How Do I Improve Wifi In My House

Select A Good Place For Your Router

How to get free wifi and/or improve the wifi in your home

Not all places are equally suitable for your router. To start with, you want to avoid placing your router close to metal objects and appliances that emit electromagnetic waves. Metal is the top disrupter of a WiFi signal, and its presence close to a WiFi router can easily create a large dead zone.

Other materials, including glass, wood, plastics, foam, and cardboard, can also disrupt a WiFi signal but their influence of WiFi signal strength tends to less severe. Keep in mind that many buildings use metal studs for the particle board mounting, and placing your router close to them would be a bad idea. When in doubt, use a handheld stud finder or at least a stud finder app on your smartphone.

Strictly speaking, all household appliances emit electromagnetic waves to some degree, even fluorescent lightbulbs, circuit breakers, and electric razors. The biggest emitters of electromagnetic waves tend to be found in the kitchen, and they include stoves, microwave ovens, and dishwashers.

Other problematic appliances are washing machines, tumble dryers, televisions, cordless phones, and radiant heaters. If you have any of these appliances at home, keep your WiFi router as far away from them as possible to boost WiFi signal.

Ideally, you also want to keep a safe distance from electric wires. To cover an area with an even WiFi signal, you should place your WiFi router roughly in the center. You can slightly boost your wireless signal by elevating the router above the floor level.

Upgrade To Faster Internet

While we hope these tips will do the trick for you, sometimes your internet connection is simply too slow to sustain your internet consumption. If thats the case, youll need to upgrade to a faster internet plan to get better speeds.

Unsure what internet speeds you need to support your online habits? Check out our guides to internet speed for online gaming and video streaming requirements.

And if youre confused because youre sure youve paid for enough internet speed but your connection still doesnt cut it, that might be because your internet connection doesnt always perform at 100%.

Internet providers advertise speeds up to a certain speedthey dont promise that you will always get those speeds. So even if you have a 100 Mbps plan, you might not always get that much bandwidth. In that case, you might need a bit of a buffer or a plan thats actually faster than you think you would need. That way, network slowdowns will still happen, but youll probably notice them less.

Easy Ways To Improve Your Wi

How many times have you tried to watch a movie or work on an important project only to have your activities interrupted by skips, stops and buffering?

Yeah, that’s all of us.

A poor wifi signal puts a damper on what should be a relaxing evening and can also interfere with your ability to have a productive day if you work remotely for your employer. Slow load times and a lack of support for bandwidth-heavy activities make Wi-Fi unreliable, resulting in frustration and wasted time.

You should be able to trust your connection without experiencing slowness or hitting dead zones in your home. If your devices are always dropping the signal or you can never seem to achieve optimal performance when connected, run a speed test to discover the actual speed your connection is delivering. Disappointing results indicate a problem at one or more points in the Wi-Fi network.

So what can you do to overcome Wi-Fi difficulties and enjoy speedy internet for work and play?

Try these 15 simple tricks to give your signal a boost:

Don’t Miss: Can You Have 2 Routers In One House

Simple Ways To Boost Your Home Wi

Weve all been there: You’re watching the latest season of Orange is the New Black on Netflix when, all of a sudden, the video jerks to a stopand the endless buffering begins. It’s frustrating when your network slows down , but there are a few tricks you can use boost your Wi-Fi signal. Here are a few of them.

1. DON’T HIDE YOUR ROUTER.

Most people hide their routers because theyre unsightly or in the way, but placing a router in a closet or in a cabinet is a one-way ticket to slow Wi-Fi: Walls and doors can degrade and absorb signal strength. Find a central location in your home and put your router on a table or bookshelf. Because some routers are designed to project a Wi-Fi signal slightly downward, keeping it higher off the ground will evenly distribute a Wi-Fi signal throughout your home.

2. STAY AWAY FROM APPLIANCES AND METAL OBJECTS.

Microwaves, cordless telephones, flourescent lights, and even other routers in your neighbors home or apartment may interfere with your Wi-Fi signal. To reduce interference, place your router away from household appliances and set it to a different wireless channel and frequency. Using online toolsAcrylic Wi-Fi for Windows and AirGrab Wi-Fi Radar for Mac, for examplecan help you find the right wireless channel with the least amount of interference. If you want an easier fix, most routers have an automatic option to find the best channel for your location.

3. RESET ON A SCHEDULE …

4. … AND UPDATE YOUR FIRMWARE.

6. USE BEER CANS.

How To Boost A Wifi Signal

Increase Your WiFi Range

This article was written by Jack Lloyd. Jack Lloyd is a Technology Writer and Editor for wikiHow. He has over two years of experience writing and editing technology-related articles. He is technology enthusiast and an English teacher. This article has been viewed 1,836,438 times.

This wikiHow teaches you how to boost your Wi-Fi router’s range to reach its full, advertised potential. Extending your router’s reach past its maximum isn’t typically possible without using external equipment, such as a range extender.

You May Like: Blink Sync Module Reset Button

What Does Private Browsing Do

When activated, Private Browsing on Safari prevents your browsing history from being kept in the history tab of the application. Along with this, it doesnt autofill information that you have saved in the browser. In this mode, you essentially become incognito and any references of previous use is essentially hidden when you are in private mode.

For example: if you are on Facebook or filling out a form and some information or your login is already filled in in the spaces provided, this is called autofill. Its activated by simply clicking Safari next to the Apple symbol in the menubar and selecting Private Browsing, then clicking OK to the prompt.

The reasons behind private mode differ for each individual. While we wont go into all of those reasons, one thing that is important to remember is that private browsing doesnt forget the websites you visit. As we will see later on, Macs keep a second copy of the websites you visit in either mode. If you are in frantic mode looking for a solution to this, look no further.

Use A Wifi Extender To Cover More Space

This is one of my least favorite options to boost the WiFi signal, but its what most people tend to use when they have a difficult-to-reach spot. And its because these WiFi extenders are usually fairly cheap and you dont have to replace your existing router with some expensive mesh system. And it may be able to do its job up to a certain extent. That it because it extends one radio band, allowing the client device to connect to it, but then again, the backhaul traffic will not allow for many devices to use the bandwidth, the ping will be higher and all the other stuff that we hate about a bad WiFi connection. Still, if not other option is available, its going to give some Mbps to your wireless devices.

Also Check: Reset Blink Outdoor Camera

Here Are All The Ways You Can Improve Wi

BySimon Jary, SVP Consumer| 03 Aug 2020

Wi-Fi is just as essential as running water for many people, especially those who work from home. So when it’s slow or keeps dropping out – and ruining your Zoom call or interrupting your Spotify stream – it can be very frustrating indeed.

Your situation may be even worse than this: no signal at all in some parts of the house, or such a weak connection that it’s not good enough for loading a web page, let alone checking who’s at the front door via your video doorbell.

These Wi-Fi ‘black spots’ are most often caused by too much distance from the wireless router , thick brick or stone walls, and interference from other devices.

There are several ways you can fix this, but it all depends upon how much money you want to spend and where the problem areas are. Here are the main six ways to extend your Wi-Fi:

  • Move your existing router to a better position
  • Buy a new, better router
  • Buy a powerline networking adapter set with Wi-Fi
  • Switch to 2.4GHz from 5GHz
  • Now let’s look in more detail at each of those options.

    Consult Your Router Settings

    Improve your WiFi signal at home

    If you’re lucky, you’ll be able to recognize all the items on that list, but there may be a few that don’t have enough information. After going through my list, for example, I was left with a couple devices that listed no name and no manufacturer. However, I was able to get a little more information from my router’s web interface.

    You can open your router’s management page by typing its IP address in your browser’s address bar. Once there, look for an option that sounds like “Attached Devices” or “Client List.” This will present you with a similar list as Wireless Network Watcher, but the information may be slightly different. After cross-referencing the unknown devices between the two, I found one of them was listed as “AzureWave Technology, Inc” in my router’s interface, but not Wireless Network Watcher. A little Googling revealed that this was my Rachio sprinkler system, so I was able to mark that down and move on.

    If you see any other unlabeled devices in the list, check around your house for any internet-connected gadgets you might have missed. I realized that my wasnt listed, so after checking the Alexa app on my phone, I was able to match its MAC address to one of the unlabeled items in Wireless Network Watcher.

    Don’t Miss: Change Blink Camera Wifi

    Ways To Get Much Stronger Wi

    Easy fixes to improve your internet connection while everyone’s clamoring to get online!

    The products and services mentioned below were selected independent of sales and advertising. However, Simplemost may receive a small commission from the purchase of any products or services through an affiliate link to the retailer’s website.

    Its a problem weve had at our house for years. We consistently have interruptions when trying to stream Netflix or Amazon Instant Video. Even worse, we struggle to get a good internet connection in our bedroom .

    Luckily, with some new technology and some tweaks to my router, I now have great Wi-Fi across my entire house. Here are a few easy things I did that really helped.

    Finding The Best Modem Location

    The modem supplied by your provider will also include a router to create your homeâs WiFi network. Ideally your modem and router should be in a central part of your home â it shouldnât be hidden in a cupboard or drawer or stuck in a lonely corner. The WiFi range and speed can be greatly affected by your modemâs location. You can relocate your modem by using a longer cable to connect to your connection point. If you canât move the modem, donât worry â there are a lot of other things you can do to improve your WiFi speed. Hot Tip: Routers use wireless signals and can be affected by cordless telephones and microwave ovens, so itâs best to keep them away from these appliances.

    Don’t Miss: Multiple Routers In House

    Make Sure Youre On A Clear Channel

    If you live in a densely populated area, your Wi-Fi signal could be suffering from congestion. If you and your neighbors are trying to use the same channel, everyones router performance can suffer.

    Most routers are set up to automatically use the clearest channel available, but thats not the case for all of them. Check your routers administration interface to see if yours is set on automatic. If its not and that option is available, select it. If your router doesnt have that option, youll need to change the channel manually. PCMag has more information on how to do that.

    Other Browsers And Private Browsing

    How can I boost my home WiFi signal?

    Other browsers have this form of privacy mode for their service. They promise many of the same things as Safari, but they do not have the same Terminal issue due to how this command only presents websites visited on Safari .

    If you use Firefox, youll notice that its private mode is also known as Private Browsing. Chrome calls private mode Incognito, while Internet Explorer refers to it as InPrivate Browsing. Opera is the newest to the scene, denoting it as Private Tab. Safari is the oldest well-known browser with this feature.

    As you can see, despite Private Browsing not being 100% private, Terminal allows for your browser to be. In what ways has Terminal helped your life or allowed you to become more productive? Let us know in the comments below.

    You May Like: Can You Have Two Routers On The Same Network

    Move Your Wireless Router To An Elevated Clear Spot

    The location of your Wi-Fi router has a big impact on the strength of its signal. Position the device in a high, open space with limited obstructions for better Wi-Fi signal results. As we already mentioned, signals travel perpendicular to your router. If your router is on the ground, many of your Wi-Fi signals will travel horizontally along the floor and reach fewer parts of your home.

    You may be able to improve the signal and raise your internet speeds by setting up the router on the second floor if you have a multi-level home. Placing your router too close to materials like concrete or brick can limit its ability to broadcast to the rest of your home. The denser the objects around your wireless router are, the greater the signal loss.

    What’s Blocking Your Wi

    There are a lot of things in the home capable of blocking a Wi-Fi signal. Homeowners do not have to live in a bunker underground to experience many of these. A variety of building materials can slow down or reflect the waves coming from the router, resulting in a weaker signal. The most common obstacles to Wi-Fi signal in the home are:

    • drywall
    • windows
    • water, such as an aquarium

    Some barriers are less common. For example, dense foliage surrounding the home may impede the signal outside the walls. The neighbor’s Wi-Fi signal strength can also make it difficult to maximize a person’s own system.

    For people to understand the sources of the problem, it helps to think of the waves more in terms of sound than sight. It is true the best way to ensure a strong signal is to place it in a spot with a direct line of sight to the device. However, simply being able to visibly glimpse the router does not improve the signal. This is why windows and water are common barriers. The waves have to move through a solid surface. In the case of windows, they reflect some of the waves back toward the router. Newer windows may have special coatings to increase the likelihood of this reflection.

    Don’t Miss: See Saved Wifi Password Mac

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox