How To Boost Wifi Signal On Router Without Antenna

Dont Rely On Obsolete Hardware

Boost your non antenna wifi router – M1Molter EN

If you are running old hardware you cant expect the best performance even if you want it so bad. We have a tendency to subscribe to the if it aint broke, dont fix it mentality with back-end devices, especially networking gear. However, if you bought your router years ago, you might still be using the older, slower 802.11n standard.

Even if your router is new, you might have some ancient devices that are falling back to older, slower standards. If you bought a PC within the last couple of years, you likely have an 802.11ac wireless adapter, or at least 802.11n.

How Can I Boost My Wireless Router Signal

  • The Setup of Your Router is Important
  • You might want to change your wireless channel.
  • If your router is not on, update its firmware.
  • The drivers for your wireless adapter should be updated.
  • It might be time to replace your routers antenna.
  • The Wireless Repeater should be added
  • My setup uses the DD-WRT protocol.
  • Adjust The Router Placement

  • A router should be placed in a central location within the home.
  • Move the router away from bedrooms that may be located in a corner of the home.
  • Place the router in a centrally located room, such as a living room, and place it high on a shelf or countertop.
  • Routers should not be placed on the floor.
  • Recommended Reading: What Is The Best Wifi Extender For Spectrum

    Incorporate The Use Of Boosters

    You can begin to add boosters to the network to make the connection more enhanced. Devices such as Wi-Fi repeaters and Wi-Fi extenders will make the signal spread out and serve a wider area.

    As a result, the signal strength becomes more powerful hence delivering the best outcomes. The boosters role is to ensure that the networks speed and stability get maintained, although the signal may be slightly lower.

    You can explore the Wi-Fi extender that serves your ISP and functions well. This is because we have explored the best Wi-Fi extenders for Spectrum, and the top-rated Wi-Fi extenders for AT& T among other ISPs.

    Get A Stronger Antenna

    How To Boost Wifi Signal On Router Without Antenna ...

    Most WiFi routers come with small, weak antennas. Its not that manufacturers want to save every cent they can, but powerful WiFi antennas tend to be hideously large. Compared to the antenna that came with your router, which probably is just a few inches tall and has around 4 dB gain, a 10-dB antenna can be anywhere between 10 to 15 inches tall.

    But if you dont mind the size, a new, powerful WiFi antenna is a great way how you can boost WiFi at home or office without buying a new router.

    There are several different types of WiFi antennas, but the only type you need to care about is the common rubber duck antenna, which is an electrically short monopole antenna that consists of a springy wire in the shape of a narrow helix, sealed in a rubber or plastic jacket to protect the antenna.

    Such antennas use the same RP-SMA connector, and there are many different models available on Amazon and other online stores. Some even come with a handy extension cable that allows you to place the antenna farther away from your router to achieve optimal signal distribution.

    To boost WiFi signal, you need to purchase an antenna with more gain than your current one. The gain of an antenna system relative to an isotropic radiator at radio frequencies is expressed in dBi, or decibels relative to isotropic. Most home routers come with small antennas, whose gain tends to be between 45 dBi. Replacing such antenna with a 9 dBi antenna should provide excellent signal boost.

    Don’t Miss: Optimum Wifi Login Password

    Reboot Your Router And Modem

    The first thing you should do when your WiFi connection slows down is to reboot your router and modem. Rebooting your router and modem will reset your connection, which could instantly boost your WiFi signal.

    You can easily reboot your router and modem by unplugging them for 60 seconds. However, this can change the IP addresses of your connected devices, which means you might have to reconnect them to your WiFi network afterward.

    Placing The Router In A Central Position

    The location of your router determines how far the signal can travel and the signal strength.

    To boost signal strength in different areas, you can position the router in a central position. This will help to distribute the signal more evenly around your home or office.

    Additionally, Wi-Fi routers require open space placement to be able to function at their best.

    Place the router away from the wall and any obstructions that may interfere with the Wi-Fi signal. Keep the Wi-Fi router away from other appliances and electronics.

    Running these devices too close to the Wi-Fi router can interfere with the signal.

    Read Also: Does Netgear Wifi Extender Work With Spectrum

    S To Creating The Deep Dish Design

    You might find it useful to have some sort of clamp to hold things together while the glue dries or while you trace the cutouts. I used a spare chip clip. Scotch or masking tape is also good to have on hand.

  • Start by using the line labeled side length on the template to draw four sides of a square onto your cardboard. Use something with a square edge to make sure you dont draw a skewed rhombus. I did this by placing the paper on the cardboard and then punching a hole through with a pen at each of the corners.
  • Cut out the square. This will be the reflector panel. Smear a thin layer of glue onto one side of the panel. Be sure to get close to the edges.
  • Place a sheet of aluminum foil onto the glue, covering the panel entirely. Trim off the edges of the foil so it matches the shape of the cardboard. Try to press out any bubbles or wrinkles. Mine has a seam in the cardboard that couldnt be avoided.
  • Cut out the strut, then use it as a stencil to trace and cut out another one. Youll want two struts per panel.
  • This is where it helps to have good glue like rubber cement or hot glue. I used Elmers glue and attempting to get everything to stay in place while the glue dried was a pain. I used some tape to help. I used some objects I had on hand to help ensure the panel didnt peel away from the struts.
  • As you can see, my deep dish wifi extenders came out way bigger than they needed to be, but they still worked pretty well. See our test results below:

    Change Your Routers Channel

    Boost Your WIFI Signal Long Range USB Router Repeater For RV Boat Home

    Image via Wikimedia Commons

    Wireless routers can operate on a number of channels. From a Windows PC, go to the command prompt and type netsh wlan show all to see a list of all wireless networks and channels in use in your vicinity. Go to your wireless networks administrator interface and change your routers channel to one that is less commonly used. The administrator interface may vary depending on your device and wireless service provider, but this setting is typically found in the basic wireless settings.

    Recommended Reading: Southwest Airlines Airtime App

    Upgrade Your Wifi Routers Firmware

    Firmware is software that makes your devices work the way the manufacturer intended them to. Some devices, such as routers, need to have their firmware upgraded periodically to make sure they are functioning to the best of their ability.To make sure your router has the most up-to-date firmware installed, you should consult your user documentation, the router manufacturer or your internet provider.You might need to download a firmware file from your routers support page or push a firmware upgrade button on your router. Upgrading router firmware should be done fairly regularly to improve your WiFi signal whether you are having problems or not.

    The 2% Milk Aka The Ok

    The first two options have been about either pulling or pushing WiFi service from the source. How about beefing up the WiFi reception ability inside the shed?

    Using a wireless card can help extend the WiFi range of your notebook up to 5X. Granted, this is a bit of a longshot, because if WiFi signal isnt coming in, then it likely isnt coming out.

    However, if you are able to get spotty reception inside, a wireless card should help. For smartphone users, youre SOL unless you tether to the laptop.

    Pros:

  • Must share same electrical wiring.
  • You May Like: Change Wifi On Blink

    Can We Use Router Without Antenna

    Step 1:For a stable and effective network range, you must keep your routers firmware up-to-date. Step 2:If your router is running in an old firmware version, then update it to the latest to avoid low signal strength. Step 3:You can also use a Wi-Fi Extender to boost the Wi-Fi signal strength of your router.

    How To Boost Wifi Signal Range Without Touching The Antenna Or Router Using Reflectors Etc

    How to Boost Wifi Signal With Tinfoil and Paper.

    I have a project to boost a wireless signal but without touching the router and its antennae.

    1st of all the router is above the cabinet which we can’t reach.2nd we are not allowed to touch the router which means we can’t add extender or any other wires.And 3rd we were asked to boost the signal in order to reach the targets and be creative. here’s my illustration:

    Plan A would cost less but the risk failing it… I think would be high.

    I am planning on using aluminum card board, foils and tin cans as reflectors and to save money. so I plan to make a parabolic dish and some reflectors made up of aluminum.

    Can my dish reach the targets or my reflector?I don’t know how analog/digital signal works but i think it would bounce in a strait line when ever it reflect.

    Here’s my illustration: plan A

    Plan B would cost a lot but lower the risk… and unfair

    and that is buying a repeater and install it at the center of the hallway.

    Plan C is 50 50

    and that is make an antenna that runs in battery’s. but I don’t know how to make one like a biquad wifi antenna.

    I think using reflectors would be fun. any idea?

    A reflector would be difficult to get right. A parabola at the location you’ve drawn does not help: it’ll just increase the interference. A parabola only works if the transmitter is in the focal point of the parabola.

    You May Like: Find Out Wifi Password On Mac

    How Can I Boost My Wifi Signal From My Router

  • Connect your router devices with a data cable.
  • If youre planning to use your router locally, make sure its set to an appropriate location.
  • It is too interconnected.
  • Ensure that your router is in good working order and you perform regular updates.
  • Make the switch to an alternate WiFi channel on your router.
  • The wireless network must be set up meshy WiFi system.
  • Question: Can Tv Antenna Be Used For Wifi

    An antenna can boost your Wi-Fi reception. A rooftop television antenna, sometimes called a yagi antenna, can be modified for use with a wireless Internet network card. Many rooftop antennas also have a motorized mount, which allows them to be turned toward a strong signal.

    Read Also: Free Wifi At Dunkin Donuts

    How To Install It

    The next step is installation. On Windows, youll be given a choice between installing just the hardware driver, or running the device through a wireless utility. If you opt for just installing the driver, youll end up being able to run the N300 through Windows wireless network manager just like a regular wireless network. While this is pretty straight forward, TP also offers its own wireless utility. Its basically just a program that gives you a little extra control over your wifi. For example, the utility has a great signal strength indicator. Its much more accurate than any third party software youll find, and gives you a nice percentage breakdown of the quality and strength of your signal. For most users, this utility might seem like an unnecessary over-complication of the installation process, though some people might appreciate it, nonetheless. Whichever route you go for, you shouldnt expect anything too complicated.

    If installation doesnt automatically start, theres a CD included . Plus everything you need can be downloaded from TPs website.

    The router was one floor and two walls away from me when I wrote this post. My laptop would not detect the signal without the antenna.

    Check Channel And Frequency

    How To Boost Your WiFi Router Signal

    Having your router on the same channel as those in neighboring homes or apartments can cause interference and prevent optimal Wi-Fi performance.

    The most common channels for the default 2.4 GHz frequency are 1, 6 and 11, and if your closest neighbors are using the same channel you are, its likely youre both getting less than you should from your signal.

    How can you figure out which channel is being used the least in your area? There are many tools available to analyze signal use, including an app for Android called “Wifi Analyzer” and inSSIDer for Windows. These tools look at nearby networks to determine which channels have the heaviest usage.

    Once you know what to avoid, go to your routers wireless settings and pick the channel with the least traffic. While youre making changes, try switching the frequency from 2.4 GHz to 5 GHz.

    This may offer a performance boost if you have a dual-band router or recently upgraded to the AC Wi-Fi standards. Not only does 5 GHz support up to 1300 Mbps speeds, its also used by fewer devices and should provide more stability for Wi-Fi connectivity.

    Don’t Miss: Blink Camera Change Wifi

    Check Your Wired Internet Connection

    Before you blame the Wi-Fi, make sure the internet coming into your house is performing as it should. Find an Ethernet cable and plug your computer directly into your modemyou may need a USB to Ethernet adapter if your laptop doesnt have an Ethernet port.

    Run a speed test to see your internet speed. If it doesnt match the speed on your internet bill, you may need to call your ISP or replace your modem. If your speed test does match your internet bill, but it still seems slow, it may be time to pony up for a better plan.

    If the modem seems okay, try running the test again wirelessly, standing right next to the router. If you get similarly good speeds next to the router, but not elsewhere in the house, then your Wi-Fi coverage may be to blame. If your internet is still slow standing right next to the router, you may have some outdated gear that needs an upgrade.

    Dont Forget To Reboot

    A simple reboot is often enough to improve your WiFi speeds. A reboot clears the routers memory and allows further updates to install into the WiFi router.

    Reboot is a simple process you just need to press the restart button located on the WiFi router back or simply disconnect the router from power and then turn it on again. Then the router will reboot.

    During reboot process you can see that updates are going to install. This may takes few minutes. Dont interrupt the updates manually.

      Recommended Reading: How To Have Two Routers On One Network

      Popular Articles

      Related Stories

      Stay on op - Ge the daily news in your inbox