How To Connect Your Alexa To Wifi With Or Without The App
- You can connect your Alexa device to WiFi website.
- You can also use the Alexa app to change your WiFi source.
- If you’re connecting your Alexa to WiFi from the website, you need to be using Firefox, Safari, or Edge.
An Amazon Alexa smart speaker can be a helpful addition to your smart home. But in order for it to work with your devices, you’ll need to have a WiFi connection established.
Here’s how to get it done, whether you’re using the Alexa app or the Alexa website.
Reconnecting Your Alexa Device To Wi
What happens if you change routers ? The Alexa device will have no idea where to connect. In this case, youll need to open the Amazon Alexa app, tap on the registered device, and change the connection manually.
Step 1: Open the Alexa app and sign in if necessary. On the home screen, select the Devices section from the bottom menu.
Step 2: In the Devices section, select the category for the kind of Alexa device you are using. For example, if you are reconnecting an Echo, choose Echo and Alexa.
Step 3: You will now see all devices that are labeled as part of your Amazon account. Choose the device that you want to reconnect.
Step 4: Under Wi-Fi Network, tap Change.
Step 5: Verify the Alexa device is plugged in and displaying a light.
Step 6: Select the detected device from the given list.
Step 7: Choose a Wi-Fi network and supply the password.
Getting Alexa Back Online
While Alexa can be very helpful, it’s only good when it can connect to your Wi-Fi network and get on the internet. Hopefully, with these steps, you’ll find the bugbear within your network and get your Amazon Alexa device back online.
Once Alexa is back on the internet, did you know that there are a bunch of voice commands you can give it to make your life easier? From adjusting the volume via voice control to picking a number within a range of numbers, Alexa can do more than you think.
Read Also: Can I Have 2 Routers In One House
Reset Alexa Device To Factory Settings
In case, all the above-mentioned methods to fix the situation when Alexa cant connect to the internet doesnt work, resetting the device is the last resort option.
- To reset First Generation Echo: Bring a thin pin or a paperclip to press the button at the bottom of the device. The Echo dot turns orange and then blue. Now release the button and light will turn off and automatically turn on.
- To reset Second Generation Echo: Press and hold Volume down button along with the Microphone off button simultaneously. The light ring turns orange and then blue after a few seconds.
- To reset Third Generation Echo: Locate the Action button and press it for approximately 25-30 seconds. The ring light will turn orange and finally turns off. Please wait for some time as the light will turn blue in some time and once changes itself to orange color. Now you are ready to set it up once again.
As I told you earlier as well, my Alexa wont connect to Wi-Fi until I brought them closer and removed the interruptions in between. Thats why I am so sure that one of the methods above will work for you too. Now which of them suits you, write us down in the comment section below.
Reposition The Alexa Device Or Router
If your router and Alexa device are a little bit apart, make sure theyre close enough for a solid connection. Amazon recommends a maximum distance of 30 feet or 10 meters between the two.
If they are relatively close together, make sure nothing is sitting in the middle that may interfere with the Wi-Fi signal. For example, if any other devices use Wi-Fi sitting in the way between your router and your Alexa hub, their signals may interfere with the communications.
Also, ensure that there are no metal objects between the two. For example, microwaves can be a huge Wi-Fi signal killer, so be sure to move them out of the way of those. Wi-Fi signals also struggle to get through thick walls.
Read Also: Ddguestwifi Login
How To Set Up Your Alexa After Moving
Here’s how to set up Alexa once you’ve moved into your new spot:
Connect your Alexa device to the Wi-Fi at your new location. This is basically the same process you went through when you first set up your Alexa device, but you have to manually force the device into setup mode. This is usually accomplished by pressing and holding the action button on your Echo.
If you’re unable to connect to your new Wi-Fi network, you may need to reset your Alexa, then set it up like a new device.
Once your Alexa devices are set up to work with your new Wi-Fi network, you’re ready to start using them. However, there are a few other settings you’ll want to tweak to make sure everything runs smoothly.
If you have several Alexa devices, and you have control over your new Wi-Fi network, consider setting up your new Wi-Fi network using the same SSID and password as your old network. Your Alexa devices will connect automatically, and you won’t have to individually set up each.
Tell Alexa your new time zone. This is similar to telling Alexa your new address, but it’s only relevant if you’ve moved a little further than across town or a few cities over. If you’ve actually moved to a new time zone, you’ll need to tell Alexa, thereby enabling it to tell you the correct local time, among other things.
Open the Alexa app, and tap Devices> Echo & Alexa> your echo device> Time Zone. Select your new time zone, then tap Change. Repeat this process for each of your Alexa devices.
Tap The Continue Button Back In The Alexa App
This brings up the Echo Dot Setup-> Connect your iPad to Echo Dot creen, as shown next. This screen stays up until you link your mobile device to the speakers WiFi network. Do that in the next step.
The speaker then creates this Amazon-xxx ad hoc network for setup purposes. Continue with the next step to link your mobile device to the speaker.
You May Like: 2 Wifi Routers In One House
Restart The Router As Well As Echo
Yes, you need to restart the router if your internet connection is slow or Alexa cant connect to the internet. Its a small but universal fix to try as many of the technical glitches solve when you shut down the router and restart again after 1-2 minutes. Similarly, try restarting Echo or Alexa enabled devices, and you can be hopeful of setting up the connection between the two once again.
How To Connect Alexa To Wifi Without The App
To set up a new device using a browser, you have to be using Firefox, Safari, or Edge. will not work for device set-up.
1. Go to and log in to your account.
2. Choose Settings in the left sidebar.
3. Under Devices, select Set up a new device.
4. Choose the device you want to connect.
5. Turn on your device, if needed. The ring light should be orange.
6. Choose a WiFi network that’s marked as Amazon-XXX.
7. Hit Continue in the browser.
8. Choose the network you want to connect to and enter the password.
Read Also: How To See The Password Of Your Wifi Mac
Problems Connecting To Wi
You may experience a few different issues when setting up your Alexa device:
The app doesnt see my new deviceIf your Alexa app cannot see your Alexa-enabled device, ensure it is in setup mode and its light is orange. If your device is not in setup mode, you can force the process by holding down the Action button on the unit for 15 seconds.
Echo cant find Wi-FiIf your Echo device is having trouble connecting to your Wi-Fi during the setup phase, take these steps:
Step 1: Turn off the device and wait a few minutes before turning it back on. If the issue is still there, go to step 2.
Step 2: Take a look at your modem. If it looks normal, move to step 3. If you notice that any indicator lights are either off or flashing, unplug the modem, wait 30 seconds, and then plug it in again. If all the LEDs become steady, you can move on. If not, you may have an ISP problem.
Step 3: If the modem looks good, restart your router . If your device still doesnt connect after you reset your entire network, go back to step 1.
Step 4: If nothing else works, move your Alexa device closer to your router. Your signal might just be too weak.
How To Change Alexa Voice In 2021
Don’t take that tone with me
From Samuel L. Jackson to a male alternative to the standard Alexa voice, learning how to change Alexa voice can be both entertaining and refreshing. Who wouldnt want Jacksons foul mouth abusing them from their bedside table? Lagging behind the competition, Alexa is finally giving users a small handful of customizable voices, although the celebrity voices cost $5.
You can either change voices via the Alexa App on your Android/Apple handsets or change them directly with your Echo device. It must be said that only the male alternative to Alexa covers all Alexa features, with celebrity voices mostly covered standard features such as alarms, weather forecasts, and jokes. Also, if you have multiple Alexa-Enabled devices, you must repeat these steps for every device.
Read Also: Can You Connect 2 Routers Together
Tap Your Desired Wifi Network
Pick the network to which to hook up Alexa speaker, on the Choose Your Wi-Fi Network screen above. In our case, we picked the 937T681J4059H_2G_Guest network. If you never linked with this network before in your Amazon account, the app asks for a password, shown next. The screen you see may differ slightly. But the password prompt function is the same.
A password request may not appear to hook up Alexa. Why not? When youve previously entered this WiFi network on Amazon, the system remembers that password for this network. You probably saved WiFi networks to Amazon when you connected any Alexa speaker before. So, the app issues no password prompt if your account has this WiFi network saved.
How To Change Alexa Wifi Connection
How to change Alexa WiFi connection? First, put the Alexa based speaker into Setup mode. There, you choose the desired WiFi network. Thats a simple summary of how to switch WiFi networks for Alexa speakers.
Below, we walk through changing Alexa WiFi connection with an Amazon Alexa Echo Dot 2 speaker. But, this WiFi change process is about the same for the other speakers. These include the Dot 1, 2, and 3, the Echo 1 and Echo 2, and the Tap. We do this demo on our iPad iOS tablet.
If youre just changing the WiFi network, use this less involved procedure. This keeps other settings for the speaker saved. We cover both cases here. Armed with your mobile device and the Alexa app, changing the WiFi connection on this Alexa smart speaker is painless, as follows.
We assume that you linked the Alexa App to your Amazon account before.
Note also that we took the screen shots below from an Apple iPad Air. But a similar Alexa app for Android is available from the Google Play store.
Recommended Reading: Where Is The Reset Button On The Blink Sync Module
How Do I Change My Wi
Sometimes, youll need to change your Wi-Fi details with Alexa. If you change your Wi-Fi passphrase or move to a new location with different Wi-Fi information, this will be necessary.
If Alexa is having difficulty connecting to Wi-Fi, youll see a flashing red ring. Alexa will also say, I am having trouble connecting to the internet. Take a look at the Help section in your Alexa app.
To fix this, if youve already set up your Echo, Echo Dot, Echo Show, or other compatible Alexa device, you can change the Wi-Fi settings from within the app. In the Amazon Alexa app on your phone, tap on the Devices icon in the lower right-hand navigation and select Echo & Alexa.
From there, choose your Alexa-powered device. The app will take you to that devices settings. In the Wireless section, tap Change next to Wi-Fi Network and follow all of the onscreen prompts to change your Wi-Fi network or password.
If you do not see your network listed, scroll down and tap Add a Network.
If your Alexa-powered device is not discovered, make sure that youre within range , check that its plugged in correctly, and put it back into Setup Mode by pressing and holding the action button until the light on your device turns orange before hitting Continue.
You might need to press and hold the Action button again until the light on your Alexa device turns orange.
How To Change Wifi Settings On Alexa Echo Dot
1 of the kickoff things yous demand to do after getting an Alexa device is to connect it to a WiFi network. So, if you change your WiFi network or attempt to use your Alexa device in a new place with a dissimilar WiFi network, your device just won’t piece of work. Here’south how to connect your Alexa device to a new WiFi network with or without the app.
If yous’re setting upwardly your Alexa device for the outset time, bank check out our guide on how to gear up upwardly Alexa on an Amazon Echo smart speaker.
You May Like: Optimum Wifi Passpoint Password
One: Use The Smartphone App
Most Echo speakers, such as the and , dont have a screen, so youll need to use the Alexa companion app on your smartphone to change settings, including Wi-Fi. The app is available for both iOS and Android, and the process is identical on both and for all Echo speakers.
Open the app, then open the navigation panel in the top left corner, and select Settings at the bottom of the panel. Now select Device Settings and tap on the device you want to change networks on.
You should see an entry labelled Wi-Fi network press Change to its right. A new screen will appear inviting you to Begin Echo Setup press Continue at the bottom. Make sure your Echo device is powered on and is showing an orange light if its glowing blue, press and hold the Action button for six seconds until it changes colour.
Your smartphone may now connect to your Echo device, or you may have to manually connect through your phones Wi-Fi settings menu. Your device will have a custom-named Amazon network .
Once you are connected and back in the Alexa app, a list of available Wi-Fi networks should appear. Select the one you want and enter the password , then hit Connect. For hidden networks, scroll down to the bottom and tap Add a Network. A progress bar may appear with the message Preparing your Echo. After your device connects, a confirmation message should appear and your device is ready to use.