name and select Next.

    • Type the password and select Next.

    • Follow any additional instructions to get connected.

    • The network will be added to your list of networks and will be available to connect to when your computer is in range of the network. To connect to the network, follow these steps:

    • Open Connect to a Network by selecting the network icon in the notification area.

    • Select Unnamed Network, select Connect, and then type the network information. The network will be added to your list of networks and will be available to connect to in the future when your computer is in range of the network..

    Read Also: Does Dunkin Have Free Wifi

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox