How Do You Change Your Wifi Name And Password

How To Change Your Verizon Password And Name

How to change your Wifi name and password – Quick and Easy
  • To login to your Verison Wi-Fi router, open up a browser and go to 192.168.1.1 and then login with the password located on the sticker on the router itself. .

Ho To Change Your Hughes Net WiFi Password and Name

  • Hughes Net: Go to the website: systemcontrolcenter.com or 192.168.0.1 From the System Control Center page, click on Wifi Settings at the left side. Enter the Administrator username and password. The default is admin for both username and password.

How To Change Your Spectrum WiFi Password and Name

  • Spectrum: Connect your computer to your modem via an Ethernet cable.Type http://192.168.0.1 into your browsers address bar.Enter the username and passcode for your device, as listed here

How To Change your Netgear WiFi Name and Password

  • Netgear: Go to http://www.routerlogin.net Enter the router user name and password when prompted.The default user name is admin. The default password is password.

How to Change Your D-Link WiFi Name and Password

  • D-Link: Open your web browser and enter the IP address of the router into the address bar- . The default IP is 192.168.0.1 or click here http://192.168.0.1.By default, the username is admin and there is no password.

How To Change Your Cisco WiFi Name And Password

  • Cisco: Navigate to IP 192.168.1.1To login the default username and password should both be either admin or cisco. See here for details

How To Chang Your Linksys Name And Password

  • Linksys: Launch a web browser and enter 192.168.1.1The default password is admin

How To Change The Name Of A Wireless Network

This article was written by Jack Lloyd. Jack Lloyd is a Technology Writer and Editor for wikiHow. He has over two years of experience writing and editing technology-related articles. He is technology enthusiast and an English teacher.The wikiHow Tech Team also followed the article’s instructions and verified that they work. This article has been viewed 2,104,320 times.

This wikiHow teaches you how to change a wireless network’s name. You can usually change your network’s name from your router’s page in a web browser, though you’ll first need to find your router’s address to access its page. If this doesn’t work, resetting your router and then reconnecting to it should allow you to change the network name.

How To Change Your Wi Fi Password

This article was co-authored by Luigi Oppido. Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years. This article has been viewed 8,997,098 times.

Wi-Fi is great for keeping you connected, but a poorly secured Wi-Fi can put your personal information at risk. Keeping your router password protected and changing the password regularly are essential keys to protecting your network and your data. Changing your password also keeps cheap neighbors from stealing your bandwidth! To change your Wi-Fi password, you’ll need to open your router’s configuration page, log in using your current details, and change the password under the wireless settings menu.

Also Check: How To Hook Up Spectrum Wifi

How To Change Your Ssid And Password On A Sabai Os Vpn Router

  • Connect your computer or tablet to your Sabai VPN Router via ethernet or by wireless. By default the wireless password for your Sabai Router is sabaipass123.
  • Open a web browser. In the address bar enter 192.168.199.1 and, if prompted, log in. The default username is admin and the default password is sabaipass123.
  • Using the left-hand menu, navigate to the Network > Basic page and scroll down to the Wireless section of your router. Enter your new wireless name in the SSID field and your desired password in field.Depending on how many wireless radios your router has, you may have 1, 2, or 3 wireless sections. You will need to change the SSID and password for each section. You can use the same password, but each SSID should be different. We suggest adding a 24, 58, or 58-2 to the respective name.
  • Click Save at the bottom of the page. After the settings have been saved, you will need to reconnect your wireless devices to your Sabai OS router using your new WiFi name and password.
  • Finding Your Router’s Address On Mac

    How Do You Change Your Frontier WIFI Password?
  • 1Open the Apple menu . Click the Apple logo in the top-left corner of the screen. A drop-down menu will appear.
  • 2Click System Preferencesâ¦. It’s in the drop-down menu. The System Preferences window will open.
  • 3Click Network. This globe-shaped icon is in the System Preferences window. Clicking it opens a new window.
  • 4Click Advancedâ¦. It’s in the lower-right side of the Network window. A pop-up window will appear.
  • 5Click the TCP/IP tab. This is at the top of the pop-up window.
  • 6Review the “Router” address. You’ll find this number to the right of the “Router” heading in the middle of the page. This is the number you’ll enter into your web browser in order to access your router’s page.
  • The address number will usually resemble something like “192.168.1.1” or “10.0.0.1”.
  • You May Like: Can You Have Two Wifi Routers In One House

    How To To Change Your Wi

  • Start by going to Note: you may be required to enter your Device Access Code in order to continue. The default Device Access Code can be found on the side of your gateway .
  • Go to Home Network > Wireless
  • Either change the Network Name or the Password
  • Changes can be made to your Wi-Fi name under Network Name
  • To change the password, change the Security from WPA-Default Key to WPA PSK option then type your desired password in the Key section
  • Save all changes made to your device
  • Get more details on How to Change your Password on another specific modem/gateway.

    When setting up a new Wi-Fi password, don’t use your name, address, birth date or other things that make it easy for someone to identify you.

    Once you have successfully changed your Wi-Fi password , you may need to reconnect all your Wi-Fi devices using the new password information.

    How To Change Your Spectrum Wifi Name And Password

    Contents

  • How to Change Spectrum WiFi Password and WiFi Name from My Spectrum App
  • When you get a new router from Spectrum, the first thing you should do is change the default WiFi network name and password. This will make it easier for you to remember your WiFi password. And it will also make it more difficult for hackers to breach your network and steal your private information, such as your bank details. Heres how to change the name and password of your Spectrum router using your routers web interface, your online account, or the My Spectrum app.

    Read Also: Connect Roku To Wifi Without Remote Iphone

    Learn How To Change Your Wifi Network Name And Password

    Let see how we can change wifi password and ssid with macOS or windows laptop easily.

    Open a web browser and type your routers IP address into the address bar to change your router WiFi name and password. Then sign in and select the band you want to change. Finally, under the Basic tab, enter in your new password and network name, then click Apply.

    Below are the step-by-step instructions of changing SSID and Password.

    Resetting Your Router To Factory Settings

    How To Change Your Wifi Name & Password On Windows
  • 1Understand when to use this method. If your router’s page doesn’t allow you to change your network’s name or your network name changes aren’t saving, you can reset the router to its factory settings and then assign a new name to the network when first signing into it. Since resetting the router also disconnects any currently connected items, this should be a last resort.
  • Resetting your router will change the network’s name back to the name printed on the back or bottom of the router.
  • If you reset your router, you’ll need to reconnect manually every Internet-connected item in your home to the router.
  • 2Make sure that the router has a password sticker. If you’ve had your router for a few years, the factory password sticker may have faded or been damaged. You’ll usually find the password sticker on the back or bottom of the router.
  • If you don’t have the factory password, you won’t be able to sign into the network with the necessary password after resetting your router.
  • 3Find the router’s “Reset” button. This is usually a small, recessed button on the back of the router.
  • 4Press and hold the “Reset” button for 30 seconds. You may need to use a bent paperclip or a needle to do this.
  • 5Release the button after 30 seconds. Your router should turn itself off and begin rebooting.
  • 6Allow the router to finish resetting. Once the router is on again, you can proceed.
    • Always make sure your wireless network is password-protected.Thanks!

    You May Like: How To Connect Roku Tv To Wifi Without Remote Iphone

    Change The Name And Password

  • Open the AirPort Utility app on your Mac, located in the Utilities folder in the Applications folder.

  • In the graphical overview, select the base station you want to configure, then click Edit. You may need to enter a password for the base station.

  • Do any of the following:

  • Change the Wi-Fi network name: Enter a new name in the Wireless Network Name field.

  • Change the password: Enter a new password in the Wireless Password and Verify Password fields.

  • If you want the Wi-Fi password to be remembered in your macOS keychain, select Remember this password in my keychain.

  • To save your changes, click Update.

    Note: If you dont click Update within five minutes of resetting the base station, it defaults back to the previous password.

  • Set Up Your Wireless Network

    Once you log in to your router, youll quickly discover that there are many settings you can adjust. However, were going to focus on just two: your network name and password.

    Part 1: Change your network name

    Your network name, often referred to as its SSID, is how people will see your network when they are searching for Wi-Fi networks on their devices. By default, this will usually be the name of the router manufacturer with some added numbers. You can change this to whatever you want, as long as its a name that you will quickly recognize, especially if youre in an urban area where there are many overlapping Wi-Fi networks.

    The following instructions are based on a Linksys router, so they may differ from what you see on the screen.

    Step 1: Click on Wi-Fi Settings listed on the left under Wi-Fi Settings.

    Step 2: Enter a new name in the text field next to Wi-Fi Name. Do this for both the 2.4 GHz and 5 GHz bands, but be sure theyre different.

    Step 3: Click the Apply button.

    Part 2: Set up your network security

    Once youve named your network, you want to secure it with a good password so that passersby cant steal your Wi-Fi or, worse, use your network to distribute malware to your devices.

    Pro tip:

    Want to keep your home network secure? Check out the best home routers for security.

    The following instructions are based on a Linksys router, so they may differ from what you see on the screen.

    Step 1: Click on Wi-Fi Settings listed on the left under Wi-Fi Settings.

    Also Check: Mirror Iphone To Roku Tv Without Wifi

    Change Your Bluecurve Wifi Name And Password On Mobile

  • Open BlueCurve Home .
  • Select Connect.
  • Press the pencil icon on the top right corner.
  • Select WiFi Name or WiFi Password to change them.
  • Once you’re done, select Apply Changes, and you’re all set!
  • Note: After making changes, you may need to choose your new network name or enter your new password on previously connected devices.

    How To: Change A Home Wifi Network Password

    How To Change Wifi Password

    To change the password for the wireless network on your Shaw wireless modem, you will need to log into the admin console of your WiFi modem which will allow you to configure various settings related to your wireless network. You can do this over WiFi, but a wired connection will offer the most reliable experience.

    Don’t Miss: Two Wireless Routers In House

    Changing Your Network’s Name

  • 1Open a web browser. Default web browsers for Windows and Mac computers are Microsoft Edge and Safari, respectively, but you can use any web browser for this step.
  • 2Enter your router’s address. Type into the address bar the address number you found in the last method, then press âµ Enter. Doing so will take you to your router’s Settings page.
  • For some specialized routers, such as Google WiFi routers, you’ll be prompted to download an app onto your smartphone and proceed using the phone app to configure your network.
  • 3Enter the password for your router if prompted. If you set a specific password for the settings page when you installed the router, you’ll need to enter it to continue.
  • 4Select your router’s current name. Since each router’s Settings page is different, this step will vary. Typically, you can either click the router’s name, or click a Settings option to go to the general section of your router’s settings.
  • 5Look for the SSID field. It may also be labeled “Network Name”, “Wireless Network Name”, “Router Name”, or something similar.
  • There will likely be a name already in the SSID field that correlates with your network’s current name.
  • 6Enter a new name for your wireless network. This should be the name you want to see while selecting your network from your computer’s Wi-Fi menu.
  • 7Save your new network name. Click Apply, Save Settings, Save, or whatever your configuration screen uses to finalize the process. This will save your new network name.
  • Learn How To Change Your Wi

    There is a super-easy way to reset, or change, your Wi-Fi password or Network Name on your NVG with Smart Home Manager! You can use our app too!

  • Download the app or check out the web version.
  • Sign in to the app using your AT& T Member ID. Don’t know it? We have you covered!
  • Select Network
  • Choose the part of the network you want to change!
  • Don’t Miss: How To Improve Wifi In Basement

    What Is The Password For Router Login

    Normally, router login details are written at the bottom of the router. You can try default passwords such as admin or pass etc. If you forgot password, reset your router and then try logging in with default password. If you still having trouble then contact router manufacturer tech support for assistance.

    Two: Access The Web Interface

    How to Change Your WiFi Name/Password From Phone or PC – Tutorial

    Next, youll need to access your routers web interface. Open up your preferred browser, type the IP address you found into the address box, and then press Enter.

    Youll be asked to enter the routers username and password to log in. If youve never changed these before, youll be using the default login credentials.

    If youre not sure what these are, you can experiment a bit. Often, the default password is either admin or just blank. On some routers, you may need to enter admin as the username and a blank password, admin as both the username and password, or admin as just the password with a blank username.

    Recommended Reading: Canon Pixma Mx492 Wireless Setup Mac

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox