How To Block Someone From Using Your Wifi

Change The Router Login Credentials

How To Stop/Block Someone From Using Your WiFi Network Using Android Smartphone

This is an important follow up step that is sometimes missed. If you anticipate that blocking this device will get a bad reaction and/or retaliation from the person whos been blocked, you might want to change the access details to the router to stop them taking control of it themselves and changing the credentials.

  • While inside your router, you are looking for the option to change the router login details .
  • This might be under Settings/Access/Admin/Password or something similar. It will vary with each router.
  • Change your router admin/password to something long, unique and complex to add an extra layer of security to your network, and to prevent the blocked person going into the router to unblock their device.
  • You must be sure to remember what you changed it to though, since if you forget this youll have to do a full factory reset of your router to reset everything back to default values and start again.
  • While youre there, it may also be a good idea to also change your Wi-Fi username and password if its currently still the default values on the back of the router. Look under Wireless Settings/Security/Advanced or something similar. It will disrupt access, but will make the network more secure if you use long, unique and complex router and Wi-Fi login details.
  • See our article on making your Wi-Fi network more secure for more tips on improving home Wi-Fi security.

Find Mac Address From Mobile

If you want to block your family member or kids internet schedule access than you can also find Mac address from mobile settings.

Go to Phone settings- About Phone

Inside status, you will find Mac address, and other phone information such as mobile signal, IP address,

Right down the Mac address and add for the block list.

How To Keep Outsiders Away

If you suspect someone is stealing your Wi-Fi, its a good idea to beef up security . If you dont have a password on your network, add one. If you still use the default router name and password, change it you can do this from the admin page on your router.

To change your password, look for the pre-shared key in your security settings. Changing your wireless password will kick off all current devices , so youll have to reconnect your devices once you have a new password.

To change your router name, locate the Service Set Identifier. This is typically found in the wireless settings menu. Look up more specific instructions for your specific brand of router if necessary.

Lastly, its important to use the strongest wireless network encryption available for consumers. At this time, though WPA2 may be the most commonly used, WPA3 is the strongest. So you may want to start thinking about getting a new one that features WPA3.

If your router is outdated, you might not be able to find support for it anymore. As a result, you may not have access to security features such as these. If this is the case for you, it may be time to consider purchasing a new router .

Recommended Reading: How To Connect Canon Mx492 Printer To Wifi

Check Mac Address In Pc/laptop

To get a Desktop or Computer Mac address you can use the command prompt as well as from Network connection.

Open Run using Windows + R key

Type CMD and hit the enter key.

In the command line type ipconfig /all press enter key to execute.

You can find all the Ethernet and WLAN Mac address details.

For Laptop block WiFi mac and for Desktop Block LAN mac Address to dis-allow from internet access.

Once you have got all the Mac address just add one by one in WiFi router and that user will force disconnection after making save changes.

Although to block User in TP-Link WiFi Router I used TP Link router but you can also follow the same steps for any other brand Wifi router.

+ Best Software With Wi

How to Block People From using your Brodband WIFI ( Dlink ...
  • If you wish to keep your Wi-fi network secure and restrict unwanted access, you need a Wi-Fi blocker for your PC.
  • Many Wi-Fi blockers from our list allow you to password-protect your network to keep it safe.
  • This software will also help you block Wi-Fi hackers that are trying to steal your data.
  • Know that you will also be able to see lists with all the devices that have accessed your Wi-fi.

Wi-Fi is an important feature of Internet connectivity. Many devices such as laptops, gaming consoles, and smartwatches can be connected to Wi-Fi connections.

Some major benefits of Wi-Fi include portability, increased Internet speed for streaming, gaming, and downloading of heavy files.

Although, there are many ways of making your Wi-Fi secured with WPA2 and a strong password. It is possible that your friends might have accessed your password details and shared them with others.

This can lead to heavy data usage and/or people having access to your network and confidential shared files on your Wi-Fi network.

However, many Wi-Fi routers enable users to see the list of connected devices on your Wi-Fi connection some hackers have various ways of connecting without your knowledge.

Hence, the WindowsReport team has compiled some of the best software that can be used to monitor your Wi-Fi connections and block illegally-connected devices.

Read Also: Pixma Mx492 Wireless Setup

Keep Your Router Updated

Your router has a complex operating system which isnt immune to software bugs. A particularly nasty software bug could even allow a hacker from the other side of the world to remotely infiltrate your network and steal your personal information. While most routers these days update automatically, some require you to manually trigger the update process. Its a good idea to set a reminder on your smartphone to check for available updates at least once a month.

How To Block Someone From Using Your Wifi

Despite protecting your WiFi with a password, there is a high chance that an intruder can gain access by cracking the password. It can be anyone, a neighbour, a passerby or any random stranger. No matter who accesses it, they will have an option of accessing your WiFi connection. The very first thing that one does after knowing that someone is accessing their WiFi is that they change the password.

However, that is not a long term solution because the newly created password can be cracked again. The best solution in such a case is to restrict access by blocking them. However, not many know how one can blacklist a particular device from accessing WiFi or disallow any new device from creating the connection. You can easily block someone from accessing the WiFi either by wireless MAC address filtering or by using an app named Fing to block the access. We will discuss both the methods here.

Also Check: How To Sync Blink Camera To Wifi

Why Kick People Off Your Wifi Network

  • Slow bandwidth and internet
  • Hackers in control of your router, internet, network, and you
  • Friends downloading illegal torrents
  • Bandwidth exceeding FUP limits resulting in plan upgrade
  • Asking people to stop is not working, nobody listens to your requests

In all the above situations, its much more efficient and easier to just kick people off your WiFi network rather than asking them to remove themselves.

Find Mac Filtering Or Access Control Options & Block Access

How to remove someone from using your WIFI ? || Block People Off Your Wifi || 2020 || 100% WORKING

Once youve identified the device you want to block, and there isnt an option right there on the Devices menu to block it, then head over to the MAC Filtering or Access Control menu on the router.

A screen should come up something like this :

Sometimes all the devices will be listed right there, with MAC addresses, which you can easily select Allow or Block for. Other times, it will be an empty menu that you have to populate yourself by entering the MAC address manually and selecting Block.

Select or enter in the MAC address of the device you want to kick off the network, and select the Deny/Disable/Block option. Save settings, and the device is now blocked from accessing the internet via that router.

This method can be circumvented by advanced users , but is good as a basic step to block everyday users who are not experts in hacking and networking.

Also Check: Southwest Onboard Player App

Avoid Open Public Networks

As convenient as public WiFi networks are, you should be very cautious when connecting to one. Not all public WiFi networks respect the privacy and security of their users, and some public networks may even be set up by hackers who want to lure in unsuspecting victims to steal their passwords and bank accounts. Only connect to verified, trustworthy public networks and always disable automatic WiFi connecting.

Detect Unauthorized Wireless Connections

There are basically two ways to go about detecting all the devices connected to your wireless router: either check on the router itself or use a device already connected to the network to scan the entire network. I prefer the latter method because its less complicated, however, I will mention both ways.

The first step is to connect to your wireless router from your web browser. In order to do that, you have to type in the IP address for your router. If you dont know it, read my post on determining the IP of your wireless router. Once you have that, youll need to login using the username and password.

If you dont remember the password or you never changed the default password, thats a problem. In either of these cases, I recommend resetting your wireless router to factory default settings and starting from scratch. It may sound like a monumental task, but its really not.

First, read my post on resetting your wireless router, which is fairly easy to do. Next, dont worry if you dont have the paperwork for your router anymore because you can either find the default password on the router itself or you can find default router passwords online.

If all of that is too complicated, another method to find connected clients is to use a smartphone app. For Apple devices, I recommend Net Analyzer Lite and Fing Network Scanner. Fing is also available in the .

Recommended Reading: Does Dunkin Donuts Have Free Wifi

Finding Your Router’s Ip

First, open cmd. If you don’t know how to do this, hold the Windows Key + R, type “cmd” in the box that comes up, and then hit enter or type “cmd” in the search box. Type “ipconfig” into cmd then hit enter. If you are using wifi find your wifi adapter and if you are using ethernet, then find your ethernet adapter. Next, find the IP listed under default gateway. This is your WIFI router’s IP. Copy it down. Mine is 192.168.1.1 This is a common IP for a router.

How To Configure Access Control On The Wi

How to BLOCK People from Using Your WiFi / Internet ...

169914This Article Applies to:

Access Control is used to block or allow specific client devices to access your network based on a list of blocked devices or a list of allowed devices .

I want to: Block or allow specific client devices to access my network .

1. Log in to the web-based interface of the router. If you dont know how to do that, please refer to

2. Go to Advanced> Security> Access Control.

3. Enable Access Control.

4. Select the access mode to either block or allow the device in the list.

To block specific device

1) Select Blacklist and click Save.

2) Select the device to be blocked in the Online Devices table by ticking the checkbox .

3) Click Block above the Online Devices table. The selected devices will be added to Devices inBlacklist automatically.

To allow specific device

1) Select Whitelist and click Save.

2) Click Add in the Devices in Whitelist section. Enter the Device Name and MAC Address .

3) Click OK.

Done! Now you can block or allow specific client devices to access your network using the Blacklist or Whitelist.

Get to know more details of each function and configuration please go to to download the manual of your product.

Is this faq useful?

Don’t Miss: Does Pokemon Go Need Wifi

Enforce Good Vpn Policy

While there will be exceptions depending on the needs of your organization, a good policy is to block outgoing VPN traffic before it can leave your network. In addition, you should ask the human resources department to publish a rule banning VPN use unless it’s specifically permitted for individual cases. You want the HR department involved so you can take action when somebody figures out how to get around your VPN blocks.

Next, you need to configure your firewalls or routers to prevent outgoing VPN access. Here are six changes you need to make:

Set Up Strong Encryption

WiFi encryption is your main defense against hackers looking for a quick and convenient way how to hack WiFi passwords. Unencrypted wireless communication can be captured, analyzed, and abused. The basic level of WiFi protection is WEP encryption.

While better than nothing, there are many easy-to-follow online tutorials out there that can teach virtually anyone how to hack a WiFi password on a WEP-encrypted network. You should always use at least WPA+TKIP encryption. Ideally, configure your router to use WPA2+AES encryption for a bulletproof security.

Also Check: How To Find Your Wifi Password On Mac

Best Android Apps To Detect Wifi Thieves And Block Them

How do you find out if somebody is stealing WiFi? There are plenty of Android network apps helps you to catch WiFi stealer. You can make sure nobody else is accessing WiFi and protect your network from intruders with these Android apps. Your Android phone will help to keep an eye on home or office network with network monitoring apps. Once they could intrude into your network, they can steal your data and trace your transactions from any computer device that you use on the same network. They can monitor the websites you are opening, they can trace the credit card and bank account numbers you are using for online purchase and use it for themselves later.

So here is the list of Android Apps to Detect WiFi Thieves and Block them away from your network to protect your data.

S To Block Devices From Your Wifi Network:

How to Block Someone From Using Your WIFI (TP-Link)

Step 1. First of alL, you need to . Download and install it on your Windows computer, and you need to select your preferred language to start.

Step 2. Now you need to get the MAC address of all the devices that are being currently connected to your WiFi network and for that you need to click on File> Settings.

Step 3. Now from the network adapter, you need to select your WiFi adapter this usually looks like 192.168.1.1.

Step 3. Now start scanning devices and you will see the list of all the devices currently connected to your WiFi, note down the MAC address of the devices that belongs to you only and anyone of the person whom you share your WiFi.

Step 4. Now apply MAC filter on your router, this will only allow selected devices to connect to your wifi network, for complete guide visit our post- Allow Selected Devices To Connect To Your Wifi.

Step 5. Now MAC filter will get enabled, and only the devices listed in the router settings will now have access to your WiFi network, and no other will be able to get connected to your WiFi.

Thats it! You are done, you have kicked off all unknown devices from your WiFi network.

Also Read: How To Protect Your Wifi Network From Hackers

Read Also: How To Connect Canon Mx492 Printer To Wifi

Popular Articles

Related Stories

Stay on op - Ge the daily news in your inbox