How Do I Secure My Wifi

Turn Your Network Off When Not At Home

Securing your WiFi network

One of the easiest ways to protect your home network is to turn it off when you’re not at home. Turning your Wi-Fi off while you’re away reduces the chances of hackers attempting to break into your home network when you’re not at home.

As well as reducing security risks, unplugging the router when youre not there also prevents it from being damaged by power surges.

How To Secure My Wifi Smart Router At Home

What is the best way to secure your home wireless network ? Create a tricky password for the router. You need to change the router’s admin credentials. Assign a new name for the network. Ensure that wifi encryption is strengthened. Turn off Remote Management in your home. Limit WPS to only 10 or 20 units per license. keep the firmware of the routers updated. Set up a firewall by turning it on.

Think About Where You Position Your Router

If you can, locate your router in the center of your home. Not only does this distribute network access more evenly, it also helps to put your network out of reach/view from hackers. Its a good idea to keep routers away from windows and external doors if you can.

Remember that routers radiate above and below as well as horizontally. If you have a two-story home, placing the router on a high shelf on the lower level will help ensure that the upper level will receive coverage as well as downstairs.

Don’t Miss: How To Change My Optimum Wifi Password

Rename Your Wifi Network

A unique network name, also known as a service set identifier , is just as important as your password. Keeping the standard name created by your internet service provider upon setup may signify that your password is unchanged as well. Since many hackers have a list of ISP-assigned passwords, theres a higher chance of them breaking into your wifi. Including personal information like “Janes House” or “123 Pearl Street” may indicate that your password also contains personal information, once again making it easier for hackers to crack the code. Consider the same elements for your network’s name as you would for your password: long and complex.

How Does My Home Wi

How to Encrypt and Secure a Wireless Network: How Do I ...

Your Wi-Fi network is your homes wireless internet connection. It usually involves a wireless router that sends a signal through the air. You can use that signal to connect to the internet. But unless your network is password protected, any device within range can pull the signal from the air and use your internet connection.

The upside of Wi-Fi? You can connect to the internet wirelessly. The downside? Others nearby who connect to your unprotected network might be able to see what you do online, including your personal information. And if anyone uses your network to commit a crime or send illegal spam, the activity could be traced back to you.

Also Check: How To Find Out My Wifi Password Mac

Choose A Good Ssid/network Name

Your SSID is the name that identifies your network. You should change this from the default name, but avoid choosing anything that identifies you or your address. If you head to your router settings, you may also be able to stop your router from broadcasting your SSID, so people will only be able to find it if they type it in.

Enter Your Ssid And Password

SSID is considered the networks name for those unaware, and a passphrase or password will be required by every device you want to connect to the network.

While choosing a strong password, take care of a few things:

  • It should contain symbols, letters, and numbers.
  • To avoid any brute force attack from the hackers, keep the password complicated.
  • If you are unable to decide on a secure passphrase, take help from an online password generator.

You May Like: Find Stored Wifi Password Mac

Enable The Router Firewall

A firewall examines incoming network data and blocks anything that’s deemed unsafe. Most routers have some kind of built-in firewall feature, often called SPI Firewall. This compares parts of all incoming network data against a database and only allows traffic in that passes the test.

On most routers this will be enabled by default, but you should still check to make sure it’s on. Note that this may interfere with certain online games. If it does, you can get around it by using port forwarding.

Also note that a router firewall isn’t enough on its own. Sometimes malicious data can get through undetected, which is why it’s wise to also install a software firewall on your device as a second layer of defense.

Is Your Home Internet Secure

How to easily Secure your Home WiFi Network

“There is no wonder Wi-Fi networks are as secure as other untrusted infrastructures,” said i ntry member, Kayne McGladrey. As sensors, like webcams, doorbells, switches, plugs, and other IoT devices, webcams, doorbells, switches, plugs, and others are notoriously insecure devices. “Insecure IoT devices could be infected by malicious software and handed over to an end user, ” said McGladrey.

You May Like: Does Southwest Have Wifi

Keep Your Router Firmware Updated

Much like the operating system on your computer or mobile device, a routers firmware is what operates the router and sets the rules that the router runs by. The firmware rules all of a routers online security settings and operation.

And, just like your computers operating system, a routers firmware will be updated by the manufacturer from time to time. However, you can also manually update the firmware, just to make sure you actually have the latest version of the firmware.

Most routers will offer a method of downloading and automatically updating the firmware, as seen above. The process usually takes only a few minutes, depending on your router and the speed of your internet connection.

By updating your routers firmware, you can ensure that your router is protected against any bugs and security holes that may have been discovered in the past.

Change The Wireless Networks Default Name

A Service Set Identifier is a name used so you can identify your network. You should change the network name from the routers default. This can make it harder for anyone to identify the manufacturer of your router and guess its default settings. For privacy reasons, you may also wish to avoid using a name that will identify you or your house instead use something more random.

Most modern devices will allow you to hide your SSID from casual observers, but this should not be considered as a security measure as there are numerous freely available tools which can still discover networks that are hidden in this fashion.

You May Like: Can You Have Two Wifi Routers In One House

Q: How Do I Find Out What Security Protocol My Router Uses

A: You can check your routers security protocol through the routers web administrator interface or management app and find the wireless security options in the network security section. Its also wise to check the wireless security specifications on the manufacturers website before you purchase a new router.

How To Secure Your Wireless Home Network

How to Encrypt and Secure a Wireless Network: How Do I ...

This article was written by Jack Lloyd. Jack Lloyd is a Technology Writer and Editor for wikiHow. He has over two years of experience writing and editing technology-related articles. He is technology enthusiast and an English teacher.The wikiHow Tech Team also followed the article’s instructions and verified that they work. This article has been viewed 1,158,901 times.

This wikiHow teaches you how to prevent unauthorized access to your wireless home network by securing your router. You can do this by editing your network’s settings from the router’s page. Keep in mind that router pages are often unique to the specific brand of router that you use, meaning that you’ll most likely have to poke around your router’s page to find the settings that you need to change.

Read Also: Free Wifi Dunkin Donuts

Use Modern Encryption Standards

Encryption is a must-use feature on your router. Neglecting to use encryption is like leaving all your doors and windows open all of the time: everything you say and do is freely viewable for anyone who cares enough to look or listen.

You should review your Wi-Fi encryption settings to make sure that you aren’t using an outdated protocol. The newest Wi-Fi standard at the time of writing is WPA3, though not all routers have this. WPA2 is still fine, but the original WPA is outdated. If this is your only option, you should replace your router.

Read more: Wi-Fi Security Types Explained

WPA protection comes in both Personal and Enterprise. The latter is for use in corporate settings, so you should use Personal at home.

You should never use WEP encryption because it’s weak and easily cracked. If you can only use WEP on your router, buy a replacement soon.

In addition to using WPA3 or WPA2, make sure you’re using AES encryption instead of TKIP. TKIP is better than nothing, but AES is more recent and secure so you should always use that if available. Note that AES + TKIP encryption is effectively as bad as TKIP only, so stick to AES.

Lastly, change your WPA2/WPA key . Make sure you choose a strong password that isn’t too short or easily guessed. Aim for a minimum of 12 characters with a healthy mix of lowercase, uppercase, numbers, and special characters .

Virgin Media’s Blocked Internet Ports

In order to protect our customers and our network, a number of ports on the Virgin Media network are blocked.Ports on the Internet are like virtual doors that data can pass through. All internet traffic passes through ports to get to and from systems and services across the Internet.When a certain port is known to be subject to security vulnerabilities, we sometimes block that port on our network.These ports are blocked at network-level. Traffic over these ports within your home network will continue to operate as normal, but will be inaccessible to devices outside your network.Blocked portsTCP & UDP ports 135, 137, 138, 139 Used by the NetBIOS serviceNetBIOS services allow file sharing over a local network. When exposed to the Internet, it can be exploited to carry out malicious activities such as Distributed Denial of Service attacks or to gain unauthorised access to systems on a local network.TCP & UDP port 445 Used by the SMB protocolPort 445 is vulnerable to a number of attacks which target vulnerabilities in systems running file-sharing services. This port is used by various malware strains to gain entry to a network, namely the WannaCry and Nimda malware variants.

The ports blocked on our network are used by services that are generally not designed for use on the Internet. They can be used on a local network but should not be exposed to the wider Internet.

Also Check: Southwest Airtime Player

Check That Your Device Does Not Auto

If your device is set to automatically connect to available open Wi-Fi networks, then you run the risk of automatically connecting to unknown and potentially dangerous networks. You should switch off auto-connect on your device settings page refer to the manufacturers instructions for more details.

Enable Mac Address Filtering

How to Secure Home WiFi Network

To further limit what devices can connect to your Wi-Fi network, I recommend enabling the MAC address filtering option. Access your routers web interface and look for the option. It might be listed as either MAC Filter, Network Filter, Access Control, Network Access, or something like that. You will find it under either the Security, the Wireless, or the Advanced menu.

Read Also: How To Reset Blink Camera System

What Your Router Does

You might not think much about your router, but its probably the most important gadget in your home. Its definitely the most important one connected to your network.

Most Wi-Fi routers have several functions. First, theyre gateways that connect a cable modem to the internal network. Theyre also wireless access points that provide connectivity for the Wi-Fi devices in your home. Most routers also include a handful of Ethernet ports, which make them a network hub or switch.

Many cable companies offer the option of an all-in-one modem and Wi-Fi router, so its possible you have a single box that does everything.

However, if you do have an all-in-one modem and router from your cable company, you might want to reconsider that. Many of them arent especially speedy and might lack the features and security youd get from a standalone router.

What Are Virgin Media’s Encryption Options

The most common way to protect a WiFi network is to enable the WiFi router’s built-in encryption options. Encryption means that the WiFi signal is scrambled so that unauthorised computers and devices are unable to understand the data being transmitted across your WiFi network. The computers and devices you wish to authorise are set up so that they can descramble the WiFi signal and hence connect to and use the WiFi network.

WiFi networks secured with WPA encryption require the use of a network security key or ‘passphrase’ , made up of letters and numbers. Computers and other devices must use this passphrase in order to connect to the WiFi network.As the owner of the WiFi network, you may choose your own passphrase when you set up the WiFi network. The more complex and lengthy your passphrase is, the less likely it is that someone unauthorised will be able to access your WiFi network.When choosing your passphrase we recommend at least twelve characters with a mix of upper case, lower case and numbers. It should be unique: not something you use for anything else.To use WPA on Windows, you need to use Windows XP Service Pack 2 or later.

Read Also: 2 Wifi Routers In One House

How To Secure Your Home Wifi In 3 Simple Steps

Thanks to WiFi, were more connected than ever before. Entire households run on wireless internet, including smartphones, laptop computers, smart home devices, gaming systems, and more. While using WiFi to power our devices can make life easier and more mobile, this type of internet connection can also open us up to online threats, especially if we dont secure it.

Many people realized this possibility back in September of 2020 when iOS users began receiving alerts that their WiFi wasnt secure. But what exactly does that mean and what can be done about it? In this article, well discuss some WiFi basics, potential threats to your security, and how to secure your home WiFi in the three steps.

Change The Default Login

How do I set up and secure my wireless connection ?

If youre wondering How to Secure My WiFi, start here: dont use the default password. Too often the default password is 000 or password or in the case of routers, its the serial number, which is on the side of the router. This means if anyone has seen the router or taken a picture of it could figure out what the administrative password is, and use that to reconfigure the router to steal information from you.

So the first thing to do when looking to secure a WiFi router:

  • Connect to the router via an Ethernet connection. Do not use a WiFi connection to get to the administrative access. Check the manual, but usually, the Admin interface for a router is at or .
  • Once in, log in with the default admin username and password. Even though you want to change it, you still have to get in the first time.
  • Depending on your router, the steps to change the administrative username and password will be different. For Arris, this is listed under Login settings:
  • Change both the username and the password. Write these down and store them in a secure location, like a home safe. Dont give it to your kids you know that will end badly.
  • Thats the first step to securing your WiFi network. But its not the last.

    You May Like: How To Connect An Ipad To Wifi

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox