How To Remove Devices From Wifi

How To Remove A Device From The Network

How to remove any device from your wifi network using MAC address || PTCL

From time to time, you may want to remove a device from the network. You cannot permanently remove them from the network, but once they have been disconnected, they will be presented with the login screen once again and asked to reauthenticate.

1) Log into Winbox in the usual manner for the appropriate location.

2) Click IP and select Hotspot from the drop-down menu.

3) View the Active tab.

You will see a list of connected devices, identified by the assigned IP address and the User ID.

4) Select the user you wish to disconnect by clicking on the relevant row.

Once selected, click the red minus icon in the top left of the box. PLEASE NOTE Clicking will remove the user immediately with no confirmation check.

The User number corresponds to the unique profile number assigned by the social media provider. By pasting this number onto the end of the social media URL you will be able to view the users profile. The users privacy settings will limit how much you see.

For Example:

How To Remove Devices From Your Sky Wifi

  • Open your browser and type in the IP address for your control panel login page
  • Enter your admin username and password
  • Scroll down to the Address reservation section then click on Add. This will display a list of all the devices connected to your network. Take note of the devices IP addresses of the devices you want to remove from your wifi.
  • Scroll down to the Outbound services section then click Add
  • A page will open and under the IPv4 settings change the following drop-down boxes:
  • For Service change to Any
  • For Action change to Block always
  • For Access from change to Single address
  • Once youre done type in the devices IP address next to the Source IPv4 LAN start address

What About Software That Kicks People Off Your Wi

Search the web for this topic, and youll discover people recommending software like Netcut or JamWifi, which can send packets to other devices on your Wi-Fi network telling them to disconnect.

These software tools are basically executing a Wi-Fi deauthorization attack to temporarily boot a device from your Wi-Fi network

This isnt a real solution. Even after you deauthorize a device, it will still keep trying to connect. Thats why some tools can continuously send deauth packets if you leave your computer on.

This isnt a real way of permanently removing someone from your network and forcing them to stay disconnected.

Also Check: Can You Connect 2 Routers Together

Why Kick People Off Your Wifi Network

  • Slow bandwidth and internet
  • Hackers in control of your router, internet, network, and you
  • Friends downloading illegal torrents
  • Bandwidth exceeding FUP limits resulting in plan upgrade
  • Asking people to stop is not working, nobody listens to your requests

In all the above situations, its much more efficient and easier to just kick people off your WiFi network rather than asking them to remove themselves.

Whats Next: Start Using A Guest Network

How To Remove Devices From My AT& T Wi

If you are planning to share your WiFi but dont want users to access your main network, create a separate guest WiFi network. For instance, say if your main WiFi is called Batman, then you can create a guest network with the name Robin and ask your guest to join that instead.

Most routers have an option to create a guest network. Simply, log into your routers settings and look for the guest network feature. In some routers like DD-WRT, its available under Wireless option, in some its found under access control lists, or you can always Google it with your router model number.

Pros:

  • Permanent solution, the WiFi moocher can not reconnect later
  • Can change guest network password without changing the primary network password
  • Guest network dont have access to file sharing on your computer

You May Like: Can You Have Two Internet Routers In One House

Why Cant I Remove A Device From My Google Account

If your device has been linked through a third-party app , youll need to unlink it before you can delete it from Google Home. Open the Google Home app, scroll down to the device you wish to remove, and tap it. Near the top of the screen, youll see a Settings cog icon. Tap that icon, and youll enter a menu of options for that device. Near the bottom of the list, you should see Un-link and the name of third party app link. Tap that entry and a dialog box asking you to confirm will appear. You may also be able to access these settings by going into your vacuums app , seeking out Google settings, and unlinking from there.

Note that when you un-link that app, youll lose functionality for ALL devices youve linked through that app. So if you have six TP-Link plugs, you have to unlink all of them, then re-add the ones you wish to keep . Its baffling as to why you cant simply remove a single device without un-linking the app and removing all the other units from that company. Another common ask is , which isnt hard to do.

If You Can Access The Device Connecting To Wi

In the unlikely case that you have access to someones device and they havent set a password or cant stop you, you can remove the saved password. For example, you can tell an iPhone to forget the network or delete the saved Wi-Fi network profile on Windows.

Assuming you have access to the persons device and they havent remembered or written down your Wi-Fi password, this will solve your problem. They cant reconnect on that device unless they re-enter the password. Of course, they could view it on any other devices they have access to where the password is saved.

Read Also: Can You Have Two Wifi Networks In One House

Removing A Device From Your Xfinity System Using The Xfinity Xfi App

Now that you have filtered out the devices connected to your Xfinity WiFi without your permission, its time to remove them from the network.

To do this, follow the steps given below:

  • Login to your xFi app with your Xfinity account.
  • Go to the Devices section and then to the Connect section.
  • Tap on the device that you wish to remove and go into its Device details.
  • Here you will find the option Forget device.
  • Tap it, and the device will be removed entirely from your Xfinity WiFi network.
  • The above method will remove the device from the list of connected devices. Furthermore, it will also permanently delete all the network activity history recorded for that device.

    Now, if the device somehow connects to your Xfinity network again, it will show up as a new device. To avoid this, you can keep the unauthorized devices connected to your WiFi network but pause their access to the internet.

    This will prevent them from using your internet and thereby help improve internet speeds.

    Heres how to do this:

  • First, log in to your xFi app.
  • Make a new Profile name. You will use this for your blocked and unauthorized devices.
  • Now click the People icon and tap the Assign device button under the profile you just created.
  • Add all the unauthorized devices you identified in the previous step.
  • Once done, hit the Assign button.
  • A confirmation message will come up on the screen. Click on Yes.
  • Now, click the Pause all option and set it to Until I unpause.
  • How To Kick People Off Your Wifi On Any Device

    Remove Devices From Wifi Using Android

    While there is no way to kick someone off your WiFi network using CMD, the following method works in every situation. For instance, if you dont have access to a computer, rooted Android device or even when you kick someone off your WiFi with iPhone, you can still block the internet connection of any device on your network.

    Simply find the IP address of the device on your network that you want to block. You have to assign this same IP address to your device by going to the static IP address settings. Here is a detailed article on how to assign a static IP address to your device.

    Whats happening here is, since you are using the same IP address as your neighbor, the router will get confused. Because every router is different, there are three possibilities here the router simply disconnects both the devices from the network, the router will disconnect the old device from the network or you wont be able to connect to the network.

    One thing to keep in mind is that this method may not work every time. Especially, when the DHCP server is configured to assign automatic IP addresses. This is because the victim can reinitiate the connection and the DHCP server will give him/her a new local IP address.

    Pros:

    • No option to block multiple devices on the network or control speed
    • Might not work in every situation, since this trick depends on your router
    • You should know the IP address of the device you want to block
    • A temporary solution, the WiFi moocher can reconnect later

    How it works

    Read Also: Reset Optimum Wifi Password

    How Do I Limit A Device Connected To Wifi Converge

    Select More Functions > Security > Parental Control to access this parental control option. Parental control will allow you to keep an eye on your Internet access limits by clicking in the Parental Control area. To restrict a website on your device, click on the icon in the Website Filtering area on the right of this page and select where to set it up.

    How Can I Stop Devices Using Sky Wi

    There are many reasons to block a specific device from using your Sky Wi-Fi: perhaps the kids are refusing to put down their smartphones at the dinner table maybe your significant other has developed an all-consuming Fortnite addiction or it could be that youre just a Machiavellian genius who wants to watch the world burn. Whatever the rationale, heres how to stop devices using Sky Wi-Fi.

    The process is fiddly, but it should only take a couple of minutes to have the Wi-Fi all to yourself.

    First, type 192.168.0.1 into your browsers address bar, which will take you to the Sky settings page. A pop-up will appear asking for your username and password . Once youre through this Fort Knox-level security, click on the Advanced tab. Click LAN IP Setup on the lower horizontal menu.Scroll down to the Address Reservation section and click the Add button.This will bring up a table of all of the devices connected to your home network. We take security very seriously here at The Big Tech Question so Ive blurred my devices . Make a note either by copying and pasting or good old-fashioned pen and paper of the IP address of the device you want to expel from the Wi-Fi.

    Service Any

    Access from Single address

    Want to undo the process? Navigate back to the Firewall Rules page and delete the new listing in the Outbound Services box.

    Recommended Reading: Do Southwest Flights Have Wifi

    Change Your Wifi Password For Logging Into Your Hub

    • Youll need a username and password to log into your hub and change its settings. If you want to change the default username and password on your Sky router:
    • Make sure youre connected to your Sky broadband
    • Open a browser and type in 192.168.0.1
    • Enter your default username and password if you havent changed them. If they dont work reset using the steps above then try again
    • In the Old password slot type in your current password
    • In the New password slot type in your new password then repeat the new password again
    • Now you can reconnect all your devices to your wifi using the new password

    How To Delete A Saved Wi

    how to check who is using my wifi

    Chris Hoffman is Editor-in-Chief of How-To Geek. He’s written about technology for over a decade and was a PCWorld columnist for two years. Chris has written for The New York Times, been interviewed as a technology expert on TV stations like Miami’s NBC 6, and had his work covered by news outlets like the BBC. Since 2011, Chris has written over 2,000 articles that have been read nearly one billion times—and that’s just here at How-To Geek. Read more…

    Windows 10 saves a list of Wi-Fi networks you connect to along with their passphrases and other settings. If you want to stop your PC from connecting to a network automatically, youll need to make Windows forget the Wi-Fi network.

    The process was obvious in Windows 7, where you could just select Manage Wireless Networks in the Control Panels Network and Sharing Center and delete saved networks. Windows 8 removed this option and forced you to use Command Prompt commands. But in Windows 10, Microsoft once again provides a graphical interface for this.

    Recommended Reading: What Wifi Extenders Work With Spectrum

    How To Kick Off Other Devices From Your Wifi In Windows Pc

    Almost 3 out of 5 people are having their personal WiFi network at their home and workplaces. Countless people steadily try to use others WiFi networks, by cracking their key or by any other method. So, now you can now secure your WiFi network from others by kicking off all unknown devices from your WiFi. Simply, go through the post to know about it.

    You can now disallow other persons to connect to your WiFi network. Almost 3 out of 5 people are having their personal WiFi network at their home and workplaces. Countless people steadily try to use others WiFi networks, by cracking their key or by any other method. So, we have an excellent trick by which you can find out who are using your Wifi network. Moreover, you can also kick off other devices from your Wifi network too.

    How To Remove Devices From Wifi Sky

    Over the last several years, router security has improved tremendously and now you can secure your wifi network better. However, if someone gains access to your network whether a remote hacking or your next-door neighbor, it will be very easy to compromise the connected devices.

    The good news is there are easy ways of significantly reducing this risk and removing the devices from Sky wifi by logging into your hub and changing your Sky broadband password. Then youll need to disconnect all your devices and reconnect them using the new password youve just created.

  • Does Sky broadband block VPN?
  • Read Also: How To Reset Blink Sync Module

    Option : Use A Guest Network In The First Place

    If youre giving a guest access to your Wi-Fi network, you can make this process much easier on yourself by setting up a guest Wi-Fi network on your router. The guest network is a separate access network. For example, you could have a network Home Base and another one named Home Base Guest. Youll never give your guests access to your main network.

    Many routers offer this feature, calling it a guest network or guest access in their settings. Your guest network can have an entirely separate password. If you ever need to change it, you can just change the guest network password without changing your primary network password and kicking your own devices off.

    Guest networks can often be isolated from your main network, too. Your guests devices wont have access to file shares on your computers or other network-connected resources if you enable isolation or disable allow guests access to local network resources, or whatever the option is called.

    Once again, youll have to dig into your routers settings to see if it has a guest network feature. However, guest networks are much more common than access control lists.

    RELATED:How to Enable a Guest Access Point on Your Wireless Network

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox