How To Broadcast Wifi Over Large Area

Its Not Rocket Surgery

Extend WiFi range without range extender

My wide-area wireless home network has been online for nearly a year now, and theres only been one outage when the omni-directional point lost power. When it came back, I had to reset the point and redo the setup but five minutes later every building was back on the same shared WiFi network.

My network hardware looks like this now, and its pretty stable. Everything is fairly reliable with problems only cropping up once every few months, like when an outbuildings WiFi point drops, I get an instant alert and its usually a power outage or other non-internet problem causing it.

The good news is if you have a big backyard or a shed at the corner of your yard that cant quite connect to your house WiFi or if want to share your connection with your neighbor or live somewhere with a few hundred feet between buildings, two $85 points and an extra WiFi point at the other end can be enough to spread your connection across great distances without having to dig holes or bury cables.

Install An Additional Wifi Router

Alternatively, some choose to install an additional router in their home to extend WiFi coverage. However, this method requires network cabling at all the appropriate access points within your home, making initial setup and maintenance complex and expensive. Furthermore, installing an additional router does not circumvent the login disruptions, nor the bandwidth issues, described in the previous method.

Use The Right Equipment

Extending WiFi range in an office or commercial environment requires not only the right equipment, but the right amount of equipment. Depending on the size of your office, the number of connected devices and the type of work performed over the wireless network, you may need 2, 3 or even more APs to fully cover your entire space and to support what can easily be hundreds of devices connected to your network. Offices with bring your own device policies need to prepare their network to support the laptops, phones, tablets, smartwatches and other gadgets that their employees might connect to the network on any given day.

There are hundreds of wireless routers and access points on the market and they all have their pros and cons. Keep in mind that some equipment is designed to support hundreds of simultaneous devices, but may not be able to support high speed data transfers. The equipment you use should be researched and selected based on your specific needs. The research and selection process can be daunting. If youd like help, we recommend working with a company like Made By WiFi, that can help you select the right equipment and even install it for you. Learn more about our professional wireless network installation services and office WiFi solutions.

Also Check: Do Southwest Flights Have Wifi

How To Cover A Large Area With Wifi

Although some people say that positioning your router in a better place increases the routers overall coverage, we dont think this will be a good solution to this noticeable issue.

Since we work hard to make our shared methods 100% useful, here were going to show you two best ways to cover a large area with your wifi.

  • WiFi Range Extender
  • WiFi Mesh System
  • The Orbi Outdoor Extends Wi

    Will Wi

    An outdoor Wi-Fi extender, sometimes called a wireless access point or wireless repeater, is perhaps the most straightforward option, since it’s the only solution that involves installing hardware outside. Many of these devices are enterprise-grade, but some manufacturers have recently come out with consumer-grade outdoor extenders, like the Netgear Orbi Outdoor. These devices are made to be exposed to the elements year round and have hardware capable of communicating with your router wirelessly in order to give you great Wi-Fi coverage outside your home.

    The first step is to find an extender that’s compatible with your current router or purchase a new router and extender to upgrade your entire network. There aren’t a ton of wireless extenders designed for outdoors, but a few notable manufacturers are Netgear, Ubiquiti, EnGenius and Hawking.

    Next, check the ingress protection rating on the packaging and the temperature range the device can withstand. The IP rating defines how weather resistant the device is, mainly against dust and water. The highest rating is IP68, which means it’s totally protected against dust and can withstand long periods of immersion underwater.

    The EnGenius ENS620EXT extender can be mounted anywhere outdoors.

    Read Also: Reset Blink Sync Module

    Not All Mesh Wifi Systems Are Created Equal

    All mesh systems are slightly different, so its important to examine the technology that each brand uses. For example, some tri-band systems are better than others, and some dual-band systems have bandwidth limitations. Take a close look at the tech being offered to ensure that your whole-home WiFi projects an effective, efficient signal that blankets every corner of your home with WiFi connectivity.

    The Easy Option: Move Your Router

    The first step to extend WiFi to the back yard is to see if you can move your router closer to where you want to use the internet. With a longer cable, your router can be more mobile inside your home and can be placed where it will broadcast the WiFi signal to your back yard. Be sure to keep your router away from heat sources and in an area that has good circulation to prevent overheating. If you can, move your router to a high spot to avoid any barriers, like walls or trees.

    Note that if you move your router, it may affect the other internet-connected devices in your home and affect their functionality. Only move your router if it does not impact the rest of your family.

    Recommended Reading: Change My Optimum Wifi Password

    Things To Avoid When Covering A Large Area With Wifi

    There are a few thing you will want to avoid immediately when planning a large area WiFi solution. While these solutions may work in certain situations if the proper expectations are set and the performance limitations are understood and viable, we would recommend avoiding them altogether.

    Double NAT Networks A double NAT is when you connect one router behind another router. For example, connecting your TP-Link router behind the router provided by your internet service provider. While this approach will allow you to connect to the internet, you are technically creating a whole new network rather than extending an existing one. You may also run into issues when playing games online, connecting to a VPN, opening certain ports or other advanced networking configuration. Even if you broadcast the same network name and password across both routers, you will still be broadcasting two seperate networks and will not be able to communicate with other devices connected to the same network. Sorry, MacGyver, this isnt the way to cover a large area with WiFi.

    Both double natting and mesh WiFi networks are usually only implemented in residential environments due to their affordable price points and lack of advanced networking capabilities. Honestly, the residential market is where these types of solutions belong and should almost never be implemented in any type of commercial environment.

    C Router Converted To Wap

    Xfinity Internet: How to get the most WiFi coverage in your home

    Many people like to use a second wireless router toextend their network because they have one readily available. Its a great ideabecause you can save some cash, but requires an extra step beyond setting up ageneric WAP. We essentially need to dumb down the router and make it a simpleWAP.

    Ethernet connection diagram. Credit: Linksys

    Disconnect your computer from the main network andconnect it to one of the LAN jacks on the 2nd router . Power on and the 2nd router. Set the wireless SSID, encryption, andpassword so they are identical to the main network. Set the wireless channel soit is different than the main router. Next, assign the 2nd router anIP address outside the DHCP range of the main router, but within the subnet. Ifthese were a simple WAP, you would be finished. But there is one last step.

    DHCP Disabled

    The last step is to turn off DHCP on the 2ndrouter, making it WAP with built-in switch. Disable DHCP and save the settings.Now you need to connect an Ethernet cable from an open LAN port on the back ofthe main router to an open LAN port on the back of the 2nd router.Make sure you are using a LAN port on the second router, not the WAN port youwould normally use if it were the DHCP server for the network.

    Also Check: Can You Have Two Wifi Routers In One House

    Thoughts On How To Extend Your Wifi To The Back Yard

  • Ryan B. Uncksays:
  • CenturyLink welcomes respectful and thoughtful comments related to the blog content. All comments require approval, and we reserve the right to remove any comments that are off-topic, inappropriate, spam, abusive, or being used to promote and solicit for third-party sites, initiatives, or products. Please do not post any private information unless you want it to be available publicly. For assistance with your service, please visit our support center for self-help options or to connect with our customer success team.

    Trending Discover Topics

    Get Some Extra Cable And Move Your Router

    This might be the easiest solution but also one you might not want to do. Routers are ugly to look at after all, which is why most of us hide them in a cabinet, under a desk or in some out-of-the-way location in our homes. The problem is that where you place the router is a huge factor in its signal quality. The signal can be halted by thick walls, pipes, large appliances and any other dense objects, which is why its best to place them out in the open. To get better Wi-Fi on your deck, it could be as simple as buying a longer ethernet cable and an acceptance that its OK to see your router a few times a day.

    You May Like: How Do Portable Wifi Hotspots Work

    How To Boost The Wifi Signal Through Walls

    I have recently moved to a new office and its an older building with concrete walls and, since, naturally, the WiFi refused to cover the entire space, it made me wonder how can one boost the WiFi signal through walls? There are a few ways to easily do it, from using a mesh system which would hopefully inter-connect over a longer distance and not use up the entire bandwidth with the backhaul traffic to the far more reliable wired access point. There are also some very unstable ways to boost the WiFi signal through walls and, unfortunately, these are the most popular ways that people do it.

    I am talking about WiFi extenders which are usually terrible, but do provide some relief in areas where the WiFi simply does not want to reach and then theres also the powerline adapter. The latter has been growing in popularity and rightfully so since its a reliable option, but only if the electrical wiring was designed with them in mind from the beginning.

    Yes, newer homes can be configured any way you want them, so you could create circuits for powerline adapters, although why not simply use Ethernet cables? And yes, the cables, be it Ethernet or fiber optics, they do remain the most reliable ways to have Internet anywhere in your home. That being said, lets explore some of the available options.

  • 4. Use a powerline adapter to get Internet in difficult-to-reach areas
  • Determine Your Computer Ip Address

    FCC takes first step toward over

    Open up the command prompt.type cmd, and press enter. A command prompt like the following will appear.

    Type ipconfig in the windows command prompt and press Enter.

    Locate your computer IP address and router IP address in the output from the ipconfig command.

    The ip address of the computer you are using will be listed under IPv4 Address, and the Router IP will be listed as the Default Gateway. In our network, the router address is and our computer ip address is

    It is important to note that the default IP address for the AP and wireless camera are as noted below, which work perfectly with a network where the router is

    • Wireless camera:
    • Wireless Ubiquiti AP:

    You may need to change the the ip addresses of either or both if there is a ip address conflict or they don’t fit your network. You can follow instructions provided in How to view IP Cameras from a web browser on how to change the camera IP address. You can also find instructions on how to change the ip address of the access point here.

    Since the default IP for both devices works for us, let’s proceed.

    Also Check: Bravia Wireless Link

    We Fix Poor Wifi & Cell Signal

    If poor WiFi or cellular coverage is affecting your home or business, get in touch with the RF experts at Simple WiFi .

    We solve weak signal & coverage 24/7, because we’re field experts, meaning we’ve been rolling up our sleeves and doing this for homes and offices with precision for many years compared to the guy with a truck and ladder and “theoretically” can do it.

    You don’t want theory, you want results. That’s what we provide.

    Free consultation with our Miami-based customer support or call us at 305-798-8505.

    Turn Off Mimo Signal Transmission On Ubiquiti Radios

    As of December 2015, almost all of the wireless AP in the supply chain for new products are MIMO enabled. Which means you can only access them with another MIMO enabled access point or laptop. Laptops with MIMO support are scarce, so it is best to turn of MIMO signal transmission. If you are going to be using another identical AP to receive the signal, then of course you want to leave it on.

    Here is how you turn MIMO off on Ubiquiti access points: a) Click on the tab containing the Ubiquiti logo. This is the airMax section.

    b) Uncheck the ENABLE box next to airMax, and click CHANGE. If a blue bar appears on the top of the page, be sure to click APPLY.

    Now the AP is configured to be used as the WiFi signal on the camera. Let’s proceed to configuring the wireless ip camera.

    Don’t Miss: Delta Sky Club Wifi

    Indoor Range Extenders Are Cheaper Less Reliable

    You can replicate the mesh setup mentioned above with a regular router combined with indoor Wi-Fi range extenders or repeaters. This option is a little more affordable. The extenders would be in place of the mesh satellite units. The setup is slightly more complicated, but if you follow the quick start guide included with the extender, you shouldn’t have much of an issue.

    Also, make sure that the extender you purchase is compatible with your router, especially if it is older. For simplicity, look into extenders made by the same manufacturer as your router. Many newer devices devices are mix-and-match though, like the D-Link AC2600 Wi-Fi extender , which is advertised to help extend Wi-Fi into your backyard and is compatible with any router.

    D-Link’s AC2600 range extender is compatible with any router.

    Keep in mind that most wireless extenders will cut your Wi-Fi in half, because they receive the wireless signal then rebroadcast it using the same radio on the same channel. Expect your speeds, when connected to an extender instead of the router, to be slower. One way around this is to use a tri-band extender, which has an extra 5GHz network that can act as a dedicated link to your router. This will help you get the maximum bandwidth out of the extender.

    The Linksys EA8300 Wi-Fi router can also be used as a wired access point or a wireless extender.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox