How To Get Wifi All Over The House

Ask A Friend To Share An Internet

Best Way to Get Internet Anywhere In Your House

If you need access to the network from your phone, but you do not have unlimited data, you can ask your friends to share the unlimited WiFi Internet from their phones so that you can use it. It can be easily done, no matter if they have Android or iOS. Usually, they just click Turn on hotspot and you can connect to Wi-Fi.

How To Set Up Your Home Wi

So you just signed up for internet service and want to ditch the wires? The good news is that setting up a wireless Wi-Fi connection should only take about ten minutes. All you need is a modem , a wireless router and an active internet connection. Your internet provider should give you instructions to follow on setup, but you can also follow these steps to configure any wireless network:

  • Find a good location for your router. Where you put your router has a huge impact on your Wi-Fi speeds, and once you set it up you probably wont want to relocate it again. Find an elevated spot in a central location in your home, and away from concrete or brick walls, microwaves or other electronic equipment .
  • Connect the router to the modem with an Ethernet cable. This will go in the WAN port on the back of your router and the Ethernet port on your modem. You can skip this step if youre using a combination modem/router device. Youll also need to plug the router in to a power outlet at this point.
  • Configure your Wi-Fi router. This can usually be done in a couple different ways. Most new wireless routers provide a quick-start guide with their own app, which helps simplify the process. You can also use the routers dedicated configuration page to complete setup, which is a URL listed in the routers documentation.
  • And Yes Nighthawk Mesh Works With Any Router

    The Nighthawk Mesh Extender is designed to work with any WiFi router, from the most basic ISP-provided equipment to the latest state-of-the-art WiFi routers of any brand or manufacturer. If your goal is whole-home WiFi coverage using your existing router configuration, then installing the Nighthawk Mesh Extender system will deliver the highest level of performance available. Furthermore, should you ever choose to upgrade your WiFi router, Nighthawk Mesh will grow with you. Adding it will broaden WiFi coverage in even the largest of homes, and it does so without the complexities and inconveniences of the range extension solutions before it.

    Read Also: Can You Have Two Wifi Routers In One House

    How Does The Era Of The Home Impact Your Internet Signal

    You dont need to take a sledgehammer to your walls to find out whats inside of them. Contacting your realtor or a previous homeowner is a good idea, but you can also estimate which materials were used based on the era in which your home was built.Homes from the Antebellum and Victorian Eras may not include many metal components unless theyve been retrofitted with them. But during and after the Edwardian Era, you can expect more homes to be outfitted with wiring and other metal mesh products.

    Common Wifi Roadblocks & How To Fix Them

    How to Boost Your WiFi Signal Strength Using These Simple Steps

    WiFi is electromagnetic radiation, just like light, says Bhaskar Krishnamachari, a professor of electrical and computer engineering and computer science at the University of Southern California. There are objects that block it and others that let it through. Here are some common obstacles to think about as you place routers and use connected devices. In this diagram, weve arranged a three-piece mesh router network to help eliminate potential dead spots in a multilevel home.

    For the best results, place the hub in the center of your home and between the satellites , says CR’s Fisco. Note that satellite 3 sits on the kitchen counter away from the refrigerator . The WiFi signal from both the hub and satellites can also reach up and down to other floor levels, eliminating potential dead zones.

    The Walls Thicker walls tend to absorb more of a WiFi signal than thinner walls, Krishnamachari says. While you cant easily change how thick your walls are, simply repositioning a mesh satellite closer to a rooms entrance may help boost the signal.

    The Fridge A refrigerator and other appliances that contain a lot of metal can cause trouble, too. WiFi signals may bounce off them instead of passing through to the other side. Metal plumbing and rebar in your walls create similar problems.

    The Fish Tank Water absorbs radiation, Krishnamachari says. So your WiFi signal is likely to get hung up near pools, tubs, and, yes, that 100-gallon fish tank you installed.

    Don’t Miss: How To Connect Blink Camera To Wifi

    Changing Wifi Info On All Devices At Once

    When thinking about the disadvantages of smart homes, I remembered a time when my internet router broke. I changed this, and so I had to manually re-configure 5 smart home devices along with a couple of TVs, my printer, two tablets, two Kindles, three mobile phones and two laptops. Ugh changing 17 devices manually is a complete pain!

    Whats more, I then changed my ISP a few months later, which came with a new router: meaning that I had to change all my passwords all over again. Double ugh! This got me wondering whether there was a way of avoiding this pain, and changing the WiFi info on all your smart home devices automatically?

    An internet router often allows you to change the SSID the WiFi name. By changing this to your old routers details, your devices should re-connect without complaining.

    Is It Better To Buy Your Own Equipment

    Some wireless internet providers, including CenturyLink, Verizon and Xfinity, give you the option to use your own products and save the monthly equipment fees. Buying your own equipment not only saves you money, but it can also get you access to the highest quality Wi-Fi equipment on the market.

    If you rent your equipment through your ISP, you likely wont get the most advanced Wi-Fi technology. Verizon and Spectrums gateways, for example, only go up to 802.11ac standards. In contrast, many of the newer models available are on Wi-Fi 6 and Wi-Fi 6e technology. This technology can offer faster speeds and more bandwidth than Wi-Fi 5.

    The only downside to buying instead of renting your equipment is that you will not have access to the same quality tech support as you would when renting your router with your Wi-Fi company. If you would rather use your own equipment, click on your provider below to view a list of compatible modems and routers.

    Don’t Miss: Free Wifi Dunkin Donuts

    Buy A Wifi Repeater/ Booster/ Extender

    Even though they are referred to by many names, WiFi boosters, repeaters, and extenders are basically the same thing.

    WiFi repeaters are relatively simple devices that take an existing signal from your WiFi router and rebroadcast it as a new network. This new network is just an extension of your main network, and all data that go through it also go through the main network.

    WiFi boosters and extenders are very similar, but they also amplify the existing signal before rebroadcasting it to create a second network. Because WiFi boosters typically have greater range than WiFi repeaters, they make sense in situations where the original signal is very weak.

    A good repeater or booster costs less than $100, and it can be installed in a few minutes by anyone since the installation process usually involves only the press of the WPS button. You can find a list of the top 5 WiFi boosters at the end of this article.

    To achieve the best performance when using a WiFi repeater or booster, its a good idea to use a WiFi booster app to analyze existing WiFi coverage and determine the optimal way how to extend the existing WiFi network.

    Update Your Security To Cut Off Bandwidth Leeches

    How To Get Free WiFi In Airports From All Over The World

    Extra users slow your internet connection by taking up internet bandwidth. Failure to add protection to your Wi-Fi network means opening up your network to freeloaders. Thats why Wired recommends all homeowners protect access to their routers with a complex password and WPA2 security.

    Keeping your home Wi-Fi network safe from intruders is doubly important if your home is automated. Every connected device uses bandwidth, and the more outside devices that use your network, the less likely your automated home devices will get the bandwidth they need. Plus, failure to keep your network secure might provide strangers with a bit too much control over your coffee maker, air conditioner or automated security system.

    You May Like: How Do I Change My Wifi Password Optimum

    Mesh Of Access Points

    If youre willing to invest the time and money, and have wired Ethernet throughout your home or office, then a mesh-like solution of APs is the way to go. Mesh solutions can be administered from a single location, and provide the best options for optimum channel management to avoid interference between units. Until recently, mesh AP solutions were expensive, and a bit tricky to administer because they have traditionally been marketed to larger enterprises. Now though, tech-savvy users can get excellent price-performance from products like Ubiqutis Unifi wired Access Points.

    Unifi Access Points come in a range of prices and performance levels, and can be powered over their Ethernet connection . Unifi offers a powerful, centralized, management console, but it requires a little effort to understand how to use it properly if youre not an experienced network administrator. The units do a great job of managing radio channels and handing off clients between each other something that most of us have had to do manually until now. My only gripe is that they dont offer any additional LAN ports, so if you need both to connect both wired and wireless devices in a particular location youll need to add a small hub.

    Ethernet To Wireless Access Point

    This is by far the best option available to increasewireless speed and range in a home. Instead of relying on powerlines to carrythe signal to the wireless repeater or WAP, it uses actual Ethernet cable. Mostnew homes are already wired with Ethernet, but if you own an older home,chances are that you will need to run some cable. If you do need to purchaseand run Ethernet, we recommend buying from Blue Jeans Cable because they individuallytest every cable sold. We dont know of any other cable company withquality control practices as high as BJC. If you are looking for a potentiallyeven less expensive cable, though not as high of quality, check your local homeimprovement store for bulk cable.

    This solution doesnt mean that you need to stringEthernet all over your home. It might just mean that you need a single run ofwire from the router to the location you want to place the WAP. Before actuallydrilling holes and stringing wire, place the WAP in the intended location tosee if you get the extra coverage you need. It doesnt need to be connected tothe internet just to test signal strength. You may find that a short 20 or 25foot run is enough to get the WAP where it needs to be.

    Once you have determined the best location for theWAP, you need to decide what type you want to use. There are three generaloptions that work well in residential environments, A) Apple Airport in bridgemode, B) generic WAP, C) router converted to WAP.

    You May Like: Where Is The Reset Button On Blink Camera

    Whats In Your Homes Walls And Why Its Disrupting Your Wifi Signal

    Certain types of materials used in the construction of older homes are particularly non-conducive to WiFi signals. While many homeowners know that there will be issues with buying homes built in the 1800s, not everyone is aware of the effects that building materials have on WiFi signals.For example, according to the United States Department of Agriculture, the National Board of Fire Underwriters led a campaign in the 1900s and 1910s that encouraged development of new materials and products treated or made with asphalt, metal, gypsum, plastic and asbestos. In the 1920s and 1930s, New products included batt insulation , advanced plastics, perforated acoustical tiles, and Plexiglas.Unfortunately, many of these types of materials have had the added effect of disrupting WiFi signals. If you dont know what materials were used to build your home, reach out to the previous homeowners or the realtor who sold you the home to learn more.Here are some of the most common materials found in an older home that disrupt WiFi signals and why.

    Complete Guide To Extending Your Wifi Network


    The bottom line: before you buy any new hardware, make sure your current router is positioned in the center of the home and not obstructed by walls or furniture. For the average consumer, mesh extenders like Eero and Plume are the easiest way to extend WiFi in a large home.

    Put another way: WiFi is a fundamental part of everyday life.

    It is frustrating when your connection doesnt work as well as it should. Ideally, Wi-Fi setup should be set it and forget it. But all too often, customers are left struggling with that one dead zone in the upstairs bedroom.

    There are many reasons why you may be experiencing less-than-stellar wireless performance in your home . But before you jump to conclusions, its worthwhile to ask yourself whether you need to extend your network in the first place:

    Recommended Reading: Airtime Player App Southwest

    Purchase A Newer High

    The biggest issue holding back your homes Wi-Fi connection may be your aging router. Thankfully, there are numerous advantages to purchasing a brand new router, so youd be investing in more than faster internet speeds.

    A new router could also give you improved home security features and be compatible with a wider spectrum of devices. Additional security and compatibility help homeowners interested in automating their home or making their network more secure.

    Channel Hopping: Avoiding Interference

    Wireless routers broadcast data on a specific channel. In reality, however, data overlaps five adjacent channels. Lots of devices in close proximity, all using the same channels on the 20MHz spectrum, can cause interference.

    With only a dozen channels available, options for switching are limited . A 40MHz network has channels that are twice as wide but occupy a huge chunk of the spectrum on a 2.4GHz network, and so don’t really solve the problem.

    A 5GHz network uses channels much further along the spectrum, well away from the channels used on 2.4GHz, and so by putting those devices that support 5GHz at that end of the spectrum, you keep the 2.4GHz channels free for those devices that need them.

    Also Check: Spectrum Wireless Extender

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox