How To Reconnect Ring Doorbell To Wifi

Ring Doorbell Wont Connect To Wifi

Doorbell- How to reconnect doorbell to wifi

If your Ring Doorbell Wont Connect to WiFi, be sure to turn on the 2.4 GHz network for your router, Enable SSID Broadcast for the 2.4 GHz network and make sure your router is not too far from your Ring Doorbell or use a wifi extender. Finally, reboot your router and Ring to see if your Ring reconnects.

Take the following steps to reboot your router and your Ring:

  • Unplug the router for about one minute.
  • Plug it back in and check to see if the doorbell reconnects. If not, perform the next step.
  • Press the button to put the ring device in setup mode. Wait for 10 seconds.
  • Reconnect your ring device to the WiFi.
  • Is your WiFi problem still happening? If so, Ring manufacturers recommend checking the devices power supply. If its battery-powered, replace the batteries and see if thatll improve the connection. For other models, test the wires supplying your doorbell with electricity.

    Once the electric supply is sufficient and the router resets, the Ring device will connect to WiFi.

    Right Side Of Circle Is Flashing

    If its the right side of the circle that is flashing, it means the device is having trouble connecting to your home Wi-Fi. The usual solution here is to repeat the setup process, just like how you did before.

    But if it didnt work, such as the device failing when you move away from the router, there are a few other things you can do. One of them is to use an extender, which will amplify the weak signal of your Internet connection.

    What If My Ring Doorbell Still Wont Connect

    When in doubt, contact Ring technical support. Their specialists can walk you through your issue and help you come up with a solution.

    Otherwise, if you find your internet connection is still lacking, consider investing in the Ring Chime Pro , which is also a Wi-Fi Extender. Boost your Wi-Fi signal up to 2000 square feet while also bringing additional functionality.

    Are you tired of your Ring Doorbell depending on Wi-Fi? You could also consider the premium Ring Elite that doesnt need Wi-Fi .

    Also Check: How To Change Wifi On Blink Mini Camera

    How To Get To The Device Health Menu In The Ring App

  • From the Ring app, open the Main MenuThe Main Menu can be opened by selecting the three bats in the top left corner of the app.
  • Select Devices
  • Select the device whose Wi-Fi needs changed
  • Select Device Health
  • There are two things we want to take a look at here under the Device Health screen that can help clue you in on what may be causing your Wi-Fi troubles.

    Signal Strength

    While your device is connected to a network, there will be a section titled Network. Within that section you will be able to see the Signal Strength. Ring will display the measurement in what is called RSSI, or Received Signal Strength Indicator. Its measured in dBs, or decibels.

    Without getting into the technical details, just know that a number closer to 0 is better. The larger the number, the weaker the wireless signal.

    Make sure you are checking the signal strength from where the device is actually installed, and that you didnt bring it inside or closer to the router while you are in the process of troubleshooting.


    This only applies if you are troubleshooting a battery powered device. The second piece of information we can get under the Device Health screen is the power level of each battery. If the battery level is low, Ring wont have enough power to stay connected to Wi-Fi. Batteries do go bad after time, so if you find this is problem is happening frequently, go buy new batteries.

    How To Put Ring Doorbell In Set Up Mode

    How to Factory Reset a Ring Video Doorbell

    Before I tell you how to put ring in set up mode you must know what set up mode really do?

    The set up mode in ring is used to broadcast a temporary WIFI network which connects with the Ring App and then you will know how to connect your Ring doorbell to your Home WIFI.

    The moment your Ring device goes into set up mode, you will see the spinning light on the Ring Doorbell.

    To put the device to set up mode, press and release the orange button on the back of the Ring doorbell.

    However, if it is the first time you are setting up your Ring doorbell then it would go to set up mode automatically.

    You can check more ways to fix the problem at Ring support.

    Sometimes, it is possible that even after doing the above steps your doorbell will not go to set up mode and so you might need to do the hard reset or factory reset.

    Follow the below steps to hard reset the Ring Doorbell

  • Take out the device from the mounting, use the Torx 15 screwdriver to unscrew the doorbell.
  • Press and hold the orange button on the back of the doorbell for 20 seconds, you will see the light on front of doorbell flashing which means the device is restarting.
  • Once the doorbell restarts, press and release the orange button once again.
  • Don’t Miss: Do All Southwest Flights Have Wifi

    What Are Ring Devices

    Ring offers a wide variety of devices. Ring got their start as an independent company making smart devices, but they were quickly brought up by Amazon. Rings current lineup of devices includes cameras, alarms, lighting and sensors, and their most popular device the Ring doorbell.

    All these devices are designed to integrate with most smart home ecosystems but especially with Alexa/Echo, due to Amazon owning Ring. These Ring devices typically center around their video feeds and motion sensing, but the Ring security alarms have some additional features. All in all, Ring is one of the most popular producers of smart home devices.

    Why Are My Ring Cameras Offline

    If you saw a notice in the Ring app that looked like the one below, it means that many of your Ring devices are not connected. In this case, the most likely source of the problem is your wireless network connection. Following your arrival at the Device Health page, click Reconnect to WiFi and follow the on-screen instructions.

    Also Check: How To Set Up Two Wifi Routers On The Same Network

    How To Reconnect Ring Doorbell To Wifi Network

    Smart Home Devices have become an important part of ones daily life. You have smart cameras, smart speakers, and even smart doorbells. All of these devices are connected to the internet which makes it easy for you to access them at any time and almost anywhere. The good part about smart home devices like cameras and doorbells is that it brings you relief and a sense of safety. How, well you will always access the live feeds from your smart cameras and doorbells, see who is visiting your house and who is loitering around. If you have the Ring Doorbell, then you know what Im exactly talking about. Read on to know how to reconnect Ring Doorbell to WiFi network.

    Why would you want to reconnect your Ring Doorbell to a Wi-Fi network? Well, there could be times when you might shift to a newer location or have changed your Wi-Fi network password, or altogether set up a new Wi-Fi connection at your place. It could be at times that your Wi-Fi connection could be weak, and you need to reconnect the doorbell to the network every so often.

    Whatever the reason may be, it is always best to have the Ring Doorbell connected to your Wi-Fi network at all times- just for your peace of mind and safety. Read on to know how to reconnect the Ring Doorbell to a Wi-Fi Network.

    Ring Bell Is Not Connecting To The Ring App

    Change Ring Doorbell WIFI Network

    There are many different reasons for not connecting the app to your device, including:

    • The settings of the phone could not be congruent with the app.
    • The router is at distance from the device.
    • The modem of the device needs the setting.

    If there is no problem with the modem or you have already checked the setting of the modem, then the problem must be with your phone.

    Sometimes, if cellular data is being used by the phone, the app will not blow out correctly. Connect the app to the network of your home and try.

    Read Also: How To Change Your Wifi Password Optimum

    How To Connect The Ring Doorbell Device To Wifi

    Ring Doorbells first Wi-Fi experience wont be about connecting to your home network. Once you start setting it up, it first goes into setup mode, prompting you to download the app to your smartphone or tablet to move on.

    As soon as you download the app and set up your user profile, the app will connect to the nearest Ring Doorbell device. This works by creating its temporary Wi-Fi network when Ring Doorbell is in setup mode. This is used to connect the Ring app to the device, and once the setup is complete, it will connect to the Wi-Fi network.

    After you have followed the instructions on your smartphone or tablet, you will connect to your home Wi-Fi network and configure the settings. Once this is done, your device will connect to the Wi-Fi network you choose.

    How Do I Connect My Ring Doorbell To Wifi

  • Its simple and free to download the Ring app for iOS or Android.
  • Devices or package stickers must be barcoded or tagged with a MAC ID or QR code.
  • Include your home address in the name of the device.
  • Setting up the device requires that the setting be done in the devices setup mode.
  • Ring with your finger the Ring doorbell by tapping Join.
  • Recommended Reading: Blink Xt Camera Reset Button

    How To Fix Ring Doorbell Not Connecting To Wi

    Without a wireless signal, no Ring device will deliver the kind of performance that you expect from it. Even though youre using an app connected to the internet, the Ring Doorbell itself requires a signal to send and receive information from the app.

    While the doorbell should have been linked to a wireless signal during setup, sometimes you need to go through the process again to solidify the connection.

    Recharge Your Ring Doorbells Battery

    Easy Ways to Connect a Ring Doorbell to WiFi: 11 Steps

    Is your Ring doorbell battery-powered? Then the doorbell may disconnect from Wi-Fi because the devices battery is low.

    So, if your Ring doorbell disconnects from Wi-Fi, check whether the battery is low.

    You can check your Ring doorbells battery level by taking the following steps:

    • Click on the Menu icon in the Home Screen of Your Ring app. Then select Devices.
    • On the Devices menu, scroll down to the Ring Doorbell option. Youll see a low battery symbol next to the Ring Doorbell option.

    If youve confirmed that your Ring doorbell battery is low, recharge it to reconnect the device to Wi-Fi.

    Heres how to charge your Ring Doorbell:

    • Unscrew the bolt at the base of your Ring doorbell. Then slide the faceplate up.
    • Next, move the faceplate away from the wall.
    • Press the release tab on the Ring doorbell to remove the battery pack.
    • Insert the Ring doorbells micro-USB cable into the charging point on the battery pack.
    • Then connect the other end of the micro-USB cable into a charger.
    • Now, wait until the battery is charged to its full capacity.
    • Once the battery is fully charged, the status light will illuminate solid green. Now replace the battery pack.

    Don’t Miss: What Is The Best Wifi Extender For Spectrum

    Why Is My Ring Not Connecting

    For Android users who are having trouble connecting to the Ring network, you may need to make changes to the Smart Network Switch settings. As a result of regulatory limits on shipping lithium batteries, if youre setting up a new Ring gadget that runs on batteries, your battery will only be half charged when you receive it.

    Why Won’t My Ring Device Connect To Wi

    If you’re having issues connecting your Ring camera or doorbell to your Wi-Fi network, or the device itself keeps unpairing from Wi-Fi, there could be one culprits at play.

    Traditionally, Wi-Fi routers are designed to be placed in a centralized and unobscured location in your home. If your router is wedged behind furniture or placed inside a media cabinet, your Ring product may have issues detecting the network bands because they’re not being transmitted optimally. Try relocating your router to an un-blocked spot and see if that helps with connectivity.

    If you own a dual-band router, another issue you may be running into is that your Ring device isn’t actually compatible with your network’s 5GHz band. If this is the case, try connecting to the 2.4GHz band instead.

    One other issue could be that you’ve changed either your network name or password. Doing so will require you to reconnect any previously connected web devices using your new Wi-Fi network logins.

    You May Like: How To Find Wifi Password Mac

    How To Change The Wifi Network On Your Ring Doorbell

    William StantonRead more November 13, 2020

    Ring Doorbell is a Wi-Fi doorbell that is actually more than a doorbell. Yes, it fills the shoes of your typical doorbell but adds an impressive video intercom system that allows you to talk to your visitors, from your smartphone or tablet. You can do all of this from home, or from wherever, just as long as youre connected to the internet.

    Ring Doorbell Video devices are packed with useful features, the app is extremely user-friendly, and everything is easy-to-connect to Wi-Fi. Heres how to change the Wi-Fi network on your Ring Doorbell.

    Troubleshooting The Ring Wi

    Quick Fix: Ring Doorbell Loses WiFi Connection

    When you cant connect to a wireless network on your Ring device, there are a number of fixes that might help you establish the connection. Some are quite simple while others can involve having to move things around in your home. You dont have to try them all just attempt the ones that you feel work best for your setup.

    Recommended Reading: How To Find Out My Wifi Password Mac

    How To Connect Your Ring Camera Or Doorbell To Wi

    Ring’s assortment of security cameras and video doorbells are excellent smart home devices that allow you to add peace-of-mind surveillance to your residence in just a few simple steps. Think of your home’s internet as the lifeblood of your Ring device. Whether you’re connecting a new Ring device to your Wi-Fi for the first time, or your camera or doorbell requires a reconnection, getting your Ring product online is a quick and easy process that we explain below.

    • The MAC ID or QR code on your Ring device

    • A screwdriver

    Other than a screwdriver, drill, and your device’s included assembly materials, the only thing you’ll need to get your Ring gear up and running is a Wi-Fi connection. While your Ring hardware will still be powered in the event of a network outage, you’ll be hard-pressed to get any actual camera or doorbell features to work without Wi-Fi.

    First, let’s cover how to connect a fresh-out-of-the-box Ring device to your home’s Wi-Fi network.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox