How To Reset Att Wifi Router

How Do I Troubleshoot My At Router

How to restart or reset att 5268ac wifi modem

Restart your gateway or modem manually

  • Unplug the power cord from the back of your gateway or modem.
  • Wait 20 seconds.
  • Put the internal battery back in, if you have one.
  • Plug the power cord back in.
  • Wait up to 10 minutes for the gateway or modem to restart and your Broadband light to turn solid green.
  • How To Factory Reset A Router With A Button

    Warning: As we explained above, this erases all your routers custom settings, including its Wi-Fi network passphrase! Youll have to set it up again.

    Nearly every router uses a different admin interface, but thats ok you might be able to bypass it entirely. First, look closely at the routermost have a reset button on the back or bottom. You might need an unwound paperclip to press it.

    On many routers, if you hold in the button for 10 seconds, it factory resets your router. If that doesnt work, try the 30-30-30 method:

    • Hold in the button for 30 seconds.
    • Unplug the router for 30 seconds.
    • Plug the router back in.
    • Hold in the reset button for another 30 seconds.

    Call A Professional Technician

    Image from Pixabay

    When all else fails, you can call a technician to figure out what is going wrong. As an AT& T customer, you can set up an appointment for a repair on this page.

    Before setting up your appointment, however, consider checking out the troubleshooting articles on that page to see if you can figure out what is wrong with your modem or router. You might not have to go through the trouble of getting a technician down to your house it might be something more simple.

    You May Like: How To Change My Optimum Wifi Password

    With That Said Lets Take A Look At The Steps You Should Follow In Order To Change Wifi Password

    • First of all, you should have a look at the side of the router where theres a sticker. This sticker has details like the IP address of the respective device and Device Access Code. For instance, it may come in the format of. XXX should be replaced by a specific number.
    • Now, get your computer connected to the same router if you havent done it already.
    • You should now enter the aforesaid IP address in a browser of your preference.
    • Provide with the Device Access Code when it prompts.
    • Now you should go to LAN and WiFi option.
    • Select the User Network option, and then you can change the WiFi password of the router as indicated.
    • Once the password is changed, you should select the Save option. This option is located at the bottom of the page .
    • Now, you will be able to use this new password to connect the devices with the network. The devices that are already connected to the network through WiFi will be signed off automatically. You will then have to use the new password in order to connect back.

    Besides, for people who want to know everything about Microsoft Virtual WiFi Miniport Adapter and How to find router IP address easily, these are just for you.

    Reset The Att Home Base

    Att Wifi Router Reset

    On the ATT Home Base router, you can find the reset button by taking off the bottom cover. Under this cover you will see a battery and some other spaces. In one of these other spaces is the reset button. See location in image below:

    Taking a straightened paperclip push down on the reset button for about 8 seconds to begin the reset process which can take several minutes to complete. Be patient and DO NOT UNPLUG OR TURN OFF THE ROUTER DURING THE RESET PROCESS. Doing so can cause permanent damage to the device.

    We strongly recommend exhausting your other troubleshooting options before you decide to reset.

    Also Check: How To Connect Roku Tv To Wifi Without Remote Iphone

    Perform The At& t Reset Sequence

    The reset sequence for your router is as follows:

  • Ensure that the device is powered on
  • Press and hold the reset button for about 10 seconds.
  • When the LED lights start flashing, let go of the reset button
  • Wait a minute or so for the LED lights to start lighting as usual.
  • Your AT& T router is now reset to its factory defaults.

    Reviews & Guides

    Change The Ssid On The 2wire Gateway

    The SSID is the name of your network. The default SSID on an AT& T 2Wire Gateway, one of the most common modem/routers, is typically 2WIRE plus the last three digits of the modems serial number.

    Everyone knows this and, while each modem has a different serial number, it doesnt take a genius to try different number combinations to access it. If you live in a busy apartment complex or somewhere with lots of AT& T customers, this doesnt help network identification either.

    In addition, naming your network is an opportunity to be creative. Sure, you could go with Sues Network but wouldnt The Domain of Doom look cooler? And either one is better than 2WIRE361.

    So lets change the SSID. Just follow these five steps:

  • Log into your 2Wire Gateway modem using http://192.168.1.254 in a browser.
  • Select LAN and WiFi.
  • Change the default name to something else.
  • Select Save at the bottom right of the page.
  • Changing the SSID is a simple step that makes a minor positive impact on security. However, it is more useful for network identification when there are lots of WiFi networks. When coming up with a name, try to make it memorable without giving away private information. So, rather than JohnSmithsNetwork or Apartment26WiFi, make it something that doesnt identify you by name or address. This is another minor security precaution but one that is worth doing while youre configuring your modem.

    Read Also: Canon Mx492 Not Connecting To Wifi

    Wireless Router Configuration Att

    How to Configure an AT& T Wireless Router. Plug the router’s power adapter into an electrical outlet. Connect the Ethernet adapter in the computer to one of the LAN ports on the router. Connect the Ethernet port on your broadband modem to the WAN port on the router. Check for solid green lights on your router to verify connections.

    Enable Dmzplus For Your Google Nest Wifi

    How to Reset Device AT& T Global Modem USB800 | AT& T Wireless

    Most ISPs provide the option of enabling bridge mode for using your own equipment.

    However, AT& T has an option called DMZplus for Pace gateway which does the same thing.

    To enable this, go to Settings > Firewall > Applications, pinholes, and DMZ. From the list of devices connected that have connected to your internet, choose your Google Nest Wifi.

    That should be the only available wired connection at this point.

    If you are unable to find it in the list, check if the list extends to other pages by clicking the next button.

    After selecting your Google Nest Wifi, scroll down and check the box Allow all applications . Then save your settings.

    If you have an Arris BGW gateway, enable IP passthrough under the Firewall settings.

    Use the device code on your gateway when prompted. Then, select the Google Nest Wifi under DHCP fixed and save the settings.

    Don’t Miss: Does Dunkin Donuts Have Wifi

    How To Change Your Router Settings

    Click the Windows logo located on the left side of the taskbar. Click the Settings icon. Choose Network & Internet. Click View your network properties. Scroll down and look for Default gateway.. The number next to it is your routers IP address. Type the address into the URL bar of your favorite web browser.

    Set Your Google Nest Wifi To Be Dhcp In The Wan Settings

    In your Google Wifi app, go to Advanced Networking in the Networking and General section.

    Tap on WAN settings and change it from Static IP to DHCP. Save the changes.

    This setting will enable the demilitarized zone option in your Gateway Settings .

    The app is fairly easy to maneuver, so this should not be difficult at all.

    You May Like: Wifi Extenders For Spectrum

    How To Find My Ip

    To enter the Windows Command Prompt and find the IP, you would have to open the windows menu and type down CMD in the search field.

    The first result will open up the Command Prompt and from there by typing ipconfig /all, all information regarding network IP will appear on your screen.

    However, there is another, yet easier way to locate and copy your IP. You can open up your web browser and simply search results under Whats my IP?.

    There should be a small window containing your IP address digits which can also access your routers information.

    Is Your Router The Source Of The Whole Issue

    Uverse Modem No Lights

    Before you rush to any conclusions, make sure you are certain that your router is the cause of the issue at hand. Dont mess with the router until you determine the problem isnt originating from the ISP side. To verify this, try to connect the computer directly to the modem. If it connects seamlessly, then the issue lies on the router.

    You May Like: Does Pokemon Go Need Wifi

    How To Reboot The At& t Router

    There are several ways you can reboot your device. You can use the Smart Home Manager to log in to the machine and use the web menu. You can also just disconnect the product from its power source and reconnect it. In this section, we’ll go over each method of rebooting your device.

    Rebooting an AT& T Router Using Smart Home Manager

  • Log in to Smart Home Manager using your computer or mobile device.
  • Turn off all of your other wireless devices connected to the internet.
  • At the bottom of the home page, click “Reboot Wi-Fi Gateway.”
  • The router will automatically turn off and turn back on.
  • Wait until the lights on the router turn back on. They should be solid green before you check for an internet connection.
  • Rebooting an AT& T Router Using the Router’s Menu

  • Log in to your router. It is best to use a computer for this. Turn off every other device that is connected to your device.
  • Look at the top of your screen. Click on the “Device” menu.
  • Under the “Device” submenu, click on “Restart Device.”
  • The router will reboot itself.
  • When the lights turn back on, and they are solid green, check for an internet connection.
  • Rebooting an AT& T Router Using the Power Cord

    This method is the easiest way to reboot your device you don’t have to log in to your router or the Smart Home Manager.

    To reboot your router using the power cord method, follow these instructions:

  • Turn off all devices connected to the router’s internet signal.
  • Once the router is off, unplug the router from the wall outlet.
  • Does Google Nest Wifi Work With At& t U

    RobotPoweredHome is reader-supported. When you buy through links on my blog, I may earn an affiliate commission. As an Amazon Associate, I earn from qualifying purchases.

    AT& T with its Uverse and Fiber is a dominant player in the market for internet service providers, yet the equipment they provide has not always impressed its customers.

    This has led to more and more customers preferring to have their own equipment in the form of routers and modems for their internet.

    One such product is the Google Nest Wifi, a mesh-capable wireless router that can provide high-speed internet along with maximum connectivity with any ISP such as Verizon, Xfinity by Comcast, CenturyLink, or Spectrum.

    Google Nest Wifi works with AT& T Uverse and AT& T Fiber. To set up the Google Nest Wifi with AT& T, change the WAN settings from static to DCHP on the Google Wifi App.

    Then, in the AT& T Uverse Gateways firewall settings, choose the Google Nest Wifi and set it in DMZplus mode.

    Lastly, in the LAN settings on the AT& T Uverse Gateway, change the IP Address Allocation from Private to Public.

    Reset both AT& T Uverse Gateway and Google Nest Wifi to start accessing the internet.

    Google Nest Wifi

    Recommended Reading: Mirror Iphone To Roku Without Wifi

    How To Enter An At& t U

    The most important thing to make sure of is that the device youre trying to reach to the routers control panel is connected to its network via WiFi or Ethernet cable.

    Using another network will NOT allow you to enter your routers control panel.

    Note: This guide applies to Windows-operated machines.
  • Open your CMD by pressing the Windows button and searching it in the field.
  • Type /ipconfig and press Enter.
  • Copy the Default Gateway IP by marking it with your cursor and pressing Enter.
  • Paste the Default Gateway in any internet browsers search field.
  • Click Enter and insert your routers login credentials .
  • This is how to enter the control panel of almost any router and if youre curious how to locate your IPv4, keep reading further.

    What Is A Factory Reset And When Should You Do It

    Wireless Internet Reset Device | AT& T Wireless

    A reset isnt the same as a reboot, which people sometimes mistakenly refer to as a reset. Just like a PC, a reboot shuts down your router and starts it back up. Its a good troubleshooting step if your router is acting strangely.

    A factory reset, on the other hand, wipes all your data from the router. This includes any passwords, Wi-Fi network details and passphrase), and any other settings youve changed.

    Essentially, its like you just purchased the router from the factory, hence the name. And thats the point. If your router is acting strangely and a reboot hasnt helpedor you think it might have router malwarea factory reset might fix the problem. But theres no going back, so this shouldnt be your first troubleshooting step. At the very least, try a reboot first. It might also be a good idea to upgrade your routers firmware and see if that fixes the problem.

    A factory reset is a good idea if youre selling or disposing of your router. This way, whoever gets your router next can start fresh, without seeing any of your personal information

    Also Check: Blink Xt Camera Reset Button

    Configuring The Under The At& t Router’s Main Menu

    To change your access code, click on the “Access Code” option under the “Device” menu. This screen prompting you to enter your current access code may appear.

    After entering your current access code, you will reach the page where you can change it. Fill out the fields and click “Use New Access Cod” to save your changes.

    Under the Wi-Fi menu of the Home Network tab, you can change your Wi-Fi network name and password. In the first section of the page, you will see the “Home SSID,” enable your Home SSID signal and change the Network Name and Password default settings. Retype your new password to confirm it.

    After changing your Home SSID, scroll down the page to the Guest SSID section. Turn on your Guest SSID signal and change the default username and password. Click” “Save” to save your changes to both the Home and Guest SSID values.

    You can run a speed test from your routers main menu. Click on the Diagnostics tab, and then click on” “Speed Test” Click on the “Run Speed Test button and watch for your results in the Test History section.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox