Cisco Wifi Modem Settings
Open an Internet browser and, in the address bar at the top of the page, enter the following: , and then press the Enter key.
Log in to the Advanced WiFi modem page with the following information:
Video Tutorial: Changing The Wireless Channel On Your Modem
WiFi modems have a limited range which can be affected by radio interference, physical obstructions, and distance, so keeping the device in a central and unobstructed location in your house will ensure the widest possible area of coverage. Before changing your wireless channel, ensure that your WiFi modem is in a central position in your home.
Do you want to change the wireless channel on your modem? For a quick and simple walkthrough, please see the video below. For written, step-by-step instructions, please continue to the Getting Started section.
Video Tutorial: How to change the wireless channel on a Shaw modem
Can’t view the video? .
How Can I See Which Wi
There isn’t a direct equivalent for iOS, and apps in Apple’s App Store aren’t allowed to report signal strength either, so it’s best to use Android or Windows apps.
Start by ensuring your phone or tablet is connected to your Wi-Fi network and then open the app. You can tap on 2.4GHz and 5GHz at the top to see how crowded each one is, and which channel your own network is currently using, plus how strong the signal is where you’re currently standing.
Note: Signal strength is measured in dBm, and a lower value is better. -30 is the best you can get, but anything down to -60 is a good signal. The minimum you want is -67dBm.
The app shows a graph of all the Wi-Fi networks in range and uses different colours to represent each network. You can also see the channels they are currently using along with the strength of signal .
This will give you an idea of whether your network has a strong or weak signal and whether the channel is currently set to is crowded or not. This will help you decide which channel you need to use. It’s worth noting that out of 13 channels, all but 1, 6 and 11 overlap. So pick a channel as far away from your neighbours’ if possible.
Both your router and your phone must support 5GHz Wi-Fi for this to work.
Read Also: Can You Have 2 Internet Routers In One House
How To Configure My Basic Wireless Setting On Tl
485807This Article Applies to: Note:2. How do I configure my wireless network on TL-LINK11N wireless router.Dual Band Selection Dual Band SelectionStep 1Wireless 2.4GHZ-> Wireless Settings Wireless Network Name or SSIDRegion:“Enable SSID Broadcast”Step 2Save Note: saveStep 3Wireless-> Wireless Security WPA-PSK/WPA2-PSKWPA/WPA2 PersonalVersionPSK Password: WEP64-bit128-bit152-bitSave Step 5system tools rebootFor 5 GHZ wireless network Step 1Wireless 5GHZ-> Wireless Settings Wireless Network Name or SSIDRegion:Channel is on Auto. “Enable SSID Broadcast”Step 2Save Note: saveStep 3Wireless-> Wireless Security WPA-PSK/WPA2-PSKWPA/WPA2 PersonalVersionEncryption: PSK Password: WEP64-bit128-bit152-bitSave Step 5system tools rebootFor Guest Network Guest Networkguest networkHow do I configure the dual band wireless routers guest network NotePlease refer toHow to upgrade firmwareSystemTools-> RebootConfirmation: Note:Get to know more details of each function and configuration please go to to download the manual of your product.
How Do I Change The Wi
We don’t recommend manually changing wireless channels on the BT Hubs as this turns off Smart Wireless. When Smart Wireless is on, the Hub will automatically select the wireless channel with the least interference, changing to a different one if it gets too congested.
If you think your wi-fi isn’t working as it should, use our wi-fi checklist to help you get the best connection >
If you still want to make sure you’re on the best wireless channel, we recommend you do a refresh rather than choosing a wireless channel manually.
This means the BT Hub will always choose the best channel available. And Smart Wireless will automatically monitor the channels to maintain a good connection.
If you decide to continue with manual channel selection, this will turn off the Smart Wireless feature.
Recommended Reading: How To Reset Blink Camera System
How To Change The Frequency On Your Wireless Doorbell
Ok, so now you have figured out why you might need to or want to change the frequency on your wireless doorbell due to interference issues.
Now you need to figure out how to change the frequency. Lets go over this in a step-by-step manner.
There are a few different types of wireless doorbells, so we are going to go over each of the 3 types right now.
How To Change Your Routers Wi
To change WiFi channel, you first need to enter its admin interface. This is usually done by entering a specific IP address in your web browser , but some newer routers come with a companion smartphone app.
The IP address should take you to the login page to your routers admin interface. Unless youve changed the default login name and password to something else, you should be able to log in by entering admin as both the username and password. If it doesnt work, consult the manual that came with your router or get in touch with the manufacturer directly.
Once youre inside the admin interface, you need to find the WiFi channel setting so that you can change it to your preferred channel. Because all routers are different, we cant give you detailed instructions here, but it should be located under Wireless Settings or Advanced Settings.
After youve changed the WiFi channel, the only thing left to do is to restart your router. As you can see, learning how to change a WiFi channel on your router is easy, and the whole process takes just a few minutes.
Recommended Reading: How To Change Wifi On Blink
Changing The Frequency Some Tips To Keep In Mind
- If you are going to be working around electronics, it is always wise to turn off the power source first. Dont electrocute yourself!
- Sometimes these frequency switches can be small and delicate, so you may want to use small pliers to move them.
- Be sure to change the frequency to one that is different from your neighbours, or else this whole exercise is futile.
- Be sure that you set the frequency of the chime and the button to the same level. They have to be running on the same frequency, or else the whole thing will not work.
- If you have a wireless doorbell with a digital display, you do not need to remove the cover or turn off the power. Simply use the display to make the appropriate changes.
How Are 24 Ghz Wifi And 5 Ghz Wifi Different
There are four main differences between the 2.4 GHz WiFi band and the 5 GHz WiFi band:
You May Like: Use 2 Wireless Routers
Is 5ghz Wifi Better For Gaming
In general, it boils downs to wireless range vs. speed. If you want better range, use 2.4 GHz. If you need higher performance or speed, the 5GHz band should be used. The 5GHz band, which is the newer of the two, has the potential to cut through network clutter and interference to maximize network performance.
How Do I Change My Wifi Channel
Using the Admin Tool
You May Like: Does Netgear Extender Work With Spectrum
How Do I Change My Wifi To 5ghz
How to Use the 5-GHz Band on Your Router
What Is A Wifi Channel
Most WiFi routers these days broadcast data using the 2.4 GHz and 5 GHz frequency bands. Each of these bands is divided up into channels that are used to send and receive data over your WiFi network.
You can think of the 2.4 GHz and 5 GHzfrequency bands like two highways, and the WiFi channels are like lanes on thosehighways. If you wanted to pick the fastest lanes on either highway, you would wantto choose the ones that have the least traffic.
If youre using the 2.4 GHz band, channels 1, 6, and 11 are usually the best choices because they dont overlap with each other.
On the other hand, if youre using the 5 GHzband, there are 24 non-overlapping channels you can choose from.
To find out more about the differencebetween 2.4 GHz and 5 GHz, and which one youshould use, check out our article here.
Many routers use the same channel by default. So,if you dont change your WiFi channel, your router will probably use the samechannels as all your neighbors, which could slow down your WiFi signal. Hereshow you can change your WiFi channel on a router.
You May Like: Forgotten Wifi Password Mac
How To Change Wifi Channel
Michael GrothausThis blog post may contain affiliate links
In our modern and ultra-connected age, with a Wi-Fi signal coming from every coffee shop, pub, and phone booth, its very easy for networks to overlap and interfere with each other. This is made worse when theyre operating on the same channels. When a router is set up, itll pick a channel for whatever frequency its on , with each frequency having its own bank of channels.
Sometimes the router may pick a channel on set-up that isnt particularly busy, ie: there arent many other neighboring networks also on that channel competing for bandwidth, but over time, as more networks get set up around you, its possible for the channel youre on to get quite crowded and for your connection speeds to drop as a result.
You can manually pick another channel using the method outlined below, allowing you to opt for a channel that not many other local networks are using and therefore potentially improving your speeds.
While you can just hop from one channel to the next and see which has the better connection for you, its a bit more efficient to use an app tool to discover which are less crowded.
Running the app should show you a table of nearby networks, the channels they are using, and the strength of the signal including your own. You can use this visual information to get an idea of which channel might be worth going for.
How To: Change The Wifi Channel On Shaw Modem
You may need to change the wireless channel on your Shaw wireless modem if you encounter WiFi signal interference. While the wireless channel is set automatically by your modem, you can select a specific channel in the advanced settings for your modem.
For a brief tutorial on why you might want to change your modem’s channel, please watch the video below.
Recommended Reading: Google Wifi Number
Changing The Wifi Settings Of The Linksys Dual
Linksys Dual-Band WiFi RouterBefore you begin:
- Changing your WiFi settings will disconnect all wireless devices from your router. You must reconnect them using the new settings.
Step 2:Wi-FiStep 4:Network Name NOTE:QUICK TIP:Channel AutoStep 2:Wi-FiStep 4:Step 5:PassphraseSecurity ModeNOTE:SaveNOTE:Related Articles:
Was this support article useful?
Thank you for your feedback.
Please tell us how we can make this article useful.
How Do I Know If I Should Change My Wi
Dont change your Wi-Fi channel for no reason. Lets check and see if your Wi-Fi problems might be channel-related first. To do that, youll need a good Wi-Fi analyzer app. For this article, were using Wi-Fi Analyzer on Android.
In the next two images, the white lines help us see what channels are being used. Each arc represents a Wi-Fi router. In the 2.4 GHz graph, channels 1, 6, 9, and 11 are being used. Each channel is being used by multiple routers. So no one on those channels is getting the best signal.
In the 5 GHz graph, there are multiple routers on channels 132 and 149. The one we want is in channel 149, sharing with 3 other routers.
So, yes, the Wi-Fi service could improve by changing the channels. Lets do that.
Read Also: Bravia Wireless Link