How To Connect Hp Laser Printer To Wifi

How To Connect A Printer Via Wireless Network

Setting Up Your HP LaserJet Printer on a Wireless Network in Windows | HP LaserJet | @HPSupport

If you want to connect a wireless printer, the connection process may seem more daunting, but youll be surprised to find how smooth the transition from wired to wireless can be.

Step 1: Locate your settings

  • Once turned on and ready for configuration, youll need to connect the printer to your home WiFi
  • While the steps on installation vary by manufacturer, most modern printers will have an LCD screen that lists the available WiFi networks
  • On this screen, click around and locate the setup page that allows you to adjust the Wireless LAN Settings

Step 2: Link your WiFi network

  • After accessing your LAN settings, youll need to locate your home network service set identifier – better known as your SSID
  • You can find your SSID by hovering your mouse over the WiFi icon located at the bottom right of your taskbar
  • Your SSID is also located on the bottom or side of your internet service providers router

Step 3: Complete connectivity

  • With the SSID selected, youre ready to enter your network password
  • Once entered, your printer is prepped for all printing activity

Step 4: Locate your printer settings

  • Locate the gear icon link to your settings window and click on the icon labeled Devices

Step 5: Connect the printer to the computer

Connecting Laserjet M118 To The Wifi Network

11-26-201904:31 PM

Hi! I have an HP LaserJetPro M118dw and I do not know how to connect it to the network. Second, I have an HP Chromebook and I cannot get it to recognize the new printer. Likely, because the printer is not “available” on the network. HELP!

Welcome to the HP Support Community. I’d be happy to assist you with the connectivity issue.

If the router has a WPS push button, try these steps –

1) Press and hold the Wireless button on the printer for more than three seconds to start WPS push mode. The Wireless light starts blinking.

2) Press the WPS button on your router.


Or, connect the printer to Wi-Fi Direct and run the Wireless setup from the EWS page –

1) Connect the printer using the Wireless Direct. Please refer to page#45 and 46 from the User Manual for steps.

2) Open the browser and in the address or the URL bar type this – to launch the EWS or the printer’s page.

3) Go to the network tab > Wireless and click on the Wireless Setup Wizard.

Once the printer is connected, the Wi-Fi LED on the printer will become solid.

You may also refer to – HP Printers – Printing from a Chromebook

Hope this helps! Keep me posted.

Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.

Click the Kudos, Thumbs Up” on the bottom right to say Thanks for helping!

How To Connect An Hp Printer To Wifi Through The Wireless Setup Wizard

The Wireless Setup Wizard runs from the printers control panel. Follow these steps:

  • Make sure you know your WiFi routers network name and password. If you are unsure, follow the steps outlined above.
  • On the printers display screen, go to the Network menu or touch the wireless icon and go to settings. Select Wireless Setup Wizard and this will display a list of nearby wireless networks.
  • Select your wireless network name from the list. If you cant see it listed, scroll down to the bottom and enter it manually. Make sure you enter the name exactly how it is displayed on your router, taking care to input the correct upper and lowercase characters.
  • Then enter your WiFi router password. Your printer should then connect to your WiFi network.
  • If you are unable to connect after following these steps, your printer will give you the opportunity to print a Wireless Network Test report. This should help you find out what is wrong.

    Don’t Miss: Can I Have Two Wifi Routers In One House

    Obtain The Printer’s Ip Address

    To access the Embedded Web Server , you must have the printer’s IP address. Locate the IP address on the printer control panel using the following steps.

    Example IP address:

    The steps vary according to the type of control panel.

    Touchscreen with white background

    Touchscreen with black background

    2-line LCD with keypad

    Find your printer control-panel type in the options below and then follow the steps to obtain the printer’s IP address.

    Touchscreen control panel with white background

    Follow these instructions for printers that have a touchscreen control panel with a white display background.

    Touchscreen with white background

    From the Home screen on the printer control panel, touch the Wireless icon , or the Ethernet icon , to view the printer’s IP address or host name.

    Touchscreen control panel with black background

    Follow these instructions for printers that have a touchscreen control panel with a black display background.

    Touchscreen with black background

  • From the Home screen on the printer control panel, touch the Connection Information icon .

  • Touch the Network Connected icon , or the Network Wi-Fi On icon , to display the IP address or host name.

  • 2-line LCD control panels

    Follow these instructions for printers that have a 2-line LCD control panel with physical buttons to press:

    2-line LCD with keypad

    How Do I Connect My Hp Deskjet 1000 To Wifi

    How To Connect HP LaserJet Printer to WiFi

    Deskjet 1000 Change from a USB connection to a wireless connection Click Options and Supplies on the details pane, and click the Utility tab. Now select hp 1000 Wireless setup and confirm and allow connecting. Cut off the USB cable from the hp deskjet 1000 wifi setup printer and computer.

    In the same way How do I setup my HP DeskJet 1000 printer?

  • Introduction.
  • Step one: Unpack the printer.
  • Step two: Check the contents of the box.
  • Step three: Connect the power cord and adapter.
  • Step four: Turn on the power.
  • Step five: Select the language and region printer series only)
  • Step six: Load plain paper.
  • Step seven: Install the cartridges.
  • Subsequently, Does HP DeskJet 1000 have scanner? The printers launched after 2010 comprises of the HP Scan software that supports each and every scanning function of a printer. You need to download the HP DeskJet 1000 full feature scan driver under Driver-Product Installation Software to utilize all those scan functions provided by HP.

    How do I reset my HP Deskjet 1000 printer?

    Step one: Reset the printer

    Unplug the power cord from the wall outlet. Wait at least 15 seconds. Plug the power cord back into the wall outlet. Reconnect the power cord to the printer.

  • Once restarted, your printer will have been reset to factory default settings.
  • You May Like: Can You Have Two Different Routers In One House

    Print A Wireless Network Test Report

    Print a Wireless Network Test Report to find information about your printer network connection or to troubleshoot connection issues.

  • Print a Wireless Network Test Report:

  • Inkjet printers with a control panel menu: Open the Wireless, Network Settings, or Setup menu to locate the list of available reports.

  • Most inkjet printers without a control panel menu: Press the Wireless and Information buttons at the same time, or press the Wireless and Start Copy Black buttons at the same time.

  • LaserJet printers: Press and hold the Wireless button for 10 seconds or until the Ready light blinks, or go to the Wireless menu and selectWireless Network Test.

  • Laser NS and Neverstop Laser printers: Press and hold the Resume and Wireless buttons for 3 seconds.

  • DeskJet 6000 and 6400, ENVY 6000 and 6400, and Tango printers: Touch and hold theInformation button until all control panel buttons light up, and then touch the Information and Resume buttons at the same time.

  • Review the information on the report, and then follow any instructions provided to troubleshoot connectivity problems.

  • How Do I Uninstall And Reinstall A Printer

    Then follow these steps to remove and reinstall the printer.

  • Select the Start button, then select Settings > Devices > Printers & scanners.
  • Under Printers & scanners, find the printer, select it, and then select Remove device.
  • After removing your printer, add it back by selecting Add a printer or scanner.
  • Recommended Reading: Find Out Wifi Password On Mac

    How To Connect A Printer To Your Computer

    Connecting your computer to a printer has become easier than ever as we progress into the age of innovative technology, but it seems as though the number, colors, sizes, and complexity of all the wiring can get lost in translation. Even when you think youve got the hang of connecting point A to point B, it takes a lot more than merely plugging in and out to deliver the right results.

    In our digital age, printing comes in two forms – wired and wireless. Well walk you through how to connect a printer to your computer, laptop, or handheld device.

    How To Connect A Printer To Your Handheld Devices

    How To Connect HP LaserJet Printer to WiFi| How To | EJ How To

    It seems as though we are constantly glued to our favorite handheld devices and reliant on them to perform hundreds of everyday tasks. New and ever-improving technology allows those on-the-go to print with the touch of a finger. Need to quickly transform the content on your 6-inch screen into letters and images on an 8½ x 11-inch sheet of paper? We are here to show you how.

    How to connect a printer to your iPhone or iPad

    Engineered specifically for Apple products, AirPrint-enabled printers are the answer to your wireless printing wishes. Without any need to download drivers or install printer-specific software, AirPrint allows you to print computer quality photos and documents from any of your Apple products.

    There are hundreds of wireless printers already manufactured with AirPrint enablement. Check Apple Support to see if your printer is compatible.

    Step 1: Connect to your WiFi network

    • Within your Apple settings, select WiFi to see all available networks
    • For seamless processing, make sure both your iPhone/iPad and printer are connected to the same WiFi network

    Step 2: Locate your printer

    • Open the app on your Apple device that you want to print from
    • Once youve got the right document, tap on the apps share icon
    • Within the list of shareable options, tap the “Print” icon and select your printer

    Step 3: Complete the job

    How to connect a printer to your Android device

    Step 1: Add your printer to Google Cloud Print

    Step 2: Download the Google Cloud Print app to your device

    Recommended Reading: Does Southwest Have Wifi On The Plane

    See If Your Printer Is Hp+ Enabled

    HP outlines all the various ways to set up wireless printing on its website. We spoke to its experts though, and they said that the best and easiest option is via the app. Just choose an HP printer thats HP+ enabled.

    HP+ is currently only available on the following printer models: HP DeskJet 2000, 4000 series, ENVY 6000 series, OfficeJet Pro 8000, 9000 series and HP LaserJet M200 series. If your printer is brand new, its likely to be HP+ enabled. If youre still unsure, check the product code. Every HP+ printer will have a small letter e at the end of the code.

    Our latest printers are equipped to connect wirelessly to your phone, laptop or PC via the HP Smart app. All you need is an internet connection. The app will then guide you through the simple set-up process, says HP.

    How To Connect An Hp Printer To Wifi With Auto Wireless Connect Software

    Alternatively, your printer may have been supplied with Auto Wireless Connect software. This means you can connect your printer to a wireless network automatically without connecting any cables or entering your wireless network settings . Many newer HP printers will have this capability during the standard software installation process.

    To use Auto Wireless Connect, follow these steps:

  • Unpack your printer and plug it into a power source. If its Auto Wireless Connect compatible, this set-up option will be offered during installation. Your printer will then be in Auto Wireless Connect mode.
  • Install the software for your printer. To do this, visit the HP website and select software and drivers, then printers, and then enter your printer model. Follow the instructions until you are prompted for connection type.
  • When prompted, select the Network connection type. Then choose Yes, send my wireless settings to the printer . After that, your printer will do the rest!
  • If your computer or network configuration is not compatible with Auto Wireless Connect, you will be offered an alternative wireless set-up method.

    You May Like: Best Way To Set Up Google Wifi

    How To Connect An Hp Printer To Wifi With Hp+

    Weve focussed on how to get a new HP printer working because its the UKs best-selling home printer brand. But the advice for setting up other brands, such as Canon, Epson and Brother, is very similar.

    Wireless printers offer a huge number of benefits, like the ability to print from wherever you are using your smartphone or tablet. They also avoid the need for a messy series of cables, says an HP spokesperson.

    You can plug your printer directly to your laptop or into your WiFi router . But there really is no need these days. Wireless is reliable and printers with built-in WiFi make it easy to print wirelessly over broadband.

    Image credit: Dominic Blackmore

    Test By Printing Something

    How will you connect HP Laserjet Printer to wifi?

    It really is that simple. You can now print directly from the HP Smart app. But also the printer is on your home WiFi network, so other devices connected to the network should be able to see it too. For example, children should find that it appears as a printer on their devices so you no longer need to be the homework print shop.

    A spokesperson from HP outlines how to print from the app: Tap either the Print Photos or Print Documents tile, depending on the content you would like to print from your device. Its that easy! The HP Smart app also gives users the ability to scan and print physical documents, all from their mobile device.

    You May Like: Delta Sky Club Wifi

    Open The Embedded Web Server And Configure The Wi

    Learn how to open the Embedded Web Server and configure the Wi-Fi Direct settings.

  • Open the Embedded Web Server:

  • On your computer, open a Web browser, and in the address bar, type the IP address or host name exactly as it displayed on the printer control panel.

    Example of an IP address in the browser address bar

  • Press Enter on the computer keyboard.


    If the browser displays a message indicating that accessing the website might not be safe, select the option to continue to the website. Accessing the website will not harm the computer.

    The EWS opens.

  • On the EWS Home page, click the Home tab, and then click Wi-Fi Direct.

  • On the Wi-Fi Direct page, adjust the connection type and change the Wi-Fi Direct printer name, as desired.

  • Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox