How To Rename My Wifi

How Do I Change My Wi

How to rename your WiFi network name to prevent from wireless signal conflict

Every Wi-Fi network has a default name and password, also known as an SSID and network key. You can find these on the Wi-Fi security card supplied with your modem, or on the modems label. For added security, you can change these to a name and password of your choice.

If your modem is from Telstra:

  • On your computer or tablet, connect to your Wi-Fi home network
  • Open a web browser Chrome, Internet Explorer, Firefox, or Safari
  • Enter the correct URL for your modem.For ADSL/cable/nbn compatible modems with an adapter enter http://10.0.0.138 or http://telstra.gateway/For cable modems without adapter – enter http://192.166.0.1 or http://telstra.gateway/
  • If youre using a Telstra Smart Modem or Telstra Gateway Frontier┬«, you need to enter http://192.168.0.1 or http://mygateway/
  • If you need them, the default credentials to access your modem’s Home Page are:Username: admin
  • How To Change Your Wifi Name And Password On Your Router

    Are you tired of the same old wireless names? Most people keep the default wireless network name and password that comes preset with their router, but we recommend you change them. Not only are the stock credentials generic and boring, but theres a good chance someone around you is using the same SSID.

    Instructions on how to change your Wifi name and password are listed below, but we thought wed give you a list of some of the funnier WiFi names weve seen.

    1. Drop it like its Hotspot2. Go Go Gadget Internet3. 99 problems but WiFi aint one4. The Promised LAN5. The LAN before time6. Tell my WiFi love her7. Pretty Fly for a WiFi8. FBI Surveillance Van9. Click here for Virus10. Germ Warfare Room12. I believe Wi can Fi13. It hurts when IP14. Get off my LAN15. We are Watching You

    Choose a SSID that is unique, but never use personal information such as your name, birthday, or address. Your WiFi password should be unique too. Choose a password that is not associated with any other account.Use the following links to jump directly to the instructions you’re looking for on how to change your WiFi login information:

    Asus

    One: Find Your Routers Ip Address

    Most routers provide a web-based administrative interface that you can access via your browser by typing in the routers local IP address. Your first step is to find that IP address.

    Note: Some routers provide different admin interfaces. For example, if you have an Apple Airport router, you can use the Airport Utility on your Mac to change its settings. Other router manufacturers offer smartphone apps for changing settings, and some more expensive routers are even beginning to include built-in touchscreens. So be sure to check for specific instructions for your router.

    The chances are pretty high that youll need to use a browser to access your router. Its best to do this from a computer, though, because many routers dont have a mobile-optimized web interface that works well on smartphones and tablets.

    On a PC running any version of Windows, the quickest way to find this information is in the Command Prompt. To open it, press Windows+R, type cmd, and then press Enter.

    At the Command Prompt, type the command ipconfig and press Enter. In the results, look for the section showing your current network connection The routers IP address is displayed to the right of the Default Gateway entry.

    In macOS, click the Apple menu, and then select System Preferences. In the System Preferences window, click the Network icon, select your Wi-Fi or wired Ethernet connection, and then click Advanced.

    You May Like: How To Reset A Blink Mini Camera

    How To Change Your Spectrum Wifi Network Name And Password

    To change your Spectrum WiFi name and password, open a web browser and enter your routers IP address into the address bar. Then sign in and select the band you want to change. Finally, type in your new password and network name under the Basic tab and click Apply.

  • Find your routers IP address on the back of your Spectrum router. You can find this next to Router login. Usually, this will be 192.168.1.1. However, it could also change, depending on your setup. If you want to know more about how to find your routers IP address, check out our step-by-step guide here.

    Note: To make things easy for you, it is best to write down your router login, Username, and Password. You will need this information later.

  • Then open a web browser. This can be Chrome, Safari, Firefox, or any other web browser you want to use.
  • Next, type your routers IP address into the address bar.
  • Then hit Enter on your keyboard.

    Note: If you see a warning screen that says, Your connection is not private, click Advanced and then Proceed to

  • Next, enter the name and password for your Spectrum router and click Login. You should also be able to find this information on your router. However, if you dont see it there, check out our guide on how to find your routers username and password here.

    Note: This is not the same as your WiFi username and password. For most Spectrum routers, the default web access username is admin, and the password is also admin.

  • Then click on the Basic tab.
  • Know Your Current Network Name

    How can i rename my wireless network connection? Solved ...

    Before proceeding, it is better to know your current network connection name. This helps in finding the target network connection when you want to change its name.

    To find your current network name, click on the network icon in the taskbar. You will see the network name in the network connections flyout menu. In my case, the network name is Network 2.

    Alternatively, you can also find the network name from the control panel. To do that, search for Control Panel in the start menu and open it. Now, go to Networking and Sharing Center. You will see the network name in bold letters under the View your active networks section.

    Once you know your current network name, proceed to rename the network name.

    Don’t Miss: Dunkin Donuts Wifi Sign In

    Change The Security Setting

  • Open the AirPort Utility app on your Mac, located in the Utilities folder in the Applications folder.

  • In the graphical overview, select the base station you want to configure, then click Edit. You may need to enter a password for the base station.

  • None: This option leaves your network unsecured any device may join this network and wireless communications are not encrypted.

  • WPA/WPA2 Personal: If devices that only support WPA will use your wireless network, choose this option.

  • WPA2 Personal: In most situations, this is the recommended security setting.

  • Note: Enterprise-level security options are recommended for enterprise use only.

  • If you want the wireless password to be remembered in your macOS keychain, select Remember this password in my keychain.

  • To save your changes, click Update.

    Note: If you dont click Update within five minutes of resetting the base station, it defaults back to the previous password.

  • How Do I Set Up My Ignite Internet And Pods

    To install and use Ignite WiFi Pods, youll need an Ignite WiFi Gateway modem included with our new Ignite InternetTM packages and bundles. Then follow the steps below.

    Not sure if you have the Ignite WiFi Gateway modem? Check under Internet on your MyRogers account.

    If you need help at anytime, you can chat with Anna, our virtual assistant.

  • To begin your self-install, make sure youre registered for MyRogers.
  • Havent registered yet? Register now.
  • Registered but forgot your username or password? Reset your credentials.
  • Download the Ignite WiFi Hub app to your phone from or App Store . Keep in mind, youll need a Bluetooth-enabled phone with a compatible operating system to install your pods.
  • Install your Ignite WiFi Gateway modem first. You can view the Self-Install Guide here.
  • Once your gateway is online, you can install your Ignite WiFi Pods by following the the Easy Setup Guide.
  • After installation is complete, allow 48 to 72 hours for your pods to optimize. You may not notice an immediate improvement in your WiFi until your pods have completed this process.
  • You May Like: How To Show Password For Wifi On Mac

    Why You Should Change The Ssid

    Typical default SSIDs are simple words like Wireless, Netgear, Linksys, and Default.

    There’s a good chance that your neighbors have the same type of router you have using the same default SSID. That could be a recipe for a security disaster, particularly if neither of you uses encryption. Check your router’s SSID, and if it is one of these defaults, change the network name to something only you know.

    How To Change Your Spectrum Wifi Name And Password With Your Spectrum Online Account

    Networking Tutorial 2 of 4 – Rename Your Wireless Network

    To change your Spectrum WiFi name and password with your account information, use a web browser to go to spectrum.net. Then click Services > Internet and select Manage Network. Finally, enter a new password and network name and click Save.

  • Open a web browser.
  • Then type spectrum.net into the address bar and hit Enter.
  • Next, enter your Spectrum username and password and click Sign In. If you are having trouble logging in, click Forgot Username or Password?
  • Then click Services. You will see this at the top of the window.
  • Next, select Internet. You will see this below Services & Equipment.
  • Next, click Manage Network. If you dont see this option, click the blue arrow under Your WiFi Networks.
  • Then enter a new username and password.
  • Finally, click Save.
  • Don’t Miss: Do Southwest Flights Have Wifi

    How To Rename Or Change Network Name In Windows 10 & 11

    Dont like generic names like network 1, network 2, etc., for the network connections? Heres how to change the network name in Windows 10.

    Every connection in Windows 10 and Windows 11 has its own network name. Generally, Windows assigns generic names like Network 1, Network 2, etc., to all your network connections. If you have a router, then Windows might use the name you assigned in the router. When using multiple networks, the default names can be hard to remember or recognize one network from another. In those situations, changing the network name is quite helpful.

    However, you will not find any option in the Settings app or Control Panel to rename a network connection. You have to use the Local Security Policy or Windows Registry to change the network name in Windows 10 or Windows 11. It is pretty easy to do. Let me show you how to rename a network in Windows 10.

    Jump to:

    Change Wifi Hotspot Name On Android

    If you want to customize your Android phones name for WiFi hotspot and tethering, go to Settings> Mobile/Wi-Fi Hotspot and Tethering and turn it on. Then tap the Hotspot name option and type the name you want to show. On some Android phones, you need to tap the 3-dot menu icon and select Configure Mobile Hotspot option to replace the existing name with a name of your choice.

    So here ends our easy tutorial, if it really is, for beginners. We just hope it helps to change your Android device name. Bluetooth name, Hotspot name, and WiFi Direct name. For more useful tips and tricks for Android devices, do not forget to take a tour of our useful tutorials. Cheers!

    Also Check: Forgotten Wifi Password Mac

    Change Android Device Name From Settings

    The easiest way to change the device name of your Android device is by doing it from the About phone screen itself. Open Settings on your phone or tablet, scroll to About phone or device and tap on it. On the next screen, tap on Device Name, and then type the desired name for your device in the text field and select OK.

    Please Note: If you have a Samsung Galaxy device, you need to change the device name only and your Bluetooth name and WiFi Direct name will be automatically set. Go to Settings> About Phone and tap the Edit option under the device name. Type your custom device name and select Done.

    Dont Miss: Huge List of All ADB and Fastboot Commands

    Can I Use Different Pod Models Together

    How can i rename my wireless network connection? Solved ...

    Different pod models aren’t compatible with each other. To remove a pod, follow these steps:

  • Open the Ignite WiFi Hub app and sign in using your MyRogers username and password.
  • Select the Connect tab.
  • Select Remove Pod.
  • Select Remove Pod once more on the Are you Sure? screen.
  • It will take a moment to remove the pod, then select Close when the pod has been removed.
  • You May Like: Does Dunkin Have Wifi

    Find Your Router Login Details

    If you have direct access to your router, this is easy. Theres usually a sticker on the back that has the router login IP, admin and password. Find them and note them all down itll look something like this:

    If you dont have direct access to the router, then you can Google your router make and model if you know it, or perhaps your ISP and router, and it should be possible to find your router login and admin/password, as long as they havent been changed from the defaults. If theyve been changed, then youll have to get the details off the person who knows or do a full factory reset of the router to reset all login/password details to default.

    In any event, the router login IP is usually 192.168.0.1, 192.168.1.1 or 192.168.1.254 in North America and Europe, though it can vary.

    How To Change Your Ssid And Password On An Asus Router With Stock Firmware

  • Connect your computer to your Asus router via ethernet or by wireless.
  • Open a web browser. In the address bar enter your router’s IP address and, if prompted, log in. (The default IP address is typically 192.168.1.1 and admin / admin is commonly used for the username / password.
  • Click on Wireless under the Advances Settings Menu
  • Under the General tab enter your new Wifi name in the SSID field.
  • Select your preferred Authentication Method and enter your new Wifi password in the WPA Pre-Shared Key field. Depending on how many wireless radios your router has, you may have 1, 2, or 3 wireless sections. You will need to change the SSID and password for each section. You can use the same password, but each SSID should be different. We suggest adding a 24, 58, or 58-2 to the respective name.
  • Click Apply.
  • After the settings have been applied you will need to reconnect your wireless devices to your router using your new network login information.
  • You May Like: Change Blink Camera Wifi

    How To Change Spectrum Wifi Password And Wifi Name From My Spectrum App

    To change your Spectrum WiFi name and password, download the My Spectrum app and log in with your username and password. Then select Services > Update and type in your new password and network name. Finally, select Save.

  • You can find this on the for Android devices or the Apple App Store for iPhones and other Apple devices.
  • Then open the app and agree to the terms and conditions.
  • Next, enter your Spectrum username and password and tap Sign In.
  • Then tap Services. You can find this at the bottom of your screen.
  • Next, tap View & Edit Network Info.
  • Then type in your new password and network name.
  • Finally, tap Save.
  • If youre still having issues changing your WiFi name and password, you can always reset your router and use the default WiFi name and password. Check out our step-by-step guide on how to reset your router to factory conditions here to find out more.

    HelloTech editors choose the products and services we write about. When you buy through our links, we may earn a commission.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox