How To Fix Weak Security On Wifi

Updating Security Settings Through Virgin Media Wifi Boosters

How To Fix Weak Security On Wifi & Why it’s URGENT!

If you are using a Virgin Media WIFI booster instead of their Hub 3 and getting the same weak security error, you can update security protocols on your WIFI booster as well. Do the following steps to apply the fix.

  • Use an ethernet cable to connect your laptop to your Booster.
  • Type in on your web browser to log in to the Booster using the password printed on the device.
  • After logging in, Go to Wireless settings> Security.
  • For both 2.4 GHz and 5 GHz, select WPA2-PSK.
  • Go to your iPhone WIFI settings and verify that you dont see the weak security message.

Is This A Problem With My Device

No. This method of data transmission is configured on your router. It seems odd to think that even relatively new routers from UK IPs are being sent out with such old methods configured, but the reason may hark back to what I said earlier about the Nintendo DS. The older the security method you have configured, the more likely it is that all your online devices will be supported ISPs are looking to support as many products as possible, so using older security, such as WPA2-PSK, makes sense. To them.

Of course, now that Apple have made this change, theyre beginning to receive support calls about it. Virgin Media, BT and TalkTalk are just 3 of the ISPs I checked, and all are seeing customers reporting this problem. For example, the Virgin Media Hub 3, released just 3 years ago will need correcting, despite the WPA2-AES standard being around since 2004. And, in some cases, its not just routers Virgin Medias Powerline Boosters are also affected.

How To Fix Virgin Media Weak Security Error

To fix the weak security error on your iPhone while using Virgin Media Hub 3 WIFI, you need to change the security settings. Most of the time, this error is due to your WIFI network itself and not your iPhone.

The WIFI router needs to be changed. The security protocol that Virgin Media used is probably WPA. WPA is an old security protocol that has been cracked a long time ago. Therefore, you need to go to WPA2. We are going to show you how to do it and to update your Hub 3 as well.

Recommended Reading: How To Use Your Roku Tv Without Remote

Switch Your Security Settings

The weak security warning on your iPhone results from the security of your router or access point. Therefore, you need to have access to a router to get rid of this warning.

The general steps of getting rid of the “weak security” include:

  • Use a browser to log in to your router by providing the IP address or the hostname.
  • Locate the Security Settings of the router.
  • Finally, switch the protocols to WPA2 orWPA3 and the encryption type to AES and save the changes.
  • You should select the WPA2 only and not the combined WPA/WPA2 option.

    To change the Wi-Fi security for specific routers, follow the guidelines below.

    1.On Hitron CGNM-2250

  • Using a browser such as Google Chrome, type the IP address and search.
  • On the login page that will appear, enter the information below:Username: cusadminPassword: it can be presented as: “passphrase, S/N, pre-shared key or password.” The password is printed in white on the top or side of the modem, and it is case-sensitive, meaning you will have to type it exactly as it is presented.
  • Shift the settings from “Auth Mode” to “WPA2-PSK,” and the encrypt mode as “AES” and save the changes.
  • Repeat the steps for 2.4GHz and 5GHz networks.
  • 2.Cisco DPC3848V

  • Using a browser such as Google Chrome, type the IP address and search.
  • Shift the settings from “Security Mode” to “WPA2-Personal,” and the encrypt mode as “AES” and save the changes.
  • Repeat the steps for 2.4GHz and 5GHz networks.
  • 3.Arris SBG6782

    4.Cisco DPC3825

    What If The Problem Persists


    If youve carefully followed all the steps illustrated above, resolved the issue in your router configuration settings, and switched protocols on both Wi-Fi bands, and still, the Weak Security alert is appearing under your Wi-Fi name, there is one more thing you can try.

  • Start by opening the Wi-Fi settings on your iPhone.
  • Next, click on Network.
  • Then click on Forget This Network.
  • Finally, reconnect to your WiFi network from scratch by entering your password.
  • Don’t Miss: Southwest Airlines Airtime App

    Solution #3 Set The Security Mode On Your Router To Wpa2

    If you know how to configure your router settings, you can edit the security mode to WPA2.

    • First, navigate to your router configuration page. On any browser, enter your IP address to open the page.
    • Login to your router settings.
    • Go to the Wireless section of the page. The setting may vary depending on the router model and brand that you are using.
    • Look for the Security Mode option.
    • Select WPA2-Personal.
    • In some cases, you need to select WPA/WPA2 first and choose WPA2. If you have the WPA3/WPA2-Personal option, you can set it as well.
    • Save or Apply the changes on your router and retry connecting it on your iPhone or iPad.

    Why Is This Happening

    The Wi-Fi Network symbol on the iPhone is displayed with an error message that states they have Weak Security.

    You are receiving this message because your Wi-Fi encryption settings arent as strong as youd like. If you dont have WPA2 or WPA3 set as your network security settings, you are receiving this message.

    Read Also: How To Mirror Iphone To Roku Tv Without Internet

    Contact Your Internet Service Provider

    If you have a hard time with reconfiguring your routers settings, you may have to contact your ISP. Complications with your router can be a result of many things, and often times you may not be able to fix it by yourself.

    Updating your routers security measure doesnt always work, especially if your router is old and outdated. Furthermore, its inevitable for old technology to become obsolete. With this, you may have to order a new router for your home.

    Most ISPs should provide a new one free of charge, especially if its an issue about having an outdated router. However, you can also look for third-party routers, since those give great benefits as well.

    Feel free to proceed through this independently and with your own research. That about wraps up this article. Hopefully, we helped you fix Weak Security WiFi on iOS 14. If you have any questions or clarifications, feel free to leave us a comment down below.

    If this guide helped you, please share it.

    Updating Your Virgin Media Hub 3

    Weak Security On iPhone? Here’s The Fix!

    Most of the time, the above-mentioned method fixes the weak security error. However, if you still see the error, you can try updating your Virgin Media Hub 3 router. To do this:

    • Tap on the Virgin Media Connect app on your iPhone
    • Youll see an Update button once you are inside the app
    • Tap on Update to update the router software
    • The router will reboot during the process so expect your internet to go down for 3 to 5 minutes
    • Wait for the internet to come back up
    • Now head back to the Settings, tap on WIFI and verify that the weak security error is gone.
    • If the error is still there after the update, you need to once again change the settings of 2.4 GHz and 5 GHz from WPA to WPA2.
    • Restart your iPhone, go to the Settings> WIFI and verify that the weak security message is not visible anymore

    Don’t Miss: Can I Have Two Wifi Routers In My House

    What Does Weak Security Mean On Wifi

    WiFi uses different security standards to protect the computers that get connected to the network. The security of WiFi gets determined by various regularly updated protocols to address issues in the earlier version. WEP is the eldest and, consequently, the most vulnerable of all the protocols. WPA is slightly more secure than WEP. WPA2 follows it, and then WPA3 can be described as the highest standard in WiFi security.

    However, this isnt a significant difference, particularly for an individual homeowner. Additionally, certain older routers do not support WPA3. The majority of us are more about the speed of data transmissions and the range of a router when it comes to wireless connectivity at home, but its time to alter our perceptions.

    Why Is Weak Security Wifi A Problem

    If you see the Weak Security message on your iPhone or iPad it means that iOS isnt capable of using WPA2 or WPA3 encryption to connect to the Wi-Fi network, so this makes it more susceptible to attacks. Weak security wireless networks are more vulnerable than standard home Wi-Fi routers due to Apples design.

    If you are using Virgin Media WiFi then the process is very similar to other providers. Follow these steps:

    Step 1

    Browse to from your phone or computer when connected to your WiFi

    Step 2

    Log in with your administrator name and password. You can find this on the underside of your router, provided that you havent changed anything.

    Step 3

    After you have logged in, navigate to Advanced settings > Wireless

    > Security

    Step 5

    Also Check: How To Reset A Blink Camera

    How To Fix Weak Wi

    Don’t let people pry on your network and steal your data. Fix your Wi-Fi security right now!

    Learning what constitutes weak Wi-Fi security and how to fix it can help you prevent cyberattacks while using Wi-Fi.

    Public Wi-Fi is a good example. Open Wi-Fi may be free but comes at a huge cost, as an open public Wi-Fi network will transmit all your information, including passwords, in plain text without encryption.

    Weak Wi-Fi security is an open invitation to cybercriminals who can exploit this loophole to steal your data. So, in this article, you’ll learn how to fix weak Wi-Fi security with encryption.

    Fix Weak Security Wifi On Iphone Getting Started


    Have you gotten a weak Wi-Fi security caution on your iPhone? The good news is that youre not alone.

    Since updating their iPhones to iOS 14, many people claim theyve gotten a caution on their iPhones, saying that their WiFi network has weak security.

    This text which usually appears under the name of your Wi-Fi network, states that WPA & WPA2 TKIP is not considered a safe protocol and that you need to reset your access point .

    Its a bit confusing, so what should you do?

    For starters, no need to panic. Its true Apple is informing you that some aspects of the Wi-Fi network that your iPhone is connected to arent secure.

    However, the in-depth meaning is that your Wi-Fi network security is not as good as the latest standard.

    It doesnt necessarily mean that a hacker has accessed your network and compromised your iPhone and any other connected devices.

    Don’t Miss: Blink Sync Module Reset Button

    Iphone Weak Security Wi

      Have you received a weak Wi-Fi security warning on your iPhone since upgrading to iOS 14? You are not alone, heres what it means and how to fix it.

      Have you received a weak Wi-Fi security warning on your iPhone since upgrading to iOS 14? You are … not alone, heres what it means and how to fix it.

      Since upgrading to iOS 14, many users are reporting seeing a warning on their iPhone that says their Wi-Fi has weak security.

      The message, which appears under the Wi-Fi network name on your iPhone, states that WPA/WPA2 TKIP is not considered secure and you need to reconfigure your router. Confusing, huh. So what should you do?

      Firstly, there is no need to panic. Yes, Apple is telling you that the Wi-Fi network youre using to connect your iPhone isnt secure. But specifically it means that your connection is not as robust as the latest up to date standardit doesnt mean a hacker is inside your router and has compromised your iPhone and other devices.

      How Do I Get Rid Of This Message

      This will depend on your model of router. If its an ISP provided one, youll need to get in touch with them about it. If its not, youll need to turn to the instructions that came with your router, or to the manufacturers website. But, in a nutshell, you need to make sure youre using either WPA2 along with AES, or WPA3 .

      If you dont like tinkering around with settings, then youre not going to like what you have to do. Why do it then? As the explanation above suggests this will improve the quality of your Wi-Fi security. In some cases, you may even increase your WiFi speed as well.

      Here are instructions for correcting some of the most popular ISP routers

      Also Check: How To Connect Roku Stick To Wifi Without Remote

      Change Wifi Security On Hitron Cgnm

    • Open an Internet browser and locate the address bar.
    • In the address bar, type in the following: and press the enter key on your keyboard.
    • You will be presented with your WiFi modem login page.
    • Enter the following information:
    • Username: cusadmin
    • Password: This information is located on the white sticker on the top or side of your modem. The password may be referred to as the: Passphrase, S/N, Pre-Shared Key, or Password
    • Select the Login button.
    • Change Auth Mode to WPA2-PSK and ensure Encrypt Mode is set to AES
    • Click Save Changes
    • Repeat for both 2.4GHz & 5GHz networks
    • S To Fix Weak Security Warnings

      Fix “Weak Security” Wi-Fi Warning on iPhone iOS14

      Its crucial to ensure that your network is secure because weak wireless networks are at risk nowadays. For example, the security warning that is not as strong on your iPhone is due to the security issues of the access point.

      The only way to correct this issue is to modify your routers settings to use the safest standard available. Continue reading, and well walk you through the steps you can follow to fix weak security WiFi to make sure that your router and, in turn, all devices connected to the internet are secure.

      Read Also: Best Wifi Extender Spectrum

      Make Sure The Current Wi

      The first step to fixing a Wi-Fi security weakness is to find out exactly what type of encryption standard your Wi-Fi device is using.

      You can see what type of encryption your Wi-Fi network is using using your Android device, iPhone, and computer, among other devices.

      Here’s how to view the encryption standard using your Android phone. Note that the steps may differ slightly depending on the brand of your phone.

      With a Redmi phone, go to Settings, scroll down and tap Wi-Fi , and click Available networks If your network is not displayed in the list, then click the arrow next to the icon in front of the selected network.

      You should now be able to view the current Wi-Fi security encryption standard.

      Run The Network Troubleshooter

      The network troubleshooter can help fix a weak Wi-Fi signal.

    • Open the Settings app.
    • Go to the Update and Security group of settings.
    • Select the Troubleshoot tab.
    • Select and run the Network Adapter troubleshooter.
    • Apply any changes that it recommends.
    • You should also try running the Internet Connections troubleshooter.
    • You May Like: How To Add Google Nest Wifi Point

      Popular Articles

      Related Stories

      Stay on op - Ge the daily news in your inbox