How To Extend Wifi Range With Another Router

Even Better Install A Wifi Mesh System

How to extend your WiFi range with another router

Recognizing the challenge of delivering seamless WiFi coverage to the typical home, NETGEAR designed a solution that eliminated the pitfalls of the previous methods. The result is the Nighthawk Mesh Extender system, which provides seamless, broadened WiFi range without the login disruptions, bandwidth issues, or the setup complexities characterized by installing traditional extenders and additional routers.

The Nighthawk Mesh Extender system is unique in several key areas. First, it has a backhaul radio with a dedicated connection to your router that is not shared by your connected devices. Not only can the router and mesh system communicate directly with one another, but the 2.4 GHz and 5 GHz bands are available for devices to transmit data at the highest speeds possible. This division of labor is a total game changer in range extension.

Another difference is that the Nighthawk Mesh Extender system shares the same network name and security credentials of the existing router. You can therefore walk around your home, and your device will seamlessly connect to the strongest WiFi signal, whether delivered by the router or by the Nighthawk Mesh Extender.Because there is only one network name with one password, you wont experience any disconnects.Your WiFi connection works as seamlessly as you would expect it to.

Connect Your Routers In Wireless Bridge Mode

If using an Ethernet cable between the two routers isnt possible, then you can also use a wireless bridge connection between the two routers.

However, first consider the option of purchasing a powerline Ethernet adapter kit. This turns your homes copper power wiring into Ethernet transmission cable and you can use this to connect the old router as an access point. Of course, powerline adapters are much more expensive than Ethernet, but could still be cheaper than buying a whole router or a WiFi extender.

If a wireless connection is the only route forward, then check the documentation for your older router and look for a wireless bridge, extender or repeater mode. Again, router manufacturers play fast and loose with the names for this feature.

Two routers can have the same name for a feature, but only one actually works as a way to extend another router. Alternatively, they can have two different names for the same function. The only way to be sure is either to try each option or consult the manual for a description of the feature in question.

The correct option will include a section where you can choose the SSID of the primary router and enter its password. Some routers might ask for the MAC address of the primary router or other more technical info. It varies and, most importantly, this type of wireless extension functionality isnt that common. If the old router is a budget model, it may not have the ability at all.

Extending Wifi For Free

Here are some methods that may extend the WiFi range and coverage of your network without spending a dime.

Move your router

Simply finding a new location for your wireless router can have a dramatic impact on your WiFi signal for a variety of reasons. You should strive for a central location that is free from physical obstructions like walls and doors if possible. Dont keep your router in a closet or a desk drawer if you hope to realize its true potential signals range.

Try to place it as high as possible, with a line of sight to all devices that will be connected to it. While this is not always totally feasible, getting as close as you can to this goal will help you extend the range of your WiFi router.

Analyze your WiFi network

When you use a WiFi analyzer such as NetSpot you can survey your own network as well as other networks whose signals may overlap with yours. It is a fact of life when dealing with wireless networks that their signals can cause issues with other, nearby WiFi installations. You may be able to determine that you are competing for the same channel with your neighbors router. Changing your router to make use of a different channel can extend your WiFi signal and improve performance throughout the network.

Update your routers firmwareSwitch router frequencies

Don’t Miss: Connecting Roku Stick To Wifi Without Remote

Change Your Wifi Channel

Just like walkie-talkies, all WiFi routers broadcast on a certain channel. In the 2.4 GHz band, there are 11 channels, and the 5 GHz band has 45 channels. That may seem like plenty of channels to choose from, but the reality is different. Only channels 1, 6, and 11 are spaced far enough from one another to not overlap. The remaining channels can be used, but they are more likely to experience interference resulting in slowdowns, particularly in heavy use.

Thats why you should sign in to your routers administrator interface and set it to use one of the three non-overlapping channels. Which one? The one thats used the least by other WiFi networks in your area.

How Can I Extend My Wifi Signal To Another Building

How to extend wifi range with another router

In this article we are going to look at how you can extend your wifi signal to another building in the most effective way possible. There is no quick fix and there is no shortcut because there are so many things to consider in this topic. But i have laid out some important points and keeping it as short as possible so you can easily walk though each on of them.

Firstly the options you have vary based on the type of environment youre in, the type of equipment youre using and the results that you want to achieve.

So i have listed some situations below, some dos and donts, so you can make an educated decision when it comes to extending your WiFi signal.

Read Also: Does Dunkin Donuts Have Free Wifi

Choosing Your Wifi Extender Brands And Model

Without digging deeper into the brands or best models of Wifi Extenders, as this guide is not intended as a comprehensive Wifi extender buying guide, we will simply suggest you purchasing the same branded Wifi Extender as your router. For example, if you have a netgear router, buy a netgear wifi extender. And use a motorola wifi extender if you have a motorola router.

The reason behind this simple recommendation is that although WiFi is a standardized technology, different manufacturers can still design or code things a little differently. Some manufacturers implement minor differences or features to boost their performances and may use different technological wording or terms.

These small differences can cause unforeseen errors or problems that are hard to diagnose down the road. Compatibility is the number one consideration when picking out your ideal wifi extender. Save yourself potential hassle by simply going for the same brand setup. This way you only have to deal with 1 set of terms or even customer support rather than having to cross reference and research.

So if you are renting a modem/router combination from a Cable Company such as Comcast, Time Warner or At& ts U-verse. Simply check the brand of that router, and opt to purchase the same branded wifi extendesr.

Choose Cable When Possible

It may seem counter intuitive after all, you are extending your wireless network but using cable to connect two buildings is always the most reliable method in terms of speed and latency.

Despite its reliability, cable also has its limitations. Regular Cat 5 or Cat 6 cable can only be run for about 328 feet, plus you have to use the right materials and make sure its properly installed, so that it doesnt erode or sever. Optical fiber cable can be run for much longer distances, but these types of installations can be very expensive and involve obtaining digging permits and otherwise dealing with complex city regulations.

Also Check: Connect Canon Mx492 Printer To Wifi

Find A Compatible Router

If you have an old router sitting around, check with the manual to make sure the device can be converted into an extender or a repeater, and get specific instructions. If the router doesn’t support running as a repeater or an extender using the manufacturer’s firmware, there’s another way. See if the router can use open-source firmware . If so, chances are that you can indeed use your old router as an extender.

Be careful with routers from the 802.11b and g eras they won’t work well, because they have a lower maximum bandwidth, which creates bottlenecks in your network. Do the math: If you have a 100-Mbps connection and the extender is limited to a peak of 11 or 54 Mbps, you’ll likely be wasting most of your bandwidth with an older router. Only an 802.11n or ac router will do.

Finally, Asus AiMesh routers can link together to create a mesh network on their own. There are 17 Asus routers that support the AiMesh tool and can automatically create a mesh network topology to fill a home with wireless data. You will need to load new firmware to make it work, though.

MORE: How to Set Up Your Wi-Fi Extender for the Best Signal

How To Extend Wifi Range With Another Router

How to extend wifi range with another router

If our general recommendations didnt help extend the range of your WiFi, its time for a more drastic solution: extending WiFi range with another router.

Before you purchase another router and set it up, we highly recommend you check your WiFi coverage using NetSpot so that you have reliable data that you can use to determine whether the change you made produced a desirable result.

You May Like: How To Change My Optimum Wifi Password

Guidance As Clear As Your Future Wifi Connection

To recap: just like any other technology, WiFi and other networking equipment provides peak efficiency and reliability in peak conditions. The type of equipment you use matters and the way you set-it-up is just as important.

Follow the eight tips listed above to design the network of your dreams and extend your WiFi range inside, outside and across your living or work space.

Solution #: Add A Powerline Network Adapter

Powerline network adapters are another option to add internet access and WiFi in your garage.

These adapters use your homes electrical circuit to transmit your internet signal. Theyre easy to install heres how they work:

  • Plug one adapter into a power socket close to your router.
  • Connect that adapter to your router with an ethernet cable.
  • Plug a second adapter into an outlet in your garage.
  • Run an ethernet cable from the adapter to your computer or a smart device with an ethernet connection.
  • Hardwiring a particular device in your garage or throughout your home isnt always practical, so you could also pair the second adapter with another router to give you a usable WiFi signal.

    Note that factors like the quality and age of your homes electrical wiring, the distance a second powerline adapter is from the main router, and interference from other electronics can all affect your signal quality.

    Also Check: Connect To Canon Mx492

    How To Connect Any Outbuilding To Any Wifi System

    The o2Surf Connection system allows you to Scan, Select and Link any building in range to your existing WiFi Router or Access Point. Our powerful Wireless Client/Router unit, can link any outbuilding to your home Router in minutes!

    What you need to correctly link any outbuilding to your WiFi network, is a powerful Wireless Client device, with a high power antenna thats strong enough to extend your outbuilding to your home Router, or any router or access point for that matter. At that point, you will have an excellent connection to your home router or source of internet, but then another device to rebroadcast, or, Repeat or a localized Access Point is needed inside of that building. Thats where RadioLabs new o2Surf WiFi Connection System comes into play. This kit, has every single device needed inside the kit, to be able to permanently Tether or link the remote building, to your home WiFi router!

    Use 24ghz Instead Of 5ghz Wi

    How to extend WiFi range with another router wirelessly ...

    Wi-Fi can use one of two frequency bands: 2.4GHz or 5GHz. Many people think the latter is better because it offers faster speeds.

    However, this comes at a price: range. The higher the frequency, the shorter the wavelength. And 5GHz signals cannot penetrate walls, ceilings, desks, and, yes, people as well as 2.4GHz signals. (Incidentally, this is why 5G is promising such fast speeds, because it uses much higher frequencies – called millimetre wave – but these signals have a tough time getting through glass, trees and even rain.

    2.4GHz, on the other hand is better at delivering a signal over a greater distance, at slower speeds. That’s why you might be able to get better range from your router by forcing your phone or laptop to connect to your router’s 2.4GHz network. Many routers combine the two frequencies into one network name. That’s done for convenience, but it means you can’t choose which network to connect to.

    If your router is like this, log in to the settings web page and look for a Wi-Fi menu where you can split the two frequencies into two separate network names.

    It’s worth bearing in mind that 2.4GHz devices face a battle because lots of other things also use this frequency including microwaves, baby monitors, Bluetooth and more.

    So your mileage may vary, but it is well worth understanding the difference between Wi-Fi bands, as you can use these to your advantage.

    Don’t Miss: Do Southwest Flights Have Wifi

    How To Turn An Old Router Into A Wi

    ByBrian Nadel12 March 2021

    Kill Wi-Fi dead zones and recycle an old router with a DIY wireless network extender to get whole-house Wi-Fi.

    Unless you’re in a small house or apartment, chances are there’s a corner of your home that your standalone router doesn’t quite reach. Whether it manifests as spotty Wi-Fi or just an irritatingly slow connection, you can do something about it besides complain about your disrupted Netflix session. By turning an old router into a Wi-Fi extender, you can grab the Wi-Fi data signal out of thin air and retransmit it to other parts of the house.

    It’s easy to reconfigure an old router into an extender so that the device grabs a strong Wi-Fi signal and sends out a fresh stream of data to previously unconnected areas. While it costs next to nothing to do this, don’t expect Wi-Fi miracles. Still, it’s a good way to inexpensively fill your home with wireless data.

    We transformed a dusty Netgear R7000 802.11ac router into a repeater as an example of how to do this trick. Using Netgear Genie, a free network-management app for Netgear routers, we easily converted the old router into a Wi-Fi extender to add Wi-Fi to a guest room in my basement.

    The general process for other routers is similar but not exactly the same. If you don’t have one or something similar , you can get a used one for about $20 online.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox