How Secure Is Wi
The WiFi protocol is the most sought after entry-point that cybercriminals use to infiltrate to get access to your online communications, activities, and data. If your WiFi password is easy to guess, its also easier for them to get in. Most startlingly, hackers manage to do this without putting a single step inside your home. Weak WiFi protocols and authentication methods will likely make it very easy for any threat actor to get into your entire home network without them being physically there.
As technology progresses, our dependency on reliable, secure Wi-Fi wireless networks via a router or any device increases. A secure Wi-Fi connection works by encrypting your internet activities with AES 256-bit encryption. If you add a VPN network on top of your WiFi connection, you are assured complete security and privacy, as data is transmitted via a secure tunnel, thereby keeping you safe.
How Can Purevpn Benefit You
There are a plethora of benefits coming from PureVPN, but most importantly, you get a secure browsing experience. PureVPN provides exceptional online security so that your real identity and your data are secured against trackers, marketing agencies, cybercriminals, and surveillance groups.
All users can connect to any Wi-Fi with complete confidence and peace of mind
How To Secure Your Wi
To revist this article, visit My Profile, then View saved stories.
Your router is perhaps the most important gadget in your home. It checks all incoming and outgoing traffic, acting as a sentry to make sure that nothing dangerous comes in and nothing sensitive goes out. It controls access to your home Wi-Fi network and through that all of your phones, tablets, laptops, and more. If someone else gains access to that networkwhether a remote hacker or your next-door neighborit can be quick work to compromise those devices.
With that in mind, it’s essential to keep your router secure. The good news is these steps aren’t too difficult or time-consuming, and they’ll significantly reduce your risk.
These tips will require you to access your router’s settings, which you can typically do through your web browser by typing in an IP address, or if you’re lucky, through an app on your phone. If you’re not sure how to find these settings, check the documentation that came with the router, or run a quick web search using your router’s make and model.
You should be using WPA2 security to guard access to your router, which essentially requires every new device to submit a password to connect. This is enabled by default on just about every router, but if it’s not active on your device, switch it on through your router settings.
Read Also: Wifi On Delta
Which Is The Best Method To Secure Wifi Network
MAC address filterand Network encryptionmethods are best to secure WiFi network. You can also use software to Know Who is Connected To Your WiFi. With MAC Filtering, it is not an easy to hack your WiFi. So, you can use these methods to secure your WiFi.
So, these are the best methods to secure your wifi network. You can choose these methods to secure your wifi network. Write in the comments to let us know which method you are using.
What Are Wifi Security Threats At Home
You mightve heard stories of hackers snooping on people in public spaces, where common WiFi is freely accessible without any password. In that case, hackers are able to intercept a lot of your data and not only read your emails but also see your credit card information and login credentials.
Theres a widespread notion that your wireless security at home is somehow different and better protected. But its really not. Unless youve taken some precise steps to improve your WiFi protection strategy, your WiFi router guard is just as much of an open invitation for intruders as your local coffee shop.
Home wireless network security is an issue because most people never take the time to change the default settings, come up with complex passwords, check for encryption, filter random devices, and use a virtual private network . Good news is its not that difficult to set up wireless networks correctly. Heres a quick guide to show you how.
Recommended Reading: Blink Camera Reset Button
How To Set Up An Encrypted Wifi Network Connection
The next procedure explains how to set up secure communications between asystem and a router in the home. Many wireless and wired routers forthe home have an encryption feature that can generate a secure key.
Before You Begin
If you are connecting to your own home’s wireless network, make sure thatyou have configured your router and have generated the WEP key. Follow therouter manufacturer’s documentation for generating and saving the key configuration.
Open a terminal window on the system and type the following:
# dladm create-secobj -c wepkeyname
where keyname represents the name you want to give to the key.
The create-secobj subcommand then runs a script that requests the value for thekey.
provide value for keyname: 5-or-13-byte keyconfirm value for keyname: Retype key
This value is the key that was generated by the router. Thescript accepts either a 5byte or 13byte string, in ASCII or in hexadecimal forthe key value.
# dladm show-secobjOBJECT CLASSkeyname wep
where keyname is the name for the secure object.
# dladm connect-wifi -enetwork -k keyname interface
Example 5-3 Setting Up Encrypted WiFi Communications
This example assumes that you have already done the following:
Create a secure object.
How Do I Check Whether My Network Is Secure
Home Wi-Fi networks are typically created and accessed through a physical device called a broadband router also known as a hub or wireless router. You will need to connect to your router to check its security settings. The most important of these settings are the administrator password, the wireless security key and encryption method. There are a number of ways to check what these settings are, including:
Don’t Miss: Where To Place Blink Sync Module
Second Step Check The Firmware
Wi-Fi routers, like almost all hardware devices, have software built into them that control how it functions. Because its software written to hardware, and not easily modified, we call it firmware. From time to time the device manufacturer might release an updated version of the firmware for your device. These updates may contain new functionality or security fixes.
Your device might check for new firmware automatically, but many devices will require you to manually check for it. That might be done through the administration console of your device, or you might have to go to the manufacturers website and check there for new firmware to download.
As long as youre in the administration console or app, check to make sure the firmware is up-to-date. Try to check it periodically perhaps every month or so.
Disable Remote Access To Protect Your Network From Intruders
Many routers come with features designed to make remote access from outside your home more straightforward. However, unless you need admin-level access to your router from somewhere else, you can usually safely turn these features off from the router settings panel. If you have remote access disabled, you reduce the risk of people remotely accessing your router and tampering with it.
To do this, open your router’s web interface and look for the “Remote Access,” “Remote Administration,” or “Remote Management” feature. Ensure it’s disabled often, it is disabled by default on many routers, but it’s worth checking.
If it turns out that some of the apps and devices on your network rely on remote access, you can always enable the feature again if you need to.
You May Like: Wifi Passwords Mac
Change Your Router Administrator Login
To set up your wireless router, you usually need to access an online platform or site, where you can make several changes to your network settings. You can usually access this by entering your routers IP address into your web browser.
If you have a new router, you can find its IP address listed on the manufacturers website or in the product manual you were provided with upon purchase. However, if your device is rather old, you can still discover its IP by following this handy guide.
These basic steps will teach you how to easily connect to your home network as an admin. Usually, the address bar type looks like http://192.168.1.1 or http://192.168.0.1.
Most Wi-fi routers come with default credentials such as admin and password which are easy for malicious hackers to break into. Therefore, you need to access the routers settings and change them to unique credentials that cannot be guessed so easily.
My recommendation is to create a username that isnt personal to you in any way and pair it with a strong password that contains both uppercase and lowercase letters, as well as alphanumeric characters.
How To Forget Acsecure Wireless Network
How to forget ACSecure on a Windows 10 device
How to remove WiFi credentials from Mac OS
If you cannot connect to ACSecure :
- Try forgetting the network before trying to connect again
- Try rebooting the device.
Read Also: Blink Module Reset Button
Nine: Install A Firewall
Installing a firewall can assist you in defending your network against any external threats. A firewall will block any malicious traffic from setting foot into your secure network and will notify you when any potentially dangerous activity begins to occur. When it is appropriately configured and set up, it can also act as a barrier for any internal threats, preventing any of your files from leaving your computer.
Most, if not all wireless routers, seem to come along with a configurable network firewall that is built-in and has access controls and denial-of-service defenses. It should be noted that sometimes, the firewall may be toggled off by default upon purchase. Make sure that your firewall is on and that you have selected all options and settings to best suit you and your needs. Many firewalls are also available for purchase online. Be sure to choose one that again will work best for your needs.
Hide Your Network Name
Wi-Fi access points are usually configured by default to broadcast the name of your wireless network – known as the service set identifier, or SSID – to make it easy to find and connect to. But the SSID can be also be set to “hidden” so that you have to know the name of the network before you can connect to it.
Given that employees should know the name of your company Wi-Fi network , it makes no sense to broadcast it so that anyone else who happens to be passing by can easily find it too.
It’s important to note that hiding your SSID should never be the only measure you take to secure your Wi-Fi network, because hackers using Wi-Fi scanning tools like airodump-ng can still detect your network and its SSID even when it is set to “hidden.”
But security is all about providing multiple layers of protection, and by hiding your SSID you may avoid attracting the attention of opportunistic hackers, so it is a simple measure that is worth taking.
Recommended Reading: Can You Have 2 Routers In The Same House
Install Antivirus Software And Anti
Always run antivirus software and anti-malware apps on your devices. Internet security software protects your computer and mobile devices from becoming infected by malicious software that hackers can use to access your Wi-Fi network from inside.
For more information about Internet security software, in particular antivirus software and malware protection, read my article here.
Turn Off The Wps Setting
The WPS, or Wi-Fi protected setup, is the function that lets devices like phones and smart home gadgets pair with your network. This setting is convenient, especially if you have a lot of smart devices to connect, but it leaves an opening for a hacker to get in. Look for the WPS button on your router and turn it off unless youre actively pairing your devices with the network.
Don’t Miss: Does Dunkin Donuts Have Free Wifi
Using A Qr Code On Wps To Access Wifi Without A Password
If youd like to access someones WPS Wi-Fi network or let them use yours without using passwords, you can always use QR codes instead. Bear in mind that the QR code method is a bit involved and requires some technical knowledge. Honestly, it would be easier to write the password down and give it to your guests, but this is a better solution for some people. Here are the basic steps to sharing someones Wi-Fi using QR code scanning.
Alternatively, you can download a third-party app and convert the QR code into an NFC tag. Heres how to do it with the WiFiKeyShare app on Android.
Rename Routers And Networks
All wireless routers come with a generic username, and many also include a generic password. When you set up the router for the first time, youll need to use this generic admin information, but after its up and running you should change both. The generic usernames and passwords that come with routers are public record, which makes a hackers job easyespecially if you skip changing the routers factory settings.
After changing the username and password for your wireless router, you should change the name of your home Wi-Fi network. This is called the SSID , and its the name that people will see if they are scanning for nearby networks. Default network names often include the brand and model number of the router being used to create the network, which gives hackers valuable information about your Wi-Fi setup.
Avoid tipping off hackers by renaming the network. Be warned that any devices currently connected to your Wi-Fi network will be kicked off after the name change, including smartphones, computers, game systems, smart home devices, etc. Youll have to update and reconnect all of those devices when you rename the network.
“All wireless routers have a setting that allows you to hide the wireless network SSID from being broadcast. If a hacker cannot see it to even know that it exists, they wont try to hack into it. Your devices can connect to it, and you can add new devices to it because you know the SSID they do not.”
Read Also: How To Reset Blink Camera