How To Change Wifi Router Password

Open Routers Configuration Page

How to change Wifi password on Dlink router| Wifi password change on D-link Router DSL-2750U

Use a web browser on a computer connected to your network. You can also use an Ethernet cable to connect your computer directly to the router.

*Open the Command Prompt by pressing the Windows key + R and entering cmd. Once the Command Prompt opens, type ipconfig and press Enter. Look for your active connection in the list and find the Default Gateway address. This is your router address.

If this doesnt work, you can press and hold the Reset button on your router for about 30 seconds to revert it to factory default settings.

How To Change Your Ssid

SSID is really just a fancy term for network name. As youre probably aware of, all Wi-Fi networks are uniquely identified by a sequence of characters. If youve never changed your wireless router settings before, the chances are that your Wi-Fi has a very generic name. To change it to something more memorable, there are a couple of steps you must go through:

  • Enter your routers IP address into your favorite web browser.

  • Log in with the default username and password.

  • Type in your new SSID.

  • Save the new settings and wait for your router to restart.

When choosing a name for your Wi-Fi network, stay away from anything that might be interpreted as offensive. We also recommend you dont try to make it seem as if your network is a public hotspot. Using a fake name for your Wi-Fi really doesnt do anything for your privacy and security, but it can dramatically slow down your .

What Is The Username And Password For My Router

routerrouter’s passwordrouter’spasswordusernameComplete these steps:

  • Open a web browser such as Internet Explorer.
  • Go to the Address bar and enter the IP Address of your router then press Enter. For example, 192.168.15.1 is the default IP of most VOIP routers.
  • A new window prompts for a User name and Password.
  • Recommended Reading: Can I Have Two Routers In One House

    How To Change Your Routers Login Information

    The first thing you should do after gaining access to your router is change the default password to something more secure. If you were to leave the default password as it is, someone else could just walk up to your router and mess with its settings. The person could, for example, disable your wireless security and capture your personal information without you knowing about it.

    To change your routers password:

    • Enter your routers IP address into your favorite web browser.

    • Log in with the default username and password .

    • Go to settings.

    • Select Change Router Password or a similar option.

    • Enter the new password.

    • Save the new settings.

    Remember that a strong password is at least eight characters long and consists of a combination of letters, numbers, and special characters.

    How To Log Into Your Router And Change Its Password

    how to change wifi password tp link

    Contents

  • How to Change Router Password
  • There are several reasons why you would want to learn how to log into your router. Perhaps you want to change its settings so you can enjoy faster WiFi. Or maybe you want to protect your network from being hacked by changing your password or tweaking security details. No matter the reason, the following guide will show you how to log into your router, how to find the routers default password, and how to change it.

    You May Like: Find Stored Wifi Password Mac

    How To Change Your Router Settings

    To get the most out of your router, you need to learn how to change your WiFi router settings, and we are here to teach you.

    If youve never paid much attention to your router, you might be wondering why you should bother learning how to change router settings in the first place. After all, if its been working fine so far, why risk breaking something?

      How To Change Your Router’s Wifi Password

      1. Open your browser to the configuration page of your router:

      You can access your router’s configuration page through your web browser on your computer connected to your network. If you can’t connect top the Wi-Fi because you don’t know the password, you can use an Ethernet cable to connect your computer directly to the router. This will bypass the need for the Wi-Fi password.

      Typical router addresses are 192.168.1.1, 192.168.0.1, 192.168.2.1, or 10.0.1.1 for Apple. Enter this address into your browser’s address bar. If this doesn’t work then you can press and hold the Reset button on your router for about 30 seconds to reset it to factory default settings. Then you can look up the default address for your router model and enter it into your browser.

      2. Enter your router’s username and password details:

      Every router requires a username and password before you can access the interface. In many cases the default username is “admin” and the password is “admin” or “password”. Of course this varies from model to model, so you should check your model online to see your exact login information. Most D-Link routers have a default user name of admin and password of admin or blank.

      3. Open the Wireless section:

      Once you are logged into your router, you will need to find the Wireless section of the configuration page. The exact name varies from manufacturer to manufacturer, but generally you are looking for a “Wireless” or “Wireless Settings/Setup” tab or button.

      Also Check: How Do Portable Wifi Hotspots Work

      Easy Steps To Change Your Wifi Password

      7 Easy Steps to Change Your WiFi Password

      Wi-Fi gets you connected online. It is important to always keep your Wi-Fi password secure because your personal information might be at risk.

      You must keep your password protected and change it to protect your network and your data.

      Just follow these easy steps to change your Wi-Fi password:

      How To Gain Access To A Router

      How to Change your Wireless Router Name and Password | NETGEAR

      To play with your routers settings, you need to learn how to access it as an administrator. If youre on the same network as the router , you can try the simple method first:

      If you see a login window or a welcome page, youre in luck and can processed to the next chapter of this article. If youre unable to access your router using any of the IP addresses listed above, try the next method:

      • Scroll down and look for Default gateway.

      • The number next to it is your routers IP address.

      • Type the address into the URL bar of your favorite web browser.

      • If you see a login window or a welcome page, youve successfully accessed your router.

      The next step is to log in as administrator. If you havent changed your routers admin password, theres a good chance that admin will work. If it doesnt, look at the information sticker on the bottom or back of the router. Router manufacturers sometimes print the default username and password on it.

      If youre still unable to access your router, we recommend you long-press the reset button on its back and try again. Should even this fail to grant you access to your routers admin interface, try searching for help online. There are many websites, such as this one, that list routers and corresponding admin login information.

      Recommended Reading: Connecting Sony Bravia Tv To Internet

      Hide Network Name On Super Hub 1 Or 2

      We recommend that you leave the default wireless settings as they are. If youre certain that youd rather the Hub didn’t broadcast its wireless network names , you can disable it.Step 1: Enter 192.168.0.1 into address barStep 2: Login to settings page and select Advanced settingsStep 3: In the Wireless section select 2.4GHz Primary Wireless NetworkStep 4: Untick the box labelled Enable SSID BroadcastStep 5: Select Apply at the bottom of the page.Step 6: Youll see a pop-up window asking to confirm the changes, select YesStep 7: Return to the Wireless section using the button at the top of the screenStep 8: In the Wireless Section, select 5GHz Primary Wireless NetworkStep 9: Repeat Steps 4 to 6Important Note

      • The Super Hub 1 or 2 will no longer broadcast the primary wireless network names, meaning that you can connect new devices wirelessly only if you know the Hub’s wireless connection details.
      • If youve set up any Guest networks, these will continue to broadcast their network names unless you follow the above steps, choosing the appropriate network.
      • You should not rely on this as a security feature wireless ‘snooping’ software can still be used to detect the presence of your wireless network.

      How To Change The Wi

      Images may not be exactly as shown.

      http://setup.zteEnterhttp://setup.zteEnter

      Images may not be exactly as shown.

      Images may not be exactly as shown.

      Images may not be exactly as shown.

      Images may not be exactly as shown.

      Images may not be exactly as shown.

      Images may not be exactly as shown.

      Images may not be exactly as shown.

      Images may not be exactly as shown.

      Images may not be exactly as shown.

      YesYes

      Images may not be exactly as shown.

      Don’t Miss: What Is The Best Wifi Extender For Spectrum

      How To Reset The Router If You Can’t Remember The Password

      If you changed the password but don’t know what it is, and it’s not the default value for your model, you have to perform a factory reset to restore the default.

      The steps that follow are general. When executed, they wipe all of your router’s configuration settings and set them back to their out-of-the-box factory defaults. You have to change all your router’s settings, such as your wireless network SSID, password, encryption settings, and so on, after performing this step.

      Many new routers provide an app for connecting over Wi-Fi. No Ethernet cable, IP address, or password is required. If you have a new router like that, you can probably just re-pair the app with the router via scanning a code on the router. Of course, researching the how-to from the manufacturer is wise.

    • Press and hold the reset button on the back of your wireless router. You will probably have to hold the reset button from 10 to 30 seconds, depending on your brand of router. If you hold it for too short a time it will simply reboot the router, it will not reset the router so that it reverts back to its factory default settings. On some routers, you may have to use a pin or thumbtack to press the button if it is recessed inside the router.

    • Linksys: 192.168.1.1 or 192.168.0.1
    • Netgear: 192.168.0.1 or 192.168.0.227
    • You may have to consult your specific router’s manual for the correct address or check a site such as RouterIPaddress.com.

      Test Your New Network Settings

      Smart Wizard

      You have now updated the Wi-Fi network name and password. But before you pack up your laptop and go about your business, you should double-check to make sure everythings working.

      Part 1: Test the wireless connection

      Grab a device and find your new network name in the list of available networks. Enter your new password to make sure you can connect wirelessly. Its better to find out now than having to start the process all over again when youre late for a Zoom meeting or two minutes away from winning an auction on eBay.

      Part 2: Reconnect other devices

      Now that you updated the networks name and password, all the devices that were previously connected to your Wi-Fi network will need their information updated so they can reconnect. Remember that this doesnt just include all your computers and mobile devices, but smart TVs, smart thermostats, security systems, and any other devices that use your Wi-Fi network to connect.

      Is your new home Wi-Fi network too slow? Consult our guide on how to increase the speed of your home Wi-Fi.

      Read Also: Can You Have Two Wifi Networks In One House

      Is Change My Wifi Password Not Appearing On The App

      If this option isn’t appearing in your app, here are a few things you can try:

      • Go to your app store, download any available updates on the CenturyLink app, then try again.
      • Check to make sure the modem is fully plugged in and getting power.
      • Use the “Test My Service” link within the app to run a troubleshooter that can check for network issues.
      • Reboot the modem through the app or by manually unplugging it, waiting a full minute, and plugging it back in.
      • If rebooting doesn’t work, to have a service agent help you further troubleshoot the issue.

      Why You Should Often Change Your Wi

      No matter how sure you are that your Wi-Fi password is secure, make it a routine to change your passwords periodically. A safe interval between changing your password is every two to three months. This practice will keep your Wi-Fi fast and efficient and prevent interruptions from those hooked onto your source. The number of simultaneous WiFi connections can affect your download speed and slow down your connection.

      Moreover, if you have children in your home, you should change the router default admin password for safety reasons. They can access the entire network and change Wi-Fi and parental control settings.

      Now without further ado, let dive into how to change your Charter Spectrum WiFi name and password:

      Read Also: Wifi Extenders Compatible With Spectrum

      Resetting Your Router And Changing The Router Admin Password

      This article will guide you on how to reset your router to factory defaults and change the routers password.

      If you can’t access the router’s web-based setup page or forgot the router’s password, you may reset the router to its default factory settings. To do this, press and hold the Reset button for 10 seconds. NOTE: Resetting your router to its default factory settings will also reset your router’s password. The router’s default password is admin as for the username, just leave the field blank.IMPORTANT: Make sure that the Power LED of the router is blinking when you press the Reset button. This indicates that the router is being reset properly.

      NOTE: The location of the Reset button may vary for every model. Older Linksys devices may require pressing and holding the Reset button for 30 seconds to complete the reset process.

      After pressing the Reset button, unplug and re-plug the routers power adapter.

      NOTE: The Power LED of the router will keep on blinking for a few seconds after resetting as it is still trying to stabilize. However, if the Power light still isnt solid after a minute, powercycle the router. For further steps on how to resolve this issue, click here.

      Step 1:Access the router’s web-based setup page. To learn how, click here.

      NOTE: To learn how to access the web-based setup page on a MacĀ® computer, click here.

      Step 2:Click the Administration tab then click on the Factory Defaults sub-tab.

      Step 2:

      Related Articles:

      Why Should I Learn How To Change My Router Settings

      How to change WiFi password in Dlink router [2021]

      The answer is simple: because you have a lot to gain and nothing to lose. Much like its virtually impossible for you to physically damage your computer by clicking on a wrong link or messing with its settings, so are modern routers designed to be fool-proof.

      Probably the worst thing that can happen is you change your wireless router settings in a way that makes it easier for others to steal your personal information. A much more likely scenario is, however, that you learn how to change your wireless router settings to protect your personal information as much as possible.

      Knowing how to change your router settings also enables you to take full advantage of some of the more advanced features of your router, many of which you might not even be aware of at the moment. Dont worry: even if you consider yourself to be a computer neophyte, youll be able to learn how to change router settings in no time.

      Read Also: Optimum Hotspot Password

      Popular Articles

      Related Stories

      Stay on op - Ge the daily news in your inbox