How To Connect Tp Link Wifi Extender

How To Use The Tp

TP-LINK: How to install a Range Extender

As I said in the article above, the routers these days have the feature of using them as a Range Extender.

There are different modes available in the dashboard area of the router, and it is pretty easy to select the model you want.

This is exactly what we are going to do with my TP-link router.

Login to the dashboard of your TP-LINK router The IP address for login into the TP-Link router is

When you are on the login page, you can type admin in both the ID and password fields .

Note: If you had changed the login password, you can reset the router so that it comes back to default, after that you can use admin in both user id and password field.

Once you are inside the dashboard of the TP-link router, you will find a few options in the left-hand side.

The third option would be operation mode, clicking on which will give you options you want to use your TP link wireless router.

Select the last one which is Range Extender, and follow the instructions.

On the next page, it will show you all the Wi-Fi networks available in your area.

You need to select the one you are using in your home or office, and then enter its password, just like you would do on any device when connecting to your Wi-Fi network.

Once it is done, the TP-link router would reboot once to change the Operational mode.

Ok, that you can plug it into a convenient location where your DeadZone could be eradicated.

How To Setup Tp Link Wifi Extender With Wps Button

This button is found on the back of your router, labeled as WPS. You can complete the setup process by using this button too. Follow the steps written below to setup:

1. Power on your device first.

2. Then, press the power button on the router to get it into active mode.

3. Now, press & hold the WPS button on the router.

4. As soon as you press the button, immediately hit the WiFi button present on the extender. Now, check if the LED light is glowing on the extender.

5. In case it shows connection failure, it means the wireless signal is off.

6. If the wireless signal is visible, then it means that the connection is established.

Now, the TP Link Wifi Extender setup without ethernet cable process is complete. Therefore, you can now place the extender in your desired location.

How To Update Firmware Of ‘tp Link Wifi Extender’

To Update the TP Link Extender firmare, follow these steps :

  • Begin with launching any web browser.
  • Type this url and hit Enter. Now, web based settings page will open.
  • Here, click on the System Tools option from the menu.
  • Next, select Firmware Upgrade from the Drop-Down menu.
  • Then, under the online upgrade option, click on the Check for upgrade option.
  • This will display new firmware version if its available. Click upgrade to begin the update process.
  • Now, wait for 2 minutes for the update process to complete. Once its completed, the range extender will restart automatically.
  • Your range extender is now up to date.

Choose your TP Link wifi extender model Here

Don’t Miss: Does Dunkin Donuts Have Free Wifi

How To Setup Tp

Setting up the TP-Link Extender with/without WPS is a really easy process but it does take some time and consideration. So before doing any of the technical stuff, you need to find a place where you want your extender to be.

1. Placement

Placing your Wifi Extender is really simple, but you need to be careful. That is because, in any scenario, the extender signal will be blocked by walls, or get interfered by other waves. So you need to plan carefully about the place you want your extender to be. The simplest way you can do so is by figuring out where exactly you need it.

First, take out your house layout and mark a place you want your signal to be. Now mark the place where the router is located. Now take your extender and place it somewhere in the middle of both places. Also, try to place it into an open area for better range.

2. Setup

Before you start setting up your TP-Link Extender, you must know a few things.

  • IP Address
  • SSID
  • Password

If you dont know about any of it then, open Command Prompt and type in ipconfig/all. Here you will all the required information. Now, type in that IP address in your browser and log in to your router. If you are still unable to log in, contact your Internet service provider for support.

Now, it is time to set your Tp-Link Extender. Basically there are two ways of doing that. But it also depends on your TP-Link Extender. If your Extender has a WPS button follow the second method and if it does not then follow the first one.

How Do I Connect My Tp

  • The first step is to access the Google Home App.
  • To add your content, tap Add.
  • Then select Set up device..
  • Tap Have something already been set up?
  • The last step to finding Kasa is to click on the Search icon in Step 5.
  • To Authorize KASA sign in, then click on Authorize under your personal account under the KASA icon.
  • Also Check: Troubleshooting Blink Sync Module

    Why Do We Need A Tp

    When you get an internet/Wifi connection, your internet provider installs a router that connects all of your devices with the internet. So the router basically works as a hub that provides secure internet throughout your home via ethernet and wifi. Now the ethernet is basically a wire that ensures maximum speed with zero obstacles. But the wifi, on the other hand, is a signal.

    As we all know, signals are basically waves and waves propagates through different mediums. So by theory, they should be able to connect to a wide range of devices. But waves carry energy, and that energy degrades as we farther we move from the source. Which is why we have an effective range. It is actually the amount of distance a wave or signal can maintain that energy.

    And the effective range of a typical wifi network with 2.4 GHz bandwidth is 300 feet. In simple words, if you put a router in the middle of a field you should get a strong wifi signal in a radius of 300 feet. But inside your house, you have walls, doors, furniture, etc. and they absorb waves which drastically reduces their energy by half. This is why your wifi speed varies within your own house.

    So in order to solve this issue, TP-Link Extender is needed. It basically amplifies your Wifi connection to the same bandwidth it was before. Which ultimately increases its range and you get strong Wifi connection throughout the house.

    How To Configure My Range Extender Via Web Gui To Extend An Existing Wireless Networks Coverage

    This Article Applies to:

    Note: This FAQ is suitable for all single band RE products of TP-Link, and here we just take TL-WA850RE as an example.

    We have made clear introductions in the QIG of TL-WA850RE that how to configure TL-WA850RE via WPS. Here well introduce how to configure TL-WA850RE to extend an existing wireless networks coverage via Web GUI.

    Before we configure TL-WA850RE, please check the hardware connection:

  • Plug your TL-WA850RE into a power outlet near your wireless router or AP.
  • Use an Ethernet cable to connect your TL-WA850RE to your PC.
  • Note:

    We strongly suggest you should configure your TL-WA850RE via wired connection. But if you dont have any PC, or your RE product like TL-WA854RE doesnt have any Ethernet port, in this situation you can only configure TL-WA850RE/TL-WA854RE via Wi-Fi.

    Now lets begin configuring TL-WA850RE:

    1. Log into the Range extender by typing or in the address bar of the web browser . A little window will pop out and ask you for the username and password. The Username and Password are both admin in lower case by default.

    Follow the Quick Setup, and click Next to continue.

    2. Select your Region here, and then click Next.

    3. Now your TL-WA850RE will scan all the wireless networks around.

    Then please choose the wireless network you want to extend, click Next.

    4.Now input the password of the wireless network you want to extend, and clickNext.


    Is this faq useful?

    Don’t Miss: Blink Sync Module Solid Blue Light Only

    Problems Connecting Tp Link Extender

    Just bought a TP-LINK Wireless WiFi range extender? Having connection problems with it? Well youre not alone. It appears that these WiFi repeaters are causing a lot of people a lot of headaches . and its not just TP-LINK . if you take some time to Google the problem youll find that the majority of WiFi repeaters are difficult to set-up and connect. This page has been created to share our experience with the TP-LINK TL-WA850RE although the advice may very well work with other models.

    DISCLAIMER: this advice is given in good faith and you will use it at your own risk. We are not technical boffins so if you blow up your computer in the process youve only got yourself to blame.

    So heres the thing. You may have found that the WPS function on the TP-LINK repeater doesnt work. This isnt uncommon. Our main wireless router has always connected faultlessly via WPS with other devices but it seems that the TP-LINK TL-WA850RE does not connect with WPS very happily.

    GOOD NEWS EVERYONE! we found a solution to this!

    Once you have made your wireless connection to the TP-LINK signal extender dont type in the address bar instead type which hopefully will open up the admin panel so that you can finally connect your existing wireless router with your new TP-LINK repeater.

    Thanks also to Ron who sent us this supporting information:

    Range Extender Setup Help

    How To Setup TP-Link Wifi Extender


    This article provides configuration assistance and troubleshooting guides for initial setup of the range extender.

    If you problem is not included, contact our Technical Support with the product model and problem details.

    Before setup

    Q1. Can the range extender work with a non-TP-Link router?

    • Yes. The range extender works with almost any Wi-Fi router. But it may not be compatible with routers or gateways with firmware that has been altered, or is non-standard or outdated.

    Q2. I have two range extenders, how can I connect them to my home network?

    • Generally we suggest connecting all the extenders to the router for better performance. You can also connect one extender to another extender which already gets connected to your router, however we dont recommend adding more than two extenders to one single link chain in consideration of the Wi-Fi quality.

    Q3. How do I log into the range extender?

    • Method 1: Via the Tether app
  • Connect your smartphone to the range extenders Wi-Fi.
  • Launch the app and tap your extender to log in. The Tether App and web page will use the same login password for your range extender.
    • Method 2: Via the web management page
  • Connect your smartphone to the range extenders Wi-Fi.
  • Launch a web browser and visit .
  • Create a password to log in. The Tether App and web page will use the same login password for your range extender.
  • Q4. What should I do if the Tether app cant find my range extender?

    Access the internet

    You May Like: Does Westjet Have Wifi

    Netgear Wifi Mesh Range Extender Ex7300

    Youre going to want to match two values between the router you have and the extender you want to buy: the Wi-Fi generation, and the Wi-Fi speed. The generation will generally be either Wi-Fi 5 or Wi-Fi 6 . The speed is expressed as a function of that connection: if the extender is marked as AC750, that means its using 802.11ac at up to 750 megabits per second. If it says AX1800, its using 802.11ax at up to 1800 megabits .

    You can buy an extender thats newer and/or faster than your router, and it will work fine. But youll be paying for something that you dont really need, since the extender wont be able to speed up the connection from the router itself.

    Type Of Extenders From Tp

    The basic job of a link Extender is to amplify a wifi signal. But just like we have different cars for different jobs even though they are all just transports, we also have different Extenders.

    Wifi Extender

    A wifi Extender is a device that amplifies your Wifi signal by using backhaul. It is a technique that carries a signal from one site to another physically. Using which a backhaul signal is transferred to and fro ensuring no interference or energy loss. Through this technique, a Wifi Extender is able to extend the range and strength of the signal while working as a clone.

    WiFi Repeater

    As the name sounds, A Wifi Repeater basically repeats or clones your routers signal. It is a small device with a wireless antenna that connects to your router and then rebroadcasts its signal. But unlike an Extender where the signal was just amplified, the Repeater clones it. Meaning that any available device in the local area will connect to the Repeater instead of Router.

    As cool as it might sound, it also works against it. Since the repeater, broadcasts the signal it receives, it cant amplify the signal. So if the repeater receives a 2Mbps signal it will broadcast 2mbps even though the routers signal is 5mbps. Other than that, the Repeater is also just another router so it faces the same disadvantages aswell.

    Don’t Miss: Optimum How To Change Wifi Password

    Re505x Design And Features

    The RE505X looks identical to the RE603X. In fact, youd have to check the model number on the back of the device to tell the difference. At 4.9 by 2.9 by 1.8 inches , it’s slightly shorter than the Netgear EAX15, that is, until you flip up its two external antennas, which brings the total height to 8.2 inches. The extender has a two-prong plug on the back that’s positioned near the bottom of the enclosure so as not to block access to the second outlet of a two-outlet receptacle.

    Four LED status indicators are positioned on the front of the extender. The power LED glows blue when the power is on and blinks green during startup. The signal LED is solid blue when the extender has a good connection to the router, glows solid red when the connection is weak, and is dark when there is no connection. The other two LEDs show 2.4GHz and 5GHz Wi-Fi connectivity. The left side of the extender holds a gigabit LAN port and the right side contains reset and WPS buttons.

    How Range Extenders Work

    TP Link 150Mbps Universal WiFi Range Extender TL

    Wireless network extenders work by receiving and rebroadcasting WiFi signals from your wireless router in order to boost signal in areas that may have been physically blocked before hand. There are two basic types of extenders: antenna based extenders, which basically just add another broadcasting node to your network, and power-line based extenders, which use your homes electrical system as a wired network to transmit wireless signals across obstacles.

    For example. take a look at this typical house plan. The router is located in the living room. Areas of a strong signal, good signal, weak signal, and no signal are indicated on the plan

    In this example, there is a good signal in most of the house, but in the bedrooms on the left side of the plan, there is an only a weak signal or no signal at all. This problem could be resolved by moving the router to a more central location, but that might not be convenient or possible. However, you could place a wireless extender in the hallway leading from the living room to the bedrooms. That would change the signal map to look something like this:

    Also Check: How To Setup Internet On Sony Bravia Tv

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox