How To Configure Wifi Router

How Do I Connect My Wi

How to Set Up a Wireless Router

These steps assume that you’ve already found the right router for your home. If you’re still looking to make a purchase, check out our wireless router buying guide or, if you’re looking for something a little cheaper, try our budget routers roundup, which consists of our top players under $100. If you’re looking for the fastest possible pipe with which to enjoy video gaming, then check out our gaming routers guide. All these buying guides contain our best and latest reviews in each category with every player completing PC Labs’ wireless router testing suite.

Dont Forget To Check The Router

Although we already talked about a wifi router, it never hurts to mention again because this is an important step that many people overlook. Even though the purpose of a wifi extender is to boost the range of the connection, the extender relies on a good connection with the wifi router. Again, if the router works poorly, your wifi extender setup will be frustrating and may not even work. So dont forget to check out the condition and placement of the router.

What Is Wpa2 Wpa3 Mixed Mode

When used with devices that support WPA3 Personal, WPA2/WPA3 Transitional is a mixed mode that allows older devices to use WPA2 Personal instead of WPA3 Personal . When you are unable to utilize one of the more secure options, WPA2 Personal is the best option.

Read Also: Two Wireless Routers Same Network

Connecting With Your Ethernet Cable

Without WPS it may take a little longer to connect your wifi extender, but the idea is the same. First, youll want to connect the end of your Ethernet cable, or Cat5 cable, into the Internet port on the extender and the other end into the Internet port on your wifi router.

If youve had the same internet setup for awhile and you didnt set it up yourself, dont panic. You can setup a wifi extender on your own. Cant remember what the Ethernet cable is? Its typically the blue cord.

How Do You Configure Your Router

How to Configure Wifi Router Easily within 10 Minutes

Change the Wireless Router Configuration

  • How to Make Modifications to Your Wireless Router Settings. Connect to your network either wirelessly or through an ethernet connection. Locate the setup page for your router. Log in using the username and password that you created. Locate the Wireless Settings page on your computer. Set the new channel, which is commonly done using a dropdown menu. Your router will reset at this point.
  • Also Check: How Do I Reconnect My Blink Camera To Wifi

    How To Change Your Ssid

    SSID is really just a fancy term for network name. As youre probably aware of, all Wi-Fi networks are uniquely identified by a sequence of characters. If youve never changed your wireless router settings before, the chances are that your Wi-Fi has a very generic name. To change it to something more memorable, there are a couple of steps you must go through:

    • Enter your routers IP address into your favorite web browser.

    • Log in with the default username and password.

    • Type in your new SSID.

    • Save the new settings and wait for your router to restart.

    When choosing a name for your Wi-Fi network, stay away from anything that might be interpreted as offensive. We also recommend you dont try to make it seem as if your network is a public hotspot. Using a fake name for your Wi-Fi really doesnt do anything for your privacy and security, but it can dramatically slow down your .

    How To Set Up A Wi

    The Internet is a really powerful tool. It gives us access to all kinds of information at a moment’s noticethink email, Google search, and Wikipedia. So there’s something a little counterintuitive about only being able to use the Internet when you sit down at a desktop computer. What if you could use the Internet from anywhere in your home or office?

    If you already have high-speed Internet service at your house, it’s pretty easy to create your own home wireless network. Commonly known as Wi-Fi, a wireless network allows you to connect laptops, smartphones, and other mobile devices to your home Internet service without an Ethernet cable.

    Purchase a wireless router

    To create your own Wi-Fi network, you’ll need a wireless router. This is the device that will broadcast the Wi-Fi signal from your Internet modem throughout your house. Your Internet service provider may offer you a wireless router for a small monthly fee. If you’ve never set up a Wi-Fi network before, this may be the easiest option.

    If you want to buy your own router, we’d recommend spending a little more time researching different options. CNET offers a comprehensive guide on How to Buy a Router.

    Some Internet modems may already have a built-in wireless router, which means you won’t need to purchase a separate one.

    Connect the cables

  • Once you’ve acquired a wireless router, you’ll need to connect it to your existing Internet modem.

  • Connect an Ethernet cable from your modem to the wireless router .

  • Connect!

    Read Also: Free Wifi Dunkin Donuts

    Set The New Channel Usually With A Dropdown Menu

    1, 6, and 11 are the only three channels that dont overlap on the 2.4 GHz band, and while putting your Wi-Fi network on the same channel as another network in the same band isn’t ideal, it is always a better idea to share a channel than to overlap.

    This is also a really good time to make sure that you are using WPA2 for security, and 20 MHz channels only .

    In the 5 GHz band, almost any channel is a good choice except for DFS channels. Therefore we recommend using channels 36-48, or 149-165. We recommend using 40 MHz wide channels in the 5 GHz band.

    Click Save Settings or Apply Settings to save the changes.

    Ghz 5ghz Which Frequency Should I Use

    How To Setup Wifi Router at Home? How To Setup Wireless Router For Home Wifi? Tenda

    If youre using a dual-band Wi-Fi 5 or Wi-Fi 6 router, you can connect your client devices to either a 2.4GHz band or a 5GHz band. If you have a tri-band router, you get an extra 5GHz band that you can dedicate to gaming and video streaming. A 5GHz connection will provide better performance at short ranges than 2.4GHz. This is because 5GHz, while somewhat faster, can’t travel as far or transmit through some objects due to that band’s shorter wavelengths. On the other hand, the 2.4GHz band travels further but tends to have more congestion and fewer channel options.

    That said, if you want to keep using 2.4GHz, consider experimenting with the channel selection. “Auto” usually does a decent job of hopping around the channel options and finding the best one, but if you’re struggling with client connections, try manually setting the channel to 1 or 11. The 2.4GHz band has a total of 11 channels you can switch among to avoid interference, with channel 6 usually being the default. When you select a given channel, there’s usually some signal spillover. So, selecting channel 2, for example, will often spill traffic onto channels 1 and 3. Thus, switching to the extremes of 1 or 11, the farthest points from the default of 6, can sometimes ensure the best-performing connections.

    Also Check: How To Have Two Routers On One Network

    Connect To The Internet

    Attach the router to a cable – or choose a mesh router

    To solve the “long-distance” problem when connecting a router, you can use a CAT5e or CAT6 cable to connect the router to the ISP gateway’s Ethernet port. Another option is to run Ethernet cables through the walls of your office to the chosen central location for the router.

    Yet another option is to install a mesh network with a router. A mesh network allows you to place multiple Wi-Fi transmitters across your home or office, all on one network. Unlike extenders, which can be used with any wireless router, mesh networks require a router with this capability built-in.

    No matter which option you choose, you’ll use a basic Ethernet cable, plugged into the router’s wide-area network or Internet port. The Internet port is typically set apart from other ports by a different color.

    Check the router’s LED lights

    Your router’s LED lights tell you if you’ve successfully made an active Internet connection. If you don’t see lights confirming such a connection, make sure you’ve plugged the cable into the correct port.

    Test the connection with a device

    Confirm that your router has a working connection by plugging a laptop computer into one of the device ports on the back of the router. If all goes well, you should be able to begin a wired connection, just as you did when confirming an active Internet connection.

    Configure A Second Router Without Subnetwork Support

    Subnetting or subnetwork support is useful if you love streaming HD content, without preventing your family from enjoying a stable internet connection too.

    However, sometimes the subnetwork support is unnecessary, and youd rather connect two routers without it. If you dont want to divide your IP network, you have to do a couple of things

  • Change the seconds router local IP address and change it if necessary. It needs to be within the address range of the first routers network and not conflict with other devices on the network.
  • The second routers DHCP address range should be in the same range as the first router. Another option is to disable DHCP entirely and set the IP address on every device manually.
  • Read Also: Can You Have Two Routers In One House

    Before Changing The Settings On Your Router

  • Back up your router’s settings, in case you need to restore them.
  • Update the software on your devices. This is critical to ensure that your devices have the latest security updates and work best with each other.
  • First install the latest firmware updates for your router.
  • Then update the software on your other devices, such as on your Mac and on your iPhone or iPad.
  • On each device that previously joined the network, you might need to forget the network to ensure that the device uses the router’s new settings when rejoining the network.
  • How To Change Router Ip Address

    WiFi Router setup installation Dubai Sharjah **Free Visit**

    Before we explain how to change router IP address, we want to clarify the difference between public and local IP address.

    As the name suggests, a public IP address is the address computers and servers outside your network see when you connect to them. Its also the address you see when you visit a website like What Is My IP?, which is a leader in providing IP address lookup services.

    Your public IP address is assigned to you by your internet service provider, and you typically have no control over it. Some ISPs provide static IP addresses to their customers, but the chances are that you have a dynamic IP address that changes from time to time on its own or after a request.

    Your local IP address, on the other hand, is the address assigned to your router and all other devices behind it, and you can change it as you see fit. This is how to do it on D-Link routers, and routers from other manufacturers wont be much different.

    • Enter your routers IP address into your favorite web browser.

    • Log in with the default username and password.

    • Type in the routers new IP address under Router Settings.

    After youve changed your routers IP address, you will no longer be able to access it using the old address. This is something to remember as it could throw you off the next time you decide to change your routers settings.

    Also Check: How Does A Portable Wifi Hotspot Work

    Setting Up The Modem And Internet Connection

    After you have all the equipment, you’ll need to set up your modem and Internet connection. If your modem wasn’t set up for you by your Internet service provider , follow the instructions that came with your modem to connect it to your PC and the Internet. If you’re using Digital Subscriber Line , connect your modem to a phone jack. If you’re using cable, connect your modem to a cable jack.

    Create A Username And Password

    To configure the router, you’ll need to log in, using its default admin name and password. You can usually find this information printed on the router itself, or in an accompanying user manual.

    Next, enter the required credentials. Once you’re in, you should immediately create a new username and password. The defaults are usually something like “admin” and “password1234,” which are obviously not secureso make sure to change them at the first opportunity.

    Recommended Reading: Airtime Player Southwest

    How To Configure Multi

    Many modern wireless routers can broadcast multiple access points at the same time. Typically, one accessed point is used to connect known devices to the network, and a completely separate access point is created for guests. The main benefit is that you dont need to share your main Wi-Fi password with strangers and hope they wont publish it anywhere.

    To create a guest Wi-Fi with a Netgear router, follow the instructions below. The process should be very similar for routers from other manufacturers.

    • Enter your routers IP address into your favorite web browser.

    • Enter the router user name and password.

    • Select Guest Network.

    • Ensure that the Enable SSID Broadcast check box selected.

    • Give the guest network name.

    • Select a security option.

    • 957 User reviews

    If you want to get more information about Wi-Fi, check out the following articles about Wi-Fi routers, the best apps for wireless networking, WiFi signal, etc.

    Connect Your Gateway To Your New Router

    How to Setup a TP-Link WiFi Router

    Turn off your gateway . If an ethernet cable is plugged into the gateways LAN port, unplug it and plug it into your routers WAN port . If there is no ethernet cable plugged into the gateways LAN port, an ethernet cable should have come with your router. Use it to connect the gateway to your router. Turn your gateway back on and wait a minute or two for it to boot up. Next, plug in your routers power supply and turn it on. Wait another minute or two for it to boot.

    Michael Brown/PCWorld

    Connect your gateway to your routers WAN port using a CAT5e or CAT6 cable . The red cable goes from the router to a PC, while the thinner cable plugged into the green port on the gateway connects to a phone jack in the wall..

    Read Also: How Do I Change My Wifi Password Optimum

    Checking Your Wifi Router Before Setting Up A Wifi Extender

    Theres no point in wasting your time installing a wifi extender if your router is in poor working condition. A good wifi router will operate nicely for a few years, but if you have had the same router for four or five years, its probably time to get a new one. Even if it seems to be working well, a new router will give off a better signal.

    If your router is new and still has a poor signal, make sure you have it setup in a central location. If youre still getting poor coverage or not the range you would like, a wifi extender is the next best step.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox