Roomba Not Connecting To Wifi: What You Can Do To Fix The Issue
Technological advancements have brought more convenience to every aspect of modern life, including robot vacuums like Roomba. There are many issues that are unique to these smart devices. For instance, a Roomba not connecting to a home Wi-Fi network or to the mobile app is a common problem that many customers have experienced.
It’s always easier to find the problem and fix it on traditional vacuum models. However, for those unfamiliar with robot vacuums, this is not always the case. Follow the instructions below to pair your robot vacuum with the iRobot Home app and troubleshoot when your Roomba is not connected to Wi-Fi.
Roomba vacuums can be connected to a Wi-Fi network
How To Set Up A Roomba With Its Mobile App
Follow these steps to connect your Roomba robot vacuum with the iRobot Home app.
First of all, you need to download and install the Home app on your smartphone or tablet. As long as you have a mobile device with iOS 11 or Android 7.0 and higher, you can go to the app store and search for iRobot Home and install the app.
Place the charging station of your Roomba on a flat surface. Make sure the area is free of any obstacles so it can receive good coverage from your home Wi-Fi router.
A Roomba charging station Via: Amazon
Check your Internet connection with your smartphone/tablet, and make sure you know the wireless network’s name and password.
Plug the charging station in and turn it on. If your Roomba is brand new, remove the battery pull tab and place the Roomba on the charging station. Turn on the robot vacuum. To avoid your Roomba falling, don’t put the charging station on or near stairs or ledges in your home.
Bluetooth is the first source an iRobot vacuum uses to connect to your mobile device. Make sure you have Bluetooth enabled on your phone/tablet. The Home app will scan for this function and ask you to enable it if your device isn’t ready to pair over Bluetooth.
Note: Your device may ask for location permission, which is a regular request when any app needs Bluetooth to do the job. It allows the Home app to detect any Roomba near it.
Once everything is ready, open the app and follow the instructions on the screen.
The iRobot Home app
Connect The Roomba To Wifi
Once you have signed in, select your Roomba. You will be taken through the basic setup steps.
The app will automatically detect your home network and ask you to confirm whether its the one you want to use. Once you confirm, the app will ask for the WiFi name and password.
When you have successfully setup your home network on the app, its time to connect the network to the Roomba itself.
Making sure the robot vacuum is on, press the home and target buttons simultaneously for a couple of seconds. You should hear a tone and see a flashing green network icon. The robot will automatically connect with the app and attempt to join your home network.
The app will tell you when the robot has connected successfully. You can then personalize your robot with a name, language and even birthday.
If you are unable to connect the app or the robot to your WiFi, check your user manual and iRobots website help pages for WiFi connection troubleshooting tips.
You May Like: Google Wifi Number
How To Connect Your Roomba Vacuum Cleaner To Wifi And Control It Remotely
NOTE: This page contains Amazon.com affiliate links that may compensate the owner of this site when you buy a recommended product – but they do not impact the price you pay. Learn More.
If you are thinking of buying a Roomba, you should buy one of the newer Roomba models with WiFi connectivity. You will be able to control the robot and schedule cleaning sessions remotely using the iRobot Home App. You can also connect the vacuum cleaner to smart voice assistants like Amazon Alexa and Google Assistant.
As with most WiFi connected appliances, connecting a Roomba to your home WiFi network can be a pain. So here is a quick guide to help you setup your WiFi-connected Roomba vacuum cleaner and control it from anywhere. For more information, visit iRobots help page on WiFi connectivity and remote control.
How Do I Reset The Irobot Roomba Login Password
You must reset the login password if you have created an iRobot account and do not remember the password. Launch the Roomba app and enter your email address in the box labelled Forgot your password. Your email address will be used to send a password reset request. Enter a new login password by clicking the link. Once reset, you need to perform the iRobot Roomba i7 wifi setup again.
Read Also: How To Change Wifi Name And Password Optimum
Does The Irobot Roomba Work Without Wifi
So, you just purchased the iRobot Roomba and youre ready to start living a stress free life without ever touching a broom or controlling a vacuum. Your new device is all set but you either dont have WiFi or you have reservations about connecting your Wifi to a home device.
The iRobot Roomba can function without WiFi but it will not function optimally. Features such as customized cleaning settings and voice command functions can not be accessed offline.
It is quite sad losing these functions isnt it? Well keep reading in order to find out how to achieve maximum function on your iRobot Roomba, even offline.
How Do I Reconnect My Roomba Wi
Read Also: Blink Sync Module Solid Blue Light Only
Roomba Not Connecting To Wifi Here How To Fix
iRobot offers different models of Roomba vacuums, but the models with Wi-Fi connectivity are definitely the most convenient ones. You will be able to control your Roomba vacuums and schedule the cleaning sessions from your phone through the iRobot app. You can connect your Roomba to Amazon Alexa and Google assistant. Though not all Roomba can be connected to wifi stuck.
Connecting your Roomba to Wi-Fi can be a little tricky for some users. If you are facing the Roomba is connecting to wifi stuck issue, we can help you fix it. In this how-to connect Roomba to wifi guide, you can learn about steps to connecting the Wi-Fi enabled Roomba and to control it from anywhere. We are also going to provide some steps to troubleshootRoomba not connecting to wifi issues.
Connected With An Existing Wi
You have your module configured with the SSID and Key of your Wi-fi Network. If this network has Internet access you will see the images contained in the Roomba Wifi Remotes embedded web server. When you are configuring the network parameters you can configure your Roomba Wi-fi Remote with DHCP to provide automatically an IP address, Gateway and DNS servers from your inalambric router.
In this case the Led is blinking every three seconds.
You May Like: Does Southwest Offer Wifi
What Should I Do With Your Roomba Not Connecting To Wi
An error screen
When Roomba won’t connect to Wi-Fi, and the iRobot Home app says it cant connect to your vacuum.:
- Ensure that your Roomba and its charging station are set up in an area with good Wi-Fi coverage.
- Make sure that the lights on your Roomba are blinking before you pair it using the mobile app.
- Follow the above instructions again.
If you still have an issue with your iRobot not being connected with your Wi-Fi:
- Reboot your Roomba, then retry the setup process above.
- Force close the mobile app, then retry the setup process above.
- Check if your home Wi-Fi is working properly and complies with your Roomba’s requirements.
Reboot Your Roomba Robot Vacuum
The clock of your Roomba may revert back to its factory setting once the machine is rebooted. However, don’t worry about the cleaning schedule it will remain intact.
Follow the reset procedure for your Roomba series as shown below:
- Roomba s and I series: Find the Clean button on your robot vacuum. Press and hold it for about 20 seconds, then release it. The light ring on top of the machine will turn white and swirl clockwise. This means that your machine is in the process of rebooting itself. It may take more than one minute for the reboot to complete, after which the light ring will turn off.
- Roomba 700, 800, and 900 series: Press and hold the Clean button for about 10 seconds, then release it. Your Roomba will play a tone, indicating that it is rebooting. You can learn more about this in our iRobot Roomba 960 reviews.
When your robot vacuum has rebooted and turned on again, retry the pairing process as described in the first section.
Press and hold the Clean button to reboot your Roomba
Recommended Reading: Where Is The Reset Button On Blink Mini Camera
Check If Device Is Powered On
This might sound obvious and silly but some owners could forget to power on the device since some of these energy-saving appliancesTrusted SourceThe cost of convenience: robot vacuums require more energy than you think | Yale Environment ReviewPast generations predicted that the 21st century would be filled with exciting technologies. Self-driving cars, door locks managed by smartphones, and automated household appliances fulfill their futuristic vision.environment-review.yale.edu do not have clear signs that they are switched on.
Confirm that the home base is connected to a power outlet, the robot vacuum is sitting on the home base and the Roomba lights are working. If they are not, press the Clean button and then try to reconnect the device to resolve Roomba wont connect to Wi-Fi issues.
Is There A Robot Vacuum That Does Not Need Wi
There are multiple robot vacuums that do not need Wi-Fi to run. You simply press the clean button, and they clean any clutter they detect. The tried and tested 600 series of the iRobot Roomba are great Robot devices that work without Wi-Fi and dont have the option of Wi-Fi either.
Heres a list of robot vacuums that do not need Wi-Fi to work!
Read Also: Use 2 Wireless Routers
How Does A Roomba Vacuum Irobot Clean Floors In Three Stages
The 3-Step Cleaning System with Edge-Sweeping Brush is intended to loosen, lift, and suction dirt and debris from all types of floors.
The Edge-Sweeping Brush is designed to capture dirt, dust, and debris from corners and edges at a 27-degree angle.
Dual Anti-Rotating brushes work together to gather dirt, dust, and debris from your floors and remove them.
The strong, sturdy motor of the robot suctions dirt into a filtered dust container. The high-efficiency filter captures 99 percent of dust, and allergens as small as 10 microns in size.
How Do I Reconnect My Roomba To Wi
In the event that your Roomba becomes unpaired from your network, or you’re setting your vac up for the first time, getting the bot connected is a quick and easy process.
Step 1: Ensure your mobile device is connected to whatever network your Roomba supports. You’ll also want to make sure you’ve enabled Bluetooth on your device.
Step 2: Verify the Roomba is on its charge dock. Then, launch the iRobot companion app from your mobile device.
Step 3: If this is the first time you’re adding the Roomba to your Wi-Fi network, choose Add Robot. Then, choose a name for your vacuum and press Continue.
Step 4: Enter the password for your Wi-Fi network and press Continue. From here, your Roomba should automatically pair to your network.
Step 5: If you’ve experienced a network outage or some kind of intermittent trouble with your Wi-Fi, or simply want to change the network that your Roomba lives in, launch the iRobot app and head into Network settings.
Find the network you want the vac to connect to, enter the password, and wait for your Roomba to connect.
Also Check: Password For Optimum Wifi
Can I Use A Roomba Without Wi
Not all Roomba models can connect to Wi-Fi, but that does not mean that they cannot do what they were designed to do.
A Roomba doesnt need a Wi-Fi connection to do its job. All you need to do is hit the Clean button and your Roomba will start cleaning.
The Wi-Fi connection feature, however, does offer convenience. Using Roombas iRobot Home app, you can schedule cleanings and customize your Roomba from your smartphone. You can even receive mapping reports on your phone.
These are clear advantages of why having a Roomba with a Wi-Fi connection can be ideal.
Check Requirements For Your Roomba Model
As we stated earlier, older Roomba 600 series models are not compatible with 5Ghz, unlike the latest Roomba i7, i8 and S9 which connect to Wi-Fi networks with 2.4GhZ as well as 5GhZ frequencies. Braava jet m6 which is one of the best robot mops is also compatible with both 2.4GhZ and 5GhZ network configurations.
You might also consider changing your routers security settings from WPA3 to WPA2 or WPA3 Transitional if your iRobot app is not connecting to the network.
Don’t Miss: Tirza Wilbon White
Why Is My Roomba Not Connecting To Wi
When booting up your Roomba for the first time, you’ll be prompted to pair the new robot vac to a compatible Wi-Fi network. While this process should take no time at all — as the bot will typically connect to the Wi-Fi network your phone is tethered to — there are times when the process may not be so direct.
Here are some common hiccups you may run into and what you can do to get past them.
Step 1: First thing’s first: Ensure your Wi-Fi network is operating correctly.
Sometimes we take this troubleshooting step for granted because we’re so used to all of our web-connected gear being operational. In some cases, even if your Wi-Fi is actually working, it may not be running at peak performance, making it difficult to connect and register new devices.
If you notice your network is a bit slower than normal, or you can’t get your new robot vac online, a simple fix is to reboot your router. We recommend unplugging, waiting for about 15 seconds, and then re-powering the router.
Once your network returns, try and reconnect your Roomba again.
Step 2:Ensuring that your Roomba is connected to the correct wireless network band is a must.
These days, most wireless routers will broadcast both 2.4GHz and 5GHz frequencies. Traditionally, 2.4GHz is best for operating equipment that is farther away from your router’s home base, while 5GHz is recommended for connecting equipment that is closer in proximity to your router.
That’s many models — not all models.