How To Get Wifi To Work Better

If Your Devices Are Connected To The Slower 24ghz Frequency Band You Can Probably Boost Your Performance Quite A Bit By Switching To The 5ghz Band Dave Johnson/business Insider Reposition Your Router

How To Make Your WiFi Better For Gaming/Daily use

If your router passed the speed test but your Wi-Fi is sluggish or drops out a lot, it might just be positioned poorly. Wi-Fi signals have trouble penetrating solid materials, and certain things stop the signal cold like brick walls, metal appliances and large volumes of water, like fish tanks. In general, the best place to put your Wi-Fi router is in a central location, so it has the best chance of reaching the extremities of your home. But if you mostly need it in one part of the house and you’re having Wi-Fi trouble, consider moving it closer to where the internet action is. You might also need a mesh router or a Wi-Fi repeater, which we’ll talk about later.

Channel Hopping: Avoiding Interference

Wireless routers broadcast data on a specific channel. In reality, however, data overlaps five adjacent channels. Lots of devices in close proximity, all using the same channels on the 20MHz spectrum, can cause interference.

With only a dozen channels available, options for switching are limited . A 40MHz network has channels that are twice as wide but occupy a huge chunk of the spectrum on a 2.4GHz network, and so don’t really solve the problem.

A 5GHz network uses channels much further along the spectrum, well away from the channels used on 2.4GHz, and so by putting those devices that support 5GHz at that end of the spectrum, you keep the 2.4GHz channels free for those devices that need them.

Update Your Routers Firmware

Your router is a small computer dedicated to network management and traffic routing. Like any computing device, it requires an operating systemin this case, firmware. Since no software is entirely perfect, developers release updates that optimize the code, stomp out pesky bugs, and fill security gaps.

Keeping the firmware current is a major priority for performance and security. Many newer routers have automatic firmware updates, but checking the firmware version can give you better peace of mind. Log in to your router and verify that automatic updates are toggled on. If not, update your routers firmware immediately and then switch on automatic updates.

You May Like: Can You Have 2 Internet Routers In One House

Place Your Router Centrally

This might seem like an obvious tip, but its one you shouldnt ignore . Regardless of whether you have DSL, cable or fiber technology, router placement will impact connectivity. Your router should be placed in a central location in your home so that it can easily reach all of the devices it needs to support. If the source of internet in your home isnt centrally located, its worth investing in an ethernet cable to carry the signal to a more central location where you can connect the router.

Give Your Router A Break

Here

Reset your router every month or so to give the device a break and refresh your internet connection. If you experience serious speed issues, you might consider resetting your router every day.

If you have a modem separate from your router, reset that too. Resetting the modem stimulates your connection to your ISP, and thats what turning it on and off again is all about.

Dont want to add another task to your to-do list? Easy, get an outlet timer like Century’s programmable timer. You can plug your modem and router into a timer that will turn the system on and off for you. Set the timer to restart the system every night while youre in bed. That way, you can wake up to that fresh internet feeling every morning.

Keep in mind resetting your router and modem wont magically turn your snail of a connection into a cheetah. But it will helpand its a super easy fix.

You May Like: Mac Display Wifi Password

How To Get Better Wi

by Natasha Stokes on April 12, 2021in , , ::

If you’ve been working from home or the kids are attend school remotely, chances are youve been confronted with the grim reality of a faltering internet connection. Your connection speed can be influenced by your routerhow old it is, how good its processor and antenna are, how good it is at picking up wireless signals and how many devices are using it. Newer routers may support faster WiFi technology and can do things like prioritize certain traffic streams, such as business video calls, or work devices over the kids tablets.

In some cases, your connection speed may even come down to your service provider’s preference for certain kinds of traffic. Service providers prioritize voice traffic first, then their own video services.

Luckily, there are several things that can help you get more out of your bandwidth. Heres what you can boost your WiFi speed.

How To Use A Wi

Do you have a spot in your home such as a bedroom or out on the deck where its just harder to get a reliable Wi-Fi signal? Youre not alone. Luckily, through better Wi-Fi router placement or tech such as a Wi-Fi extender or Wi-Fi booster, you can easily enhance your internet strength. Heres what you need to know.

Recommended Reading: Wifi Extenders That Work With Spectrum

How Do I Increase My Wifi Signal Strength

You need a strong WiFi signal to have strong WiFi. If your signal is weak everything slows down and an Internet connection is either frustrating or nearly impossible. There are some common things that can cause your WiFi signal strength to struggle: distance, obstructions, interference, capacity and devices hogging bandwidth. All it takes are a few adjustments to increase your WiFi signal.

Tip #: Check For Equipment That Might Be Causing An Interference

Make your WiFi WORK

As wireless networks utilize radio frequencies to send and receive data, theres a chance your wireless signal may be weak due to interference from equipment sending radio signals. All of the following devices can interfere with wireless signals:

  • Microwave
  • Cordless telephones
  • Some satellite TV receivers

In general, wireless technology of various sorts is only increasing. This means that you likely have multiple forms of wireless equipment sending signals throughout your home. If any of that equipment is operating at the same frequency as your wireless router, interference is going to occur.

Youll know that youre dealing with a signal interference issue if any of the following are true:

  • Your wireless devices consistently show low signal strength or the signal strength appears to go up and down even when youre not changing locations
  • You experience a far slower internet connection when connected to Wi-Fi
  • Your file transfer rates suffer when connected to Wi-Fi
  • Bluetooth devices have difficulty pairing
  • You regularly lose internet connection

If you believe there may be interference issues, turn off your other devices that are also sending out wireless signals, one by one. Check to see if there is a difference in the signal strength or range after you turn off each device. If you see a noticeable change after any device is turned off, youve found one of the culprits.

Don’t Miss: Resetting Blink Module

Centralize And Raise The Router

The position of the router in your home matters a great deal. If you have the router placed in a far corners of your home, chances are, you get spotty signal on the other end of the house.

The ideal location of a router is as close to the center of your home as possible, in an open area, away from other electronics, with maximized visibility. The more walls, doors, and other obstructions near your router, the higher the chance of something interfering with your signal.

It’s also better to keep the router higher. Routers tend to spread signal downward, so if it’s resting low or on the floor, you’re not maximizing your coverage.

Upgrade Your Router Or Add Extenders

Replacing your router is always something of a last resort. Not only can a new router be expensive, but it’s a lot of work to set up a new router and have your various devices join the network. But if your router is limited to obsolete 802.11n or 802.11g standards, for example, you might want to look for an 802.11ac or Wi-Fi 6 router.

If you have an especially large house and your router isn’t yet obsolete, you might want to add one or more Wi-Fi extenders. These are small, affordable devices that amplify the Wi-Fi signal and therefore extend the coverage area in your home. You’ll generally need to plug them in close enough to your router that they receive a solid, reliable signal, but are close enough to your home’s “dead zone” to fill in the gap. The major disadvantage of extenders is that they usually have their own SSID, so you need to change Wi-Fi networks when going from one end of the house to the other.

Another alternative: Upgrade to a mesh network. Mesh routers usually come in two or three components rather than a single router, and you connect them in different locations throughout the house. Together, they deliver a strong and fast signal over a much larger coverage area than a typical router can do on its own. For recommendations on this front, check out Insider Reviews’ guide to the best Wi-Fi mesh networks.

Also Check: How To Change Your Wifi Password Optimum

Even Better Install A Wifi Mesh System

Recognizing the challenge of delivering seamless WiFi coverage to the typical home, NETGEAR designed a solution that eliminated the pitfalls of the previous methods. The result is the Nighthawk Mesh Extender system, which provides seamless, broadened WiFi range without the login disruptions, bandwidth issues, or the setup complexities characterized by installing traditional extenders and additional routers.

The Nighthawk Mesh Extender system is unique in several key areas. First, it has a backhaul radio with a dedicated connection to your router that is not shared by your connected devices. Not only can the router and mesh system communicate directly with one another, but the 2.4 GHz and 5 GHz bands are available for devices to transmit data at the highest speeds possible. This division of labor is a total game changer in range extension.

Another difference is that the Nighthawk Mesh Extender system shares the same network name and security credentials of the existing router. You can therefore walk around your home, and your device will seamlessly connect to the strongest WiFi signal, whether delivered by the router or by the Nighthawk Mesh Extender.Because there is only one network name with one password, you wont experience any disconnects.Your WiFi connection works as seamlessly as you would expect it to.

Ways To Get Much Stronger Wi

How to get Better WiFi Signal?

Easy fixes to improve your internet connection while everyone’s clamoring to get online!

The products and services mentioned below were selected independent of sales and advertising. However, Simplemost may receive a small commission from the purchase of any products or services through an affiliate link to the retailer’s website.

Its a problem weve had at our house for years. We consistently have interruptions when trying to stream Netflix or Amazon Instant Video. Even worse, we struggle to get a good internet connection in our bedroom .

Luckily, with some new technology and some tweaks to my router, I now have great Wi-Fi across my entire house. Here are a few easy things I did that really helped.

Also Check: Connecting Sony Bravia Tv To Internet

Tip #: Reduce The Number Of Devices Using Up The Bandwidth

Low signal and strength issues can be a problem with the applications and devices using your internet connection. Activities that can be significant bandwidth hogs include:

When devices are using a large amount of your bandwidth, they can cause slow-downs for other devices that can have the appearance of poor signal strength.

Try reducing the number of devices you have eating up your internets bandwidth at any one time. If you intend to stream high-quality video or play online games, try doing so without multiple devices running as well.

You can automate this process somewhat if your router utilizes Quality of Service methods. These methods automatically prioritize operations to help reduce connectivity and bandwidth issues. Check with your router manual or device manufacturer to determine if your device utilizes Quality of Service, and if so, how to adjust the device settings to make it work.

Make Sure Youre On The Right Frequency Band

Modern routers work primarily on two radio frequency bands: 2.4 GHz and 5 GHz. The band you use for your connections can affect your speeds and the quality of your connections at different distances from your router.

The 2.4 GHz band is the oldest and most commonly accessed Wi-Fi connection. Its used for many other wireless communications other than Wi-Fi, so the airwaves in this frequency can be a little crowded. This band trades speed for rangemeaning its better at passing through walls and other objectswhereas 5 GHz has better speeds but a shorter range.

The two frequency bands often appear as two separate Wi-Fi networks. To reorganize your connections, log off from the incorrect band and connect to the correct one on each device.

Connections best for 5 GHz band:

  • Gaming consoles

Connections best for 2.4 GHz band:

  • Smart speakers
  • Security cameras

Recommended Reading: Troubleshooting Blink Sync Module

Interference From Household Appliances

A variety of household appliances can cause wireless interference, including cordless phones, baby monitors, and microwave ovens. Depending on the positioning of your wireless router, your networked device, and the appliance, you may even have the wireless network cut out when the microwave or cordless phone is in use.

Problems with cordless phones can be solved by replacing your phones with phones that operate on a different frequency, such as 900 MHz or 1.9 GHz. Cordless phones using the 2.4 Ghz frequency will interfere with wireless networks.

Problems with microwaves can often by solved by positioning the your devices such that the microwave isnt between your router and the device. its also possible that a new microwave will help, if the new microwave has better shielding.

Other devices can also cause problems. For example, older Bluetooth devices can interfere with nearby Wi-Fi signals, although newer Bluetooth devices dont.

Image Credit: Kai Hendry on Flickr

Find The Sweet Spot For The Router

How to INSTANTLY Make Your WiFi Speed Faster

Before you throw money at the problem, you should first check that your wireless router is placed in the right spot. Remember, the router is sending the Wi-Fi signal in all directions equally, more or less.

The illustration below shows an example of how a router placed in the corner of the home might not provide whole-house coverage.

Therefore, putting the router as close as possible in the center of your desired coverage area will usually give you the best range, as depicted in the next illustration. Dont just pick the middle of your home, think about which rooms really need coverage.

As you might remember, your Internet modem is connected to the router. So you need to consider the locations of cable or telephone outlets cable if you have a cable Internet connection and telephone if you have DSL Internet. This will limit where you can place the router.

If it looks like there is a better spot for the router where you can also hook up the Internet modem, go ahead and try it. Then see if it fixes your connection problems. If not, you can try the other techniques that follow.

Also Check: My Spectrum Self Install

Popular Articles

Related Stories

Stay on op - Ge the daily news in your inbox