How To Activate Spectrum Wifi Router

Why Is My 5g Wifi Not Showing

Maximize Your In-Home WiFi

The most common issue that we have with a 5GHz connection is 5GHz WiFi not showing up on windows 10. Usually, the main reason for this is the router or hardware not being able to support the WiFi connection. If your WiFi connection is 5GHz, there are chances that your router may not be compatible. Even if some routers can support 5GHz connections, you might still need to manually set up 5GHz WiFi on your laptop or computer. If you have a corrupted or outdated network adapter, that can lead to spectrum 5G not showing up.

Change The Preferred Band

This is another effective solution you can try at home. Using Device Manager, you can change the Preferred Band to 5GHz. It has proven to be a helpful tip to many users for resolving spectrum 5G not showing up. For instance, if you cannot see 5GHz in the list of connections on your laptop, open the Wireless Adapter Properties window. From there, go on to the Advanced tab and click on Preferred Band. It is available in the Properties drop-down list. From the Preferred Bank menu, select Prefer 5.2GHz Band from the Value drop-down list. Before exiting, ensure to save the changes. Once this is completed, you must restart your computer and check if it is resolved.

Log In To Your Router

The first thing that you will need to do is to log in to your router. You can do that by simply launching a browser and then entering the IP address of your router which is usually or However, remember that in some cases a router may have a completely different IP address. It may even have an app that you can use to access the settings. If you are unsure about the IP address then there is no need to worry. Just have a look at your router and you will be able to find it at the back or on the side of the device. If not then it must be mentioned in the user manual.

Read Also: How To Connect Blink Sync Module To Wifi

Why Are There Two Networks On My Router

Modern Wi-Fi routers usually use both 2.4 GHz and 5 GHz networks. You may have heard of 5G phone networksbut this isnt that.

The 2.4 GHz and 5 GHz networks simply use different frequencies to transmit the internet from your router to your devices.

Go for the 2.4 GHz network to connect most smart home devices. The 2.4 GHz networks wide-reaching frequency also works better than 5 GHz for computers that are far away from your router.

Choose the 5 GHz frequency for devices that are closer to your router. At close range, 5 GHz provides a much stronger signal that helps support the heavy internet usage of computers, gaming consoles, and smart TVs.

Check If 5ghz Wifi Is Hidden

Step By Step Guide on How to Set Up Spectrum wifi Router ...

Sometimes, the most straightforward answer to why is my 5g not working? is to check if your 5GHz connection is hidden. You can hide your WiFi connection to add protection and privacy. But hiding your connection will lead to spectrum 5G WiFi not showing up when you want to connect a new device. It might not show up on a lot of devices, even if they were previously connected to the 5GHz connection.

You can go to Network and Internet Settings in your devices and follow the steps below when 5GHz WiFi not showing up is the issue:

When you go to Network and Internet Settings, you will see the WiFi tab

Once you choose the WiFi tab, you have to select Manage Known Networks

Once you go there, click to ass a new network.

You must mention the SSID and Name BOC here.

Once done, select the security type you want.

Enter the WiFi password in the Security Key box.

You can select the Connect Automatically option if youd wish to connect to a 5GHz connection whenever you are within the range.

You can click Save and save the option selected.

This would give you access to your internet connection if it were hidden before.

Read Also: Blink Sync Module 2 Reset Button

Meaning Of Wps And The Wps Button

WPS is the acronym for WIFI-protected setup. The feature allows users to connect their devices easily to the Wi-Fi connection. It also helps to prevent unauthorized users from gaining access to ones Wi-Fi network. Once you set up WPS, you can just select the network on your device and connect to it without entering a password or a pin. You can disable or enable the feature by pressing the WPS button on your router.

Next, log into your network and enter the credentials present on the routers backside. In the settings menu, find WPS and enable it. Do note that not all providers refer to WPS as WPS. Other names of the feature are Wi-Fi simple config and Quick Secure Set up to name a few.

How To Program Your Spectrum Tv Remote

Usually, the Spectrum guide in your TV receiver programs your remote right away. But if it doesnt, the programming process is simple. With your TV on, complete the following steps:

  • Press and hold the OK and Menu buttons at the same time for 35 seconds. The input button should blink twice when finished.
  • Using the list below, press and hold the number button that matches your TV brand. Keep holding the number down until your TV turns off.
  • Insignia/Dynex1
  • Toshiba9
  • Vizio0
  • Once your TV turns off on its own, youre all set to go. Turn the TV back on, and get to watching your favorite shows.

    Read Also: How To Connect Internet To Roku Tv Without Remote

    Activate Your New Modem

    At this point, most internet providers will require you to activate the new device using the information you collected in step 1.

    Some may require you to call them, others to visit an online activation page.

    Find your ISP below and activate your new modem device:


    You should now be able to browse the internet with your new device!

    Feel free to connect your router at this point to get a WiFi connection.

    If your modem has built-in WiFi, you can connect to the network using the credentials listed on your modems sticker or instruction booklet.

    WiFi network name = SSID

    WiFi password = WEP / WPA / WPA2 / AES

    Pros To Having Your Own Router

    Spectrum Internet Self Installation: How To Install Internet With WiFi

    First, lets go over all of the benefits of having your own router instead of using Spectrums router.

    • Save Money: You will avoid the recurring $5 monthly WiFi charge from Spectrum
    • More Choice: You will be able to choose the features that you really want from your router, including using a mesh system for extended coverage
    • Better Security: You can get more security options as well to keep your router as locked down and safe as possible.

    Ultimately, you will be able to have a router that really works for your networks needs rather than a router that is only just ok.

  • Buying a new router. The first thing that you need to do is get a Spectrum compatible router. You will want to have the best Spectrum router possible, so make sure that it is going to fit your needs. You will want your new router to support 802.11n and 802.11ac protocols to support existing devices on your network. You will also want a router that is at least dual-band, if not tri-band.
  • Naturally, Spectrum will not be able provide any support for a router that is not their own, so make sure that you are comfortable with the use of the new router or know that the new routers manufacturer has reliable customer service.

  • Turning off the internal router. After you have acquired your new router, you will need to first disable the internal router in the modem/router combo that you received from Spectrum. It will not work to have two routers running over the top of each other.
    • Wireless

    Read Also: Blink Sync Module No Lights

    Return Your Rental Modem Equipment

    The last step to getting your cable bill cut is to return your rental equipment.

    Depending on the provider, you can either ship/drop-off your old modem with a prepaid shipping label, or return it in person to a local office.

    Note: If possible, we suggest returning it in person and getting a receipt as a proof of return. This will prevent any potential issues with missing equipment or erroneous billing statements.

    Return your modem rentals to:

    Search for: YOURINTERNETPROVIDER modem return

    Place Router In Bridge Mode

    After you have logged into your router, head to LAN Setup and then you can switch the NAT mode to Bridged. Based on which router you have chances are that the settings might be organized or located differently. Therefore, it is best to search how you can enable the bridge mode on the router that you have. If you cannot find the bridge mode, then you can disable the DCHP lease. It will allocate a specific IP address to a particular device. This way, there will be no conflicts between the two devices in the future.

    Recommended Reading: Can You Have 2 Routers In Your House

    How To Activate Spectrum Tv

    Before you can start watching shows, head over to Spectrums activation page and answer the questions there to verify your account. Once that information processes, youll see a welcome screen on your TV.

    Once you click through the welcome screen, the Spectrum TV guide will show you all the ins and outs of how it works. If you find that you cant click through the welcome screen, youll need to program your remote and follow our steps in the box below.

    When youve finished clicking through the Spectrum TV guide intro, youre set to enjoy your new Spectrum TV servicemostly. Some channels might not work right away since full Spectrum activation can take up to 20 minutes.

    Why Use This Wi

    Spectrum Self Installation Guide [ONLY 3 STEPS] Check Now

    You may have received the modem and router from the provider when you subscribed to any of Spectrum internet deals but why should you consider using Google Nest Wi-Fi? Well, simply because it offers many benefits which makes it hard for anyone not to invest in it. Lets have a look at a few of them.

    • Routers that are provided by the provider may not perform the way you wanted them to which will significantly affect the connection speed. However, with Google Nest Wi-Fi you will easily be able to enhance the connectivity which will improve the internet speed, allowing you to stream video content without any lag.
    • Google Nest Wi-Fi gives users significant control over their network. It will give you different features like blocking particular websites or extending your Wi-Fi coverage.
    • You will not be paying the bill for using the companys router.

    Read Also: Blink Camera To Wifi

    Reset Your Spectrum Router One Of The Easiest Ways To Get Rid Of The Issue Spectrum 5g Not Showing Up

    Resetting the router is one of the first things you should try when your spectrum 5G WiFi keeps dropping. Often you will find that the spectrum router not working is the main issue. Most 5GHz connections come with their own compatible router. Most of the compatible routers are from reputable hardware manufacturing companies in the industry. Often, you can switch the GHz in your connection by pressing a button on the router. However, when your router is on and still does not show the spectrum 5G, we must first reset the router.

    How to reset spectrum router?

    Every router comes with a reset button. You can press it and wait for it to reset. It may take a few minutes to switch back on and light up. Once it is completely switched on, you can check your mobile, laptop, or any device to check if they detect the 5GHz connection.

    This simple step is likely to pass the test most of the time. Sometimes, along with the resetting of your router, you may have to restart your devices as well.

    How do I enable 5G on my spectrum router?

    Most routers come with a switch to change the frequency to 5GHz.

    Prepare For Spectrum Ipv6

    There are 4.3 billion IPv4 addresses so far and all of them are assigned already. ARIN in 2015 announced that IPv4 is going to exhaust soon. Its no surprise that the said number of addresses is not enough. IPv6 is vital for supporting the growth of IP networks worldwide.

    Spectrum has recognized IPv6 as an essential expansion for the growing connectivity needs of customers. Its also a promising avenue for innovation in networked technology. Since customers require IPv6 connectivity as well, the provider is dedicated to supporting their needs.

    As the provider transitions to IPv6, there wont be any change in your Internet experience. In fact, they have enabled IPV6 on their foundation infrastructure already. The IPV6 access is enabled on all Spectrum wifi plans .

    Also Check: Tcl Roku Tv Connect To Wifi Without Remote

    Re: Setting Up Router Using Spectrum 2g And 5g

    What I ahve done is disconnected the Spetrum router and replaced it with the Netgear Nighthawk router as you mentioned.

    My son in law confused me with the 2g and 5g. I thought those were seperate lines that had to be placed into the Netgear router and I couldn’t find them. No wonder I was confused and confused everyone else as to what I was trying to do.

    I will run the set up as per the manual.

    I am also moving the router form being inside the AC Closet where the Tech had placed it and move it into the living room by the tv and computers.

    This should help in reception and drop issues when I am streaming.

    Thanks for being patient and understanding while I am educating myself. The forum has been a great source of information and help.

    S To Enable Wps Feature On Spectrum Router

    How to install Spectrum WIFI kit

    After locating the WPS button on the back of your Spectrum router, the steps are very simple. All you need to do is follow them step-by-step.

    • Press the WPS button for three seconds. It is present on the back of the Spectrum router that comes with the Spectrum TV box.
    • Release the button after three seconds are over.
    • Some WPS buttons may come with lights. If the button has lights, see if they are blinking. If they are, then the connection is working.
    • Now, go to the Wi-Fi settings of the device. Here, you will find the network. Make sure that the WPS feature is enabled on the network as well.
    • If the WPS feature is enabled on the network and the router, the connection will be set up.
    • Begin using the internet on all your internet-enabled devices. You can connect to the Wi-Fi network without using any password or pin.

    These simple steps are quite easy to follow and understand. With successful execution, you will be able to set up WPS.

    Read Also: Southwest Airlines Airtime App

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox