How To Connect Brother Printer To Wifi

How To Connect Brother Hl 2270dw Printer To Wifi

Connect Brother printer to wifi – wireless tutorial

Connecting brother hl 2270dw printer to wifi is fairly simple. If one has a WLAN access point or router that supports WPS or AOSS, also known as AirStation One- Touch Secure System, then the Brother machine can be easily connected to the wireless network.

To use Wifi Protected Set Up or WPS, one should confirm the whether the WLAN has a WPS access.

  • To configure wireless settings, one should place the Brother machine within range of the WPS or the AOSS access point/ router. The range however, might change, depending on the environment.
  • Next, one has to make sure that the wireless cord is plugged in, and then the machine should be switched on till it is Ready.
  • Next, one should hold down the WPS or AOSS button on your WLAN access pointer or router for a few seconds. The time of holding down the button would depend on the WLAN access point.
  • The wireless setup button then has to be located at the back of the machine and pressed down for less than 2 seconds. A pointy object, like a ball point pen should be used to press the button.
  • Note: It is important to remember that the button should not be pressed down for more than 3 seconds, or it will change to the PIN method of the Wifi Protected Setup Mode.

Additionally, one can proceed to install the printer driver for network connection if that has not been correctly installed. Even if one is printing with the help of a USB connection, one still needs to install the printer driver for network connection.

Restart Your Printer Device And Wi

  • First, turn off both your Printer and Wi-Fi Router.
  • Now restart the devices, i.e., the printer and the router.
  • This is usually done by pressing the power button for 10 seconds.
  • A green light indicates that the devices are turned on and working.
  • Now, go over to the wireless setting and try to reconnect the devices.

Note: Dont forget to save the changes before reconnecting. In case reconnecting does not work, try reaching out to the support team of brother printers. They are very responsive and will help you solve your issue in no time by offering the most suitable solution to your problem.

Wireless Network Terms And Concepts

SSID and channels

SSIDEach wireless network has its own unique network name and it is technically referred to as SSID or ESSID . The SSID is a 32-byte or less value and is assigned to the access point. The wireless network devices you want to associate to the wireless network should match the access point. The access point and wireless network devices regularly send wireless packets which has the SSID information. When your wireless network device receives a beacon, you can identify the wireless network that is close enough for the radio waves to reach your device.
ChannelsWireless networks use channels. Each wireless channel is on a different frequency. There are up to 14 different channels that can be used when using a wireless network. However, in many countries the number of channels available are restricted. For further information, see Ethernet wireless network.

You May Like: Connecting Blink To Wifi

How To Convert Any Usb Printer Into A Wireless Wi

Posted on

Like my tips? to sign up for my free Daily Tech Tips Newsletter and youll never miss one!

Note: The links in this post are affiliate links.

One of the most useful features of many modern printers is their ability to connect to your network via Wi-Fi, eliminating the need to connect a cable between your computers and mobile devices and your printer.

But what if you have a printer that only connects via a USB cable and you really dont want to replace it just to get Wi-Fi connectivity?

The answer lies in a small box called a Wireless Print Server.

Simply place your printer in the place thats most convenient for everyone wholl be using it, then plug it into the wireless print server.

Congrats, your trusty USB-only printer can now be accessed from anywhere in your home or office without running a cable from the computer or mobile device to the printer!

If your printer is old as dirt and giving you problems, youd probably be better off simply replacing it with a new model that has Wi-Fi connectivity built right in. But if you happen to really like your printer and it works great, why replace it?

Simply add a wireless print server to your network and print from your laptop, desktop and mobile devices without having to switch a cable from one device to another.

Amazon has an excellent selection of wireless print servers to choose from, at great prices and free shipping to boot on many of them! to check them out.

Remedies To Fix The Issues

Connect Brother printer to wifi

Remedy 1

Turn off your Brother Printer and turn it on again after a few minutes. This helps to re-establish the connection between your printer and PC.

Remedy 2

You can also use the Network Connection Repair tool to eradicate network connectivity issues. This helps in assigning the right network SSID as well as the Subnet Mask.

Remedy 3

Print the WLAN Report of your printer and verify the status of your printer. If your printer is not connected to the correct network or not connected at all, then you need to connect Brother Printer to wifi once again.

Don’t Miss: Blink Sync Module Troubleshooting

Why Is My Brother Printer Not Connecting To The Internet

Primary Guide to Solve Brother Printer WiFi Connection Problem. First of all power off the Brother printer and router for minimum one minute and then power on it back. Then turn off the Wi-Fi on your Brother printer and then again turn it on. Try to connect your Brother printer to the Wifi using WPS method.

Related Questions And Answers

What is the network key for Brother Printer?

If you are asked to enter the network key for your Brother Printer while you try to connect your Brother Printer to wifi, then you should know that the network key is actually the network password of your router. To find out the network key, check the label of your router.

How to connect brother printer to iPhone?

  • Turn on your printer and connect it to a wireless network.
  • Go to the Settings of your iPhone.
  • Choose the wifi option and turn on its toggle.
  • Choose your printer from the list.
  • Open the document you wish to print and give the print command.
  • Why is the WiFi button flashing on my Brother printer?

    If you see that the wifi button is flashing on your Brother printer, it simply means that your printer is connected to the Wi-Fi network and is ready to print wirelessly. If this light continues to blink and does not stay still, then there is a possibility that the wireless connection is weak and needs to be reconnected.

    How to connect brother printer to google cloud print?

  • At first, connect your Brother Printer to Wi-Fi.
  • Now, open Google Chrome and go to its Settings.
  • Tap on the Show advanced settings link.
  • Choose Google Cloud Print.
  • Now, sign in with your Google account.
  • And choose the blue-colored button saying Add Printer.
  • Follow some prompts to connect your Brother Printer.
  • Also Check: How To Find The Wifi Password On Mac

    How To Get Brother Printer To Print Wirelessly

    Image Source: DT Unboxed Youtube

    Having a label printer gives more efficiency for businesses, but imagine the boost with a Brother wireless label printer, you can print with no hassle and limits for wired connections wherever you go!

    In this post, we will let you through how to get your Brother printers to print wirelessly using WiFi, WiFi Direct, Bluetooth, and USB. This guide will also cover all compatible devices where you can enjoy wireless printing, from your computer, laptop, and even your mobile phone.

    How to Connect my Phone to my Brother Printer via USB?

    Use Wps Option To Connect Wifi Network

    Quick Guide: How To Connect Wireless BROTHER PRINTER to Wi-Fi Network (Model: HL-L2390DW)
    • Check and locate the WPS button/option on your WiFi router.
    • Start with pressing the setup wireless button on your router/modem.
    • The LED above it will start blinking.
    • Move to your printer and press the WPS button on it.
    • Now your printer will go in WiFi setup mode.
    • Wait for confirmation message.
    • Check LED light on the WiFi button on your printer, this indicates the WiFi connection has been set up.

    Don’t Miss: Best Wifi Extenders For Spectrum

    What Is The Ip Address For My Brother Printer

    One of the first things to do when setting up a new printer is getting your IP address. The Brother printer has many different models and each one will have a different IP address.

    If you don’t know what type of Brother you own, scroll down for instructions on how to find out what model it is. After that, follow the instructions below for your specific device.

    Add Your Brother Printer To Windows 10 Pc

    Step 1: Turn on your Brother printer.

    Step 2: Open your Windows 10 PC, hit the Windows key on the keyboard, and click the Settings icon.

    Step 3: On the Settings window, click the Devices option.

    Step 4: Select the Printer & scanners option on the left side and then click the Add a printer or scanner option on the right side.

    Step 5: Find your Brother printer from the list and click the Add device button.

    Step 6: Wait for Windows 10 to install the corresponding driver for your printer.

    Now, you have finished installing Brother printer on your PC and you can print something you want.

    You May Like: Dunkin Donuts Wifi Sign In

    How To Connect Your Brother Mfc 9340cdw To Wifi:

    1. Press WiFi icon.

    This icon should appear on the upper right hand corner of your touch screen. If you have this icon, press it and move to step 6.

    If you dont have this button, skip this step and move on to step 2.

    2. Press Settings icon.

    This is the tool icon on the upper right hand corner of your touch screen.

    3. Click All Settings.

    7. Press Yes when Enable WLAN? is displayed on the touch screen.

    8. Choose Network Name .

    Your machine will display a list of available network names in your area. If your network name is not displaying, check your wireless router/ access point to see if it is turned on and connected. If so, you may need to move your machine closer to the wireless router/ access point.

    9. You now have the following options:

    a. Enter Network Key. Enter the Network Key of your wireless router/access point using the touch screen. Once you have entered your Network Key, press OK and then press Yes to apply the settings. Move to step 10.

    b. No Network Key needed. If your Network Name is not encrypted with a password, you may skip this step and go to step 10.

    c. WPS route. If your wireless router/ access point supports the WPS, press Yes when the machine asks if you would like to WPS. When the machine instructs you to begin WPS, press the WPS button on your wireless router/ access point. Then press Next using the touch screen.

    10. Connect to WiFi.

    What Is Wps Pin Brother Printer

    How to Connect Brother Printer to Wi

    The WPS pin Brother printer is an excellent and versatile machine that can print at a high speed and will not smudge or smear the ink.

    These printers are also designed to be economical, which means they use less ink than other comparable models. If you’re looking for a printer with all these features, then it’s time to get acquainted with the WPS pin Brother printer.

    Don’t Miss: Sony Bravia Tv Wifi

    Reset Your Wifi Connection

    • Go to settings in your printer.
    • Select the Network option.
    • Press 1 to give your consent to Reset the network.
    • Your printer initiates to reset network settings.
    • the printer will reboot automatically.
    • Try to connect the printer to the Wi-fi again.

    IMPORTANT: Make sure your Printer IP is the same as your Router IP. Any conflict in these two wont allow your printer to get connected to the WiFi network.

    How Do I Make My Brother Printer Discoverable

    Configure the wireless settings:

  • Place the Brother machine within range of your WPS or AOSS access point/router.
  • Make sure that the power cord is plugged in.
  • Turn on the machine and wait until the machine is in the Ready state.
  • Hold down the WPS or AOSS button on your WLAN access point/router for a few seconds.
  • Read Also: Can You Have 2 Routers In The Same House

    Use The Wlan In Order To Connect The Brother Printer To Wi

    Well, you might be thinking whether how you will be able to Connect Brother Printer to Wi-Fi. Well, it is not going to take much effort. All you are required to do is to perform simple steps in order to fulfill the task.

    • Make sure that you are examining the base or the side of the access point or the wireless router.
    • After that go through the document thoroughly. You are likely to find the best information that is linked to the network name and the password key on the back of the access point and the wireless router.
    • The next thing that you need to do is to set up the brother printer. For this, you need to locate the power cord and then connect it with the brother printer machine. The next thing that you need to do is to connect it with the electronic socket in order to power it on.
    • Press the menu button on the control panel of the machine.
    • The next thing which you need to do is to choose the network using up and the down keys again.
    • Then press the navigation keys in order to choose the WLAN and then press the OK button.

    This is going to help you connect the brother printer with the Wi-Fi.

    How Do I Get My Printer Out Of Deep Sleep

    How to connect your Brother printer to Wifi

    To get the printer out of sleep mode, you have to click on Start followed by Options. When you do this, the LCD will display the Sleep Mode: On message. Further, you have to choose Off using the UP or DOWN key. To save the settings, you have to click on OK followed by the STOP or EXIT option.

    You May Like: How To Change Your Wifi Password Optimum

    Brother Dcp L2540dw Printer Wireless Setup

  • Turn your router ON and it must be having an active internet connection.
  • Connect your PC to the routers network.
  • On the function panel of the Brother DCP-L2540DW setup printer, tap the Menu button.
  • Utilize the arrow buttons and pick the Network option.
  • Select Setup Wizard > OK.
  • Turn on the WLAN option.
  • Now the printer will search for the router network.
  • Choose the network name of your router and select OK.
  • Type your SSID and network password.
  • Now the printer connects to your computer and prints a WLAN report.
  • Check the Wifi connection status on the report.
  • Thus your Brother DCP-L2540DW printer gets connected to the network of your router and the Brother DCP-L2540DW printer wireless setup is Done.
  • Note: Before Wireless Setup you have to Complete your Basic Brother dcp-l2540dw setup and Brother dcp-l2540dw Driver Installation of this brother printer.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox