How To Restart My Wifi Router

How To Avoid Router Reboots

HOW TO RESET ANY WIFI ROUTER

Most problems with routers are caused either by overheating or by outdated firmware. Routers are basically just small and highly specialized computers, and they can overheat just like your desktop or laptop computer.

Never place a router close to a source of heat or hide it behind furniture where fresh air cant easily reach it. Of course, hiding a router behind furniture or placing it close to large metal objects is also guaranteed to significantly reduce the routers coverage.

Newer routers can update themselves automatically, but older models often have to be updated manually from their web interface. To access it, you need the routers IP address and the administrative users password and username. Both are often printed on a sticker located at the back of the router, so make sure to look there first. If you cant find the information, we recommend you search for help online because most routers are well-documented.

Using The Reset Button

  • 1Power off your computer.
  • 2Unplug your router.Advertisement
  • 3Wait 60 seconds and plug it back in.
  • 4Locate the small button labeled Reset. It’s an insert button that’s typically on the back of the router.
  • 5Straighten a paper clip. You will use this to press the reset button.
  • 6Press and hold the “Reset” button. The “Power” light should blink while you’re holding the button.
  • Newer models should reset after 10 seconds. On older models, however, you may need to hold the “Reset” button for 30 seconds.XResearch source
  • 7Wait for the “Power” light to stop blinking. When the “Power” light is solid, the reset is complete.
  • 8Power on your computer.
  • 9Open a Web browser to test for an Internet connection.
  • If you still don’t have an Internet connection, try restarting your computer.XResearch source
  • How To Reset A Modem

    The steps to reset a modem may be different dependingon which model you have, but the basics are the same. Here is the generalprocess:

  • Keep your modem plugged in.
  • Find the modems Reset button. This may be on the back or bottom of the device.
  • Press and hold the button with a paperclip.
  • Release the button when the modem lights start to flicker.
  • Wait for the Internet light to turn green.
  • While your modem or router is resetting, do not interrupt the process by clicking a link, closing your browser, or powering off the device. Doing so might corrupt the firmware.

    Now that you know how to reset your router, check out our guide on how to test your WiFi speed.

    Also Check: Two Wifi Routers

    Option : Use An Outlet Timer

    A simple plug timer is another way to reboot your router on a schedule. Older, nondigital timers, like the kind used for Christmas lights, tend to have a lower wattage rating. If you only need to manage the router, however, then a lower-wattage option could work just fine. Just make sure you get the grounded kind with a 3-prong plug for maximum safety.

    Most plug timers these days are digital and come in the range of 850 to 1800 watts, or enough to handle a major appliance. This is more than you need for a single internet router, but has the benefit of allowing you to plug in a whole power strip so you can reboot your router, smart home hub, and more, all at the same time.

    Your Router Is Low On System Memory

    How to restart Wi

    When your router boots, the processor throws everything that it needs into the system memory. Think of system memory as a temporary holding cell and scratch pad. At some point, all that data juggling not only wears down the processor but also fills the memorys capacity.

    With no working room, the processor slows, as do your wired and wireless connections. A reboot clears the memory so the processor can work optimally.

    Read Also: Airtime Player Southwest

    What Is A Factory Reset And When Should You Do It

    A reset isnt the same as a reboot, which people sometimes mistakenly refer to as a reset. Just like a PC, a reboot shuts down your router and starts it back up. Its a good troubleshooting step if your router is acting strangely.

    A factory reset, on the other hand, wipes all your data from the router. This includes any passwords, Wi-Fi network details and passphrase), and any other settings youve changed.

    Essentially, its like you just purchased the router from the factory, hence the name. And thats the point. If your router is acting strangely and a reboot hasnt helpedor you think it might have router malwarea factory reset might fix the problem. But theres no going back, so this shouldnt be your first troubleshooting step. At the very least, try a reboot first. It might also be a good idea to upgrade your routers firmware and see if that fixes the problem.

    A factory reset is a good idea if youre selling or disposing of your router. This way, whoever gets your router next can start fresh, without seeing any of your personal information

    Instead This Is How To Reboot Your Wireless Router:

  • Unplug your router or modem from its power outlet .
  • Wait 15-20 seconds, then plug it back in.
  • Allow the device a minute or two to turn back on.
  • It may seem simple, but doing this can solve many connection problems without the inconvenience that comes with resetting your modem or router.

    There are, of course, some times when youd want to reset your router or modem and start back at square one For most people in most cases, simply power cycling the device will do the trick.

    If you feel like conquering your network issues head on, feel free to check out our If you cant find what youre looking for there, feel free to email us at or give us a call at 548-2000 during normal business hours.

    You May Like: Does Southwest Airlines Have Wifi

    Resetting A Router Remotely

    Maybe you dont have physical access to the router, or your router is in a less-accessible spot, and youre groaning at the thought of getting to it. For many routers, you can reboot with access to the right website. You will need to know your public IP address for your router and some websites can help you out with this. Search your public IP address, and this should give you access to your routers administrative page . Again, your password information will be needed here.

    While every router brand has a different kind of site, most offer options to reboot your router remotely. Search the site for the word reboot or look at your router tools until you find the right option.

    Note: Make sure that you are rebooting/resetting and not doing a full factory reset. For router apps, in particular, reset options are often factory resets, not simpler reboots. Look carefully at the description before starting the process. Otherwise, you might find yourself disconnected from Wi-Fi when your router wipes your settings back to default.

    How To Automatically Reboot Your Router

    How to Reset WiFi Router (Any WiFi Router)

    In order to set your router to reboot automatically, youll need to access your routers settings.

    To do this, start by entering the default address of your router in your browser search bar. You can most likely find the default access location of your router on a sticker on the router itself. For example, the default access location for my TP-Link Archer A7 router is http://tplinkwifi.net.

    You can also access your routers settings by typing its IP address into the browser search bar. If you have a Windows system, you can find the IP address of your router by opening a command prompt window and typing ipconfig and pressing enter.

    Your routers IP address will be listed as the default gateway in the resulting information. As you can see, my default gateway IP address is 192.168.0.1. This is the IP address of most peoples routers.

    After typing in the default address location or IP address of your router into the search bar, enter your login credentials for your router.

    Once you have logged into your router, go to Advanced Settings.

    In Advanced Settings, there should be an option to change the system settings for the router.

    On my router, this section is called System Tools. In Seystem Tools theres a section called Reboot Schedule.

    In the reboot schedule settings, you can select the time and frequency that you want your router to reboot.

    After setting your router to reboot at a time that fits your internet usage schedule, select Save to lock in your changes.

    Recommended Reading: How To Sync Blink Camera To Wifi

    Dont Blame It On Your Router

    If your internet isnt working properly, you shouldnt immediately tear that electrical cord out of the socket wall. Do not come to the conclusion that your router is the main problem.

    Note:

    The best advice is to first:

  • Check the application level: If a router fails, so does the internet connection. Check where you dont have internet access and where you do. Restart applications like Netflix, YouTube, , your VPN app, BitTorrent and other online programs. Wait and check again.
  • Check your devices: Your router will continue to have problems if a third-party application or device is at the root of the problem. Deal with this first. Restart your computer, NAS, TV, smartphone and any other devices that have an internet connection through your Wi-Fi network. Wait and check again.
  • Check your router: Watch the lights and observe their colors, position and blinking rate. Green usually means okay, while amber means something could be wrong with a specific cable or interface. Disconnect any Ethernet or optical cables, wait at least 10 seconds, and put them back in the same position. Check the routers lights and verify whether your internet connection has been reestablished.
  • Troubleshoot via an Ethernet connection: Move next to your router and, if possible, use an Ethernet cable to investigate wireless problems.
  • How To Reboot Router The Right Way

    You might be wondering why you need to learn how to reset the router in the first place. After all, why not simply unplug it from power and then plug it back in? Theres a couple of reasons why, and well explain them when we get to them:

    1. Unplug your router first and your modem second.

    • If you have a router with a built-in modem, youll obviously have only one device to unplug. But if your router connects to an internet modem provided to you by your internet service provider, you should first unplug the modem and then the router.

    2. Wait at least 10 seconds.

    • There are many different router manufacturers, and each manufacturer has at least a few different models. Some routers may have a small battery inside them that allows them to store critical data in the event of a sudden and unexpected loss of power, while others may have memory chips that need a couple of seconds to lose any stored information.

    • Whats more, by keeping your router turned off for a while, you also give your internet service provider time to notice that your computers and devices are offline, which might trigger some automated action on their end.

    3. Plug your modem back in first and your router second.

    4. Go make yourself a cup of coffee or tea.

    • In other words, wait at least two or three minutes before you test whether youre back online.

    • Some routers take much longer than you might expect to boot up, and theres no point in testing whether youre back online before the boot process has completed.

    Read Also: Use 2 Wireless Routers

    How To Reset At& t Router

    Factory resetting your router or modem is occasionally essential while troubleshooting or setting up a new network. Users of AT& T U-Verse may also restore their devices to factory settings.

    Your WiFi name and password will be erased if you reset your device. Before you begin, make sure youre ready to reset the device.

    Internet Problems How To Reset Your Router

    How to Properly Restart a Router &  Modem

    If your internet keeps failing, it could be time to reset your router and refresh your connection.

    Are you experiencing issues with your internet connection? One of the things you can do to fix the issues is to reset your router. This is a fairly easy process, no matter what router model you have. The guide below walks you through how to reset your router.

    Recommended Reading: How To Sync Blink Camera To Wifi

    Reset To Default Password

    Know the process but just dont remember the password?

    In case you dont have the password, but also dont recollect changing them recently, you might be in luck. The default login and password might still work.

    • Look for the sticker with the username and password on the rear side of the router.
    • If you have the router manual that came with the package, you can easily find it there, if you spend a few minutes skimming through the pages.
    • Try a few common login/password combinations used by the router manufacturers. The most common username is admin and the popularly used default password is password. If it doesnt work, try using admin for both the login & password, it might work.
    • You can also use combinations of admin and blank for the credentials.

    Dont mistake the label mentioning SSID and the network key for your router login and password. They serve a different purpose. SSID is the name of the wireless network you connect with and the network key is its corresponding password.

    Please find some of the common usernames and passwords for a few OEMs.

    Router Brand
    adminadmin

    In case the default credentials didnt work, a manual reset is the next course of action. Lets look into the process of manually resetting the password and followed by the steps to set up a new password.

    Reset Your Router To The Default Settings

    Now that your settings are all backed up, its time to go ahead and start resetting your router to the factory defaults.

    Reset an Advanced DrayTek Router:

  • Go to the settings menu on your router.
  • Click System Maintenance on the left.
  • Select Reboot System from the menu that expands.
  • On the right, choose Using factory default configuration under the Reboot System section, and click Reboot Now.
  • Reset a Basic iBall Router:

  • Open your routers settings panel.
  • Head to the Maintenance tab.
  • Click Factory Default Settings on the left.
  • Click the Factory Default Settings button on the right.
  • Your router is now reset.

    Recommended Reading: Can You Have Two Wifi Routers

    What Happens When You Reset Your Router

    When you reset your router, everything stored on your router gets erased. This includes your wireless network settings, backup schedules, firewall rules, and any other options that you manually configured on the router.

    Basically, when you reset your router, youre actually bringing it to the state that it was in when you first unboxed it.

    Keep in mind that youll need to reconfigure all the settings once youve reset your router. Its a good idea to keep your network settings handy so you can use them when needed.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox