How To Increase My Wifi Router Signal Strength

Test Your Internet Speed To See If The Problem Is With Your Internet Service Provider Dave Johnson/business Insider Make Sure You’re Connected To The 5ghz Band

How to Improve Signal Strength on a Wireless Network

If you have a dual-band or tri-band Wi-Fi router, you should be using the 5GHz band rather than the 2.4GHz band whenever possible. Many smart home devices can only use the slower 2.4GHz band, but your phone, laptop, tablet, and TV should all be connected via 5GHz to take advantage of the significantly higher speeds it offers. Use the Wi-Fi settings on each of your devices to see what Wi-Fi band you’re using. Incidentally, if your router doesn’t have a 5GHz band, then you should definitely upgrade.

Buy A Wireless Booster

Wi-Fi extenders – also called repeaters or boosters – increase your Wi-Fi signal by ‘capturing’ the wireless signal from your router and then rebroadcasting it. Some people rightly wonder whether they really work: they do, but they’re not the best option if you need very fast Wi-Fi speeds.

They are cheap, though, and easy to install. Models such as TP-Links TL-WA860RE can cost at little as £20 / $20 or so. However, this uses the older 802.11n standard. If you want something faster and more up to date, then the TP-Link RE300, which supports 802.11ac, is about £35 / $35.

You can use a Wi-Fi repeater to boost the signal from a router on a different floor of a house or on the opposite side of a building.

A repeater uses half its internal antennae to receive a wireless signal and the other half to transmit a new signal effectively halving the potential speed of the original Wi-Fi signal.

This shouldnt be that noticeable for light web browsing, email, etc, but can be felt when moving large files around the network such as high-definition video. Thats why we prefer Powerline for the more demanding tasks. But you might find it’s still perfectly good for streaming Netflix or YouTube.

Remember that the extender is just boosting the signal. If its placed in a spot where Wi-Fi is already weak then it will merely push around that weak signal. Place it in an area with better Wi-Fi and the signal it pushes out will be stronger, too.

Tip #: Reduce Bandwidth Competition From Other Devices

Limit the number of devices in your home that share your WiFi network during peak usage hours. The more bandwidth is used in total, the less speed you see on each device. Try to power off or disconnect devices that you aren’t using. If necessary for plans with lower speeds, develop a household schedule that helps you manage which devices or which members of the family can do certain activities at different times.

Here’s why: All the wireless devices in your home share your WiFi connection. So the number of devices running at the same time impacts your internet speed significantly. The more devices you start adding to the network, the less speed you’ll get when working from home on your laptop, streaming on a tablet, etc. Gaming systems, video streaming devices and smart TVs, and a number of other smart home systems can eat up a significant portion of bandwidth. In addition, many connected devices are always on and may frequently run updates in the background that you aren’t aware of, all of which can slow speeds down.

Are you a Fiber customer? Check your router requirements.

Customers with Fiber Internet service have specific router needs. With a connection that fast, you need to make sure your gateway can keep up. If your service is connected using the wrong modem, you may not be getting top performance.

Don’t Miss: How To Enable Wifi On Windows 10

Keep Your Router Updated

If you follow the news, youve heard about the growing number of large-scale malware attacks that are costing businesses and individuals alike billions every year. Many of these attacks wouldnt be possible if all routers were kept updated. Once a malware infects a router, it can steal bandwidth and spread itself across the network to other devices.

But even without a presence of a dangerous malware, routers with old firmware perform worse than routers that are properly updated.

To check if your router is running the newest firmware available:

  • Launch a web browser on your computer or mobile device and connect to your routers network.
  • Enter the IP address of the router into the web browser.
  • If you dont know what the IP address is, check if there is an information sticker somewhere on the router.
  • Log in with admin username and password.
  • Again, if you dont know what the right admin password is, look at the information sticker on the bottom or back of your router.
  • Select an option called Firmware Update or Router Update.
  • Because there are many different routers, you may need to do some digging and detective work to find the right option.
  • Wait until your router finds and installs the latest firmware.
  • Never interrupt the update. If it takes a long time and your router appears to be unresponsive, give it a few more minutes before you disconnect the router from power and turn it on again.
  • You Might Be Getting Interference

    How to Boost WiFi Signal Strength : 5 Tips For WiFi Router ...

    Interference is another factor that might reduce the quality of your WiFi. Remember that it is traveling on a radio frequency that is often occupied by other devices or even other users. If you are in an apartment building, there might be several users who are all using the same frequency, causing traffic congestion.

    In those cases, make sure you have a dual-band router that can use the 5 GHz band. The 5 GHz band doesnt travel as far as the 2.4 GHz band, so you are less likely to run into traffic.

    Additionally, appliances in your home can interfere with the signal, including microwaves, cell phones, baby monitors, and even radios themselves. It is important to keep your router away from all of those devices so that you will not experience a reduction in signal quality from your router.

    You May Like: Can My Home Wifi Be Hacked

    Several Things Can Impact Your Wi

    Think of Wi-Fi as a bridge between your devices and the internet. Wi-Fi lets you use your smartphone to send or receive information on your home network rather than on your mobile data plan. To access it, you need a Wi-Fi router, which distributes a signal to your computer, printer, phone, tablet and any other device and creates a network.

    Wi-Fi isnt perfect. The signal gets weaker the longer the distance between you and the Wi-Fi router or the more physical obstacles such as a corner or a brick wall between your device and the router.

    In a pinch, you can temporarily create a hotspot with your mobile phone to supplement your Wi-Fi. But for a long-term fix, its worth it to check whether your Wi-Fi router is placed correctly or whether you can supplement the signal with a Wi-Fi booster.

    It Is Quite Possibly Illegal

    Actually amplifying your router or extender’s wireless signal to extend its reach runs the risk of being illegal in many countries. Local laws in for example Norway clearly specify both what frequencies and which signal transmission strength are allowed for indoor and outdoor wireless networks.

    clearly specify both what frequencies and which signal transmission strength are allowed for indoor and outdoor wireless networks.

    Any wireless device sold in a country with such laws must be approved in accordance with the local legislation. This means that the equipment you can buy will usually already be using the maximum permitted transmission strength under the law. Fiddling with this yourself will then quickly take you over the legal limit.

    Any solution causing the transmission strength limit to be exceeded, would then be illegal. Typical examples of hacks that may cause this are:

    • Extending the antenna using a soda can, Pringles tube, or similar.
    • Substituting a stronger antenna.

    Note that while Wi-Fi extenders or repeaters are sometimes referred to as Wi-Fi “amplifiers”, there is no actual amplification of signal strength involved. The repeater/extender simply repeats the signal from the router to create a new network that extends wireless coverage.

    You May Like: How Do I Know If My Wifi Extender Is Working

    How Can I Boost My Wifi Signal For Free

    Read on below to learn some of the easiest ways and free ways that you can improve your wireless routers signal without resorting to a new expensive model.

    • Adjust your WiFi Routers Settings.
    • Put it in the Center of your Home.
    • Dont Box it in.
    • Keep it away from Electronics.
    • Change the Wireless Router Antennas Direction.

    Extend Range With A Wi

    How to Boost Your Wi-Fi Signal Strength- Tips & Tricks

    The first Wi-Fi booster is a Wi-Fi range extender. A Wi-Fi extender picks up the Wi-Fi signal sent out by your router and lengthens it without negatively impacting overall internet speed. For example, if you get very poor service on a second floor and want to watch YouTube TV at night, you can place a Wi-Fi extender in a bedroom or bathroom. And, you can use multiple Wi-Fi range extenders to increase signal strength in different areas of your home. One key thing to note: check the signal on your router typically a number such as 802.11 and find a Wi-Fi extender that matches it.

    Also Check: Can Your Wifi See What You Search

    Place Your Router In A Perfect Spot

    Router placement is very important which is responsible for getting proper Wi-Fi signals. Make sure that, you must definitely place the router near the center of your house so that it broadcasts the signals out in all directions with equal strength. Dont place the routers within a closed room or behind the the TV cabinet or walls. This is because, if the router is placed behind a wall, it blocks some signal that eventually results in bad signal strength. If you want the best signal, youll need to place it in the open, free of any walls and obstructions.

    • Use Aluminium Foil to boost your Signal Strength at home.

    Using A Range Extender

  • 1Buy a Wi-Fi extender. Wi-Fi range extenders do exactly what their name implies: they take your router’s signal and repeat it so that you can connect to the network without moving your router or your Internet-connected item. There are countless models of extender available both in stores and online, so just pick one with high reviews and a comfortable price tag.
  • You can expect to spend between $35 and $100 on a decent Wi-Fi extender.
  • Most Wi-Fi extenders will work with multiple router models, but buy one from the same company which made your router if possible.
  • 2Understand that Wi-Fi extenders vary. While the following instructions comprise the bulk of Wi-Fi extenders’ setup processes, you will want to check your Wi-Fi extender’s manual for specific instructions on setting up the extender with your router.
  • 3Find a wall outlet near your router. It’s best to set up your range extender while in the same room as your router, so try to find a place to plug in your range extender within 20 feet of your router.XResearch source
  • If your extender is wireless, turn it on and then skip this step and the next one.
  • 4Plug in your extender. Attach your extender to the wall outlet via the extender’s plug. If the extender has any lights on it, you should see them turn on.
  • 5Press the WPS button on the extender. The WPS button should be on the front or side of the extender, though you may need to check your extender’s documentation to find it.
  • Recommended Reading: How To Use Your Phone Without Service Or Wifi

    Try Removing Your Phones Case

    Some of the materials used in phone cases are known to affect Wi-Fi signals. To determine whether your phones case is affecting your signal, take the case off, and perform a speed test using an online service like the Ookla Speed Test. Then test again from the same spot with the case on. If your phones performance is better without the case, then youve found your problem.

    Ookla speed requires a lot of permissions, so we suggest uninstalling it after youre done testing.

    Extend Your Wifi Range

    Wi

    Get a Wireless Range Extender. Some of these are expensive BUT there are also software programs that can use your computer as a hotspot to help extend your signal. The biggest thing you need to watch out for when choosing one, though, is to make sure it runs on the same signal type as your router.

    Optimize the Frequency Band: Depending on the frequency band your router is operating off of, you may get interference from other sources that are operating on the same frequency. Dual-band routers should be set to the 5GHz since most routers are operating off of a single band and fewer sources will be set to this. Fewer people operating on a band means less interference and greater wifi range.

    You May Like: What’s Wrong With The Wifi

    Diminishing Signal Strength Creates Dead Spots

    A strong signal is often a good indicator that the Wi-Fi connection will be fast and reliable instead of slow and intermittent. We can compare this to hearing other people talk in a quiet, open area, you can hear someones voice fairly well. On the other hand, in a building with thick walls, listening becomes more difficult. The same is true for indoor Wi-Fi. As distance increases, thewireless signal strength decreases, and different types of obstructions will further reduce signal strength.

    The below example shows what Wi-Fi signal strength would look like with and without building walls. The red colors represent a signal strength too low for good Wi-Fi connectivity:

    Wi-Fi Signal Strength Loss From Indoor Walls

    Free Space Path Loss With No Attenuation from Walls

    Use the following guidelines to gauge how different materials in your home affect the signal strength of Wi-Fi. Keep in mind that a 3 dB drop is equivalent to a 50% reduction in power!

    • Dry Wall: 3 dB

    What Is The Strongest Wifi Extender

    Get Wi-Fi in every room with the best Wi-Fi Extenders

    • Netgear AC1200 WiFi Range Extender EX6150.
    • D-Link Wi-Fi Dual Band Range Extender DAP-1520.
    • TP-Link RE350 AC1200 Wi-Fi Range Extender.
    • Linksys RE6500 AC1200 Dual-Band Wireless Range Extender.
    • D-Link DAP-1320 Wireless N300 Range Extender.
    • Linksys Velop Wi-Fi extender.

    Read Also: How To Setup Google Fiber Wifi

    Wifi Products For When The Diy Stuff Isnt Enough

    Reboot Regularly: Just like with any other electronics you use, you may tend to leave the router running constantly without ever rebooting. Dont do this. Make sure to reboot it regularly to make sure youre getting the most out of your wireless provider and help it to refresh itself.

    If all else fails

    Get new hardware

    My IT Project Manager hubs has used these devices in many of his projects and says they are the least complicated to set up and affordable:

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox