Why Is It Important To Power Cycle Your Router & Modem
Routers themselves are essentially little computers. Networking devices like routers and modems work the same way your regular computer would, which means they have a motherboard, memory, CPU, and software to make them function properly. These hardware and software components are prone to causing issues from time to time due to a variety of reasons. The same way your computer needs to be restarted every now and then in order to refresh running processes and clear cache.
Knowing how to reboot your router is useful because its one of the simplest solutions that can solve a range of connection problems. It doesnt take much time and it might be the solution when you are experiencing no connection, slow connection, or other wireless issues. It does not matter what type of connection you have, whether its an old DSL modem or something more modern like cable, fiber, or a satellite modem. As long as a router is involved, it is important to know how to restart it.
How To Put Your Ring Doorbell In The Setup Mode
Before knowing how you can put your Ring device in setup mode, it is necessary to know what exactly does setup mode does?
Basically, in a Ring doorbell, setup mode broadcasts a short Wi-Fi network. This network connects with your Ring app, and resultantly, youll know how you can connect your Homes Wi-Fi to your Ring Doorbell. Once your Ring doorbell gets into the setup mode, youll notice a spinning light on your Ring Doorbell.
To put your Ring device into the setup mode, simply press the orange button present at the backside of your Ring Doorbell. However, if youre setting up the Ring device for the first time, then it would automatically go into setup mode.
You can also look for more tips to resolve the issue at Ring support. In some cases, even after trying out the above steps, the ring device doesnt go into setup mode. For that, you have to do a factory reset or hard reset.
Here are the steps to hard reset your Ring Doorbell:
- Take off your Ring Doorbell from its mounting, then using a Torx 15 screwdriver, screw out the screws from your doorbell.
- Now, press the orange button present on the backside of your doorbell for nearly 20 seconds. After this, youll see a light blinking on the front of your doorbell, this indicates that your doorbell is restarting.
- When your doorbell restarts, once more push and release the orange button.
Is It Good To Restart Wi
It is important to restart your router when it is not connected to the Internet, or when it is slow in wireless connections, and should be one of the first troubleshooting steps you take when you are experiencing problems with your router. Rebooting the router every once in a while is also a good security practice.
Recommended Reading: Two Wifi Networks In One House
How To Resolve Wi
There are many reasons behind having your Ring doorbell connected to your Wi-Fi. One of the many reasons is that if your Ring Doorbell is not connected with your Wi-Fi, you wont be able to enjoy its smart features.
However, sometimes you may as well encounter some connectivity issues such as your doorbell keeps getting disconnected from the Wi-Fi or your device isnt able to connect to your Wi-Fi. For that, here are the steps to help you with resolving such issues:
- Firstly, examine your Wi-Fi network whether or not it is offering 2.4 GHz of connection, as this is a needed speed for your Ring Doorbell to function. If you have a low connection speed, then either switch your router or network provider.
- The second thing you can do is, simply turn off your modem for nearly 15-20 minutes, then restart it. Yes, it works! As your router at home keeps working for several months without stopping. Because of which they heat up sometimes, this also affects the network signal, hence, you face problems in getting a strong network.
So, turning it off for some time and cooling it down is one of the best things you can do!
- Thirdly, if youre still facing some issue or you simply dont trust online solutions, then you can reach Ring Technical Support. Here, you can explain your issue, and after checking theyll provide you with a solution.
If your internet connection is still very poor and lacking then consider investing in a Ring Chime Pro that also functions as a wifi extender!
What Will Happen If I Reboot Wi
A power cycle is sometimes referred to as this. By rebooting your router, you clean out the short-term memory of the device, which helps it run smoothly. In addition, it allows the router to reassign the least crowded channel for each frequency, which means your devices will have a better connection.
Recommended Reading: Do Southwest Flights Have Wifi
How To Use The My Centurylink App To Reboot
Did you know you can actually reboot your modem from anywhere with the CenturyLink mobile app?
Once you log in, select My Products at the bottom of the screen. If you have internet service, you’ll see a menu of options for internet. Tap on Reboot My Modem. Then, continue following the steps below.
Tap on the Reboot Now button. You can also choose to schedule a reboot for a later time .
Wait while the app sends the command to reboot your modem.
The reboot is now in progress. Click “OK” on the message dialogue to return to the Reboot My Modem screen.
You’ll need to wait for a few mintues while the reboot completes. If you are near your modem, you’ll see the lights go off, and then start lighting up again as it boots up. Once the INTERNET light turns green, you know you’re back online.
Another way to know when the reboot is done is to watch your phones WiFi connection. You will lose your WiFi connection when the modem shuts down. Then, once it boots back up and starts sending out the wireless signal again, your phone will either auto-connect OR you’ll be able to see your WiFi network show up in the list of available networks.
Should You Reboot Or Reset Your Router
A router reboot or reset depends on the situation. These terms have different meanings, although theyre used synonymously when referring to network troubleshooting.
A router reboot does the following:
- Clears out the memory
A router reset does the following:
- Reverts all settings back to their factory defaults
A router reset is similar to resetting a PC or a mobile device to its factory defaults. It restores the operating system, reverts all settings to their out-of-the-box state, and deletes everything you downloaded to the device.
You May Like: What Wifi Extenders Work With Spectrum
If Your Router Has A Power Button
Look at the back of your router. Check to see if your router has a power button on it. It should look something like this:
If your router has a power button, press it to turn the router off.
Now wait 30-60 seconds and press the power button again. This will turn the router back on.
Once the router has powered up and finished its initial setup, the reboot will be complete.
As an important note, on the back of your router you may notice a Reset button. For an example, refer to the picture above. Next to the Power On/Off button on my router is a Reset button.
This button is not used to reboot your router so do not press it. It will restore your router to its original factory settings and remove any changes you have made to its configuration.
Use the power button or the following method to reboot your router.
How To Reset Your Ring Doorbell Wifi
If youre a ring doorbell user, you mightve faced connectivity issues. There might be some situations where your Ring Doorbell lost connections with your Wi-Fi. Or it might also be possible when you move to a new place and work out to connect the Wi-Fi to your Ring doorbell. You might try to restart your doorbell to fix these issues.
Dont worry, here is everything you need to know about troubleshooting.
Now, how to reboot your Ring Video Doorbell? Here are the steps to help you with resetting your Ring Video Doorbell:
- Firstly, take off your Ring doorbell from its mounting, work with a screwdriver to screw out the screws. You can use Screwdriver-Torx and that is highly recommended.
- Open your Ring App on your phone.
- Navigate to the Devices, and then pick the device.
- Tap on the Device Health, then click on Change Wi-Fi.
- Now, theres an orange button present on the back of your Ring doorbell. Press it.
- Firstly connect your Ring Wi-Fi and phone, then connect your Home Wi-fi and Ring device through your phone.
Thats it, youve reset your Ring doorbell Wi-fi and connected it to your current Wi-Fi.
In this read, youll get to know about other Wi-Fi errors and how you can resolve all of them. So, lets dig in further to discuss more troubleshooting tips that will save you from facing any such issues in the future.
Recommended Reading: How Do I Change My Optimum Wifi Password
Scenario #: Rebooting A Combined Modem And Router
If youre trying to reboot a combined router/modem device, the steps will differ slightly from the ones above. To manually reboot a combined modem and router, you should follow the steps below.
How To Check Your Connections
Frequent disconnections on a specific device may occur if your connection to the modem has been compromised by a faulty cable, or weak wireless signal.
If you are connecting to your modem directly :
If you are connecting to your modem through wireless internet:
Recommended Reading: Do Southwest Flights Have Wifi
What Does It Mean To Power Cycle Your Router & Modem
Power cycling your router has nothing to do with riding a stationary bicycle it really just means to reboot your router by disconnecting it from its power source, waiting 15 seconds, and then plugging back in.
Why wait 15 seconds? Despite a router or modem being unplugged from the power source, its important to wait as some electricity could still briefly remain in the capacitors of the power supply.
Option : Use The Web Interface
Most standalone routers and wireless gateways provide a backend interface you can access using a web browser. Once you enter the username and password, you can reboot the device somewhere from within the settings.
However, the interface provided by each manufacturer is different, so our Linksys instructions might not match what you see on units supplied by other manufacturers.
Example: Reboot a Linksys router
Step 1: Open a web browser, and enter the routers web or IP address. Linksys prints the web address on a label stuck to the bottom of its routers.
Step 2: Enter the username and password to log in.
Step 3: Click Troubleshooting listed under Router Settings displayed on the left.
Step 4: Click the Diagnostics tab.
Step 5: Click the Restart Router link displayed under Restart.
Recommended Reading: Sony Bravia Tv Wifi
Can You Block Yourself After Accessing Someones Wifi
This is unlikely If you have no access to the admins username and password.
To block a person or yourself from a WiFi network, you will need to log into the WiFi routers web interface with the Admin/Guest password and then proceed to block a device.
If this option doesnt seem viable for you, discontinuing any connection you have with the WiFi network is just as good as blocking yourself.
Are You Likely To Be Blocked Again After Unblocking Yourself From Someones Wifi
Yes, you can be blocked again even if you just succeeded in unblocking or circumventing someones WiFi network.
Changing your MAC address wouldnt make you invisible on the administrator routers web interface. Changing your MAC address only allows you to impersonate another network device it doesnt make you invisible to the eyes of the WiFi owner.
The WiFi administrator will likely see another network device on the web interface and block it without knowing its you.
If you are using the MAC address of someone not restricted from the WiFi network, be careful as accessing the same network at the same time could leave some confusion and problems to yourself and the original owner of the MAC address.
If investigated, you could be blocked again. Theres no end to the blocking and unblocking game. As it is impossible to hide your connection to the WiFi router from the router, you will always be noticed and blocked.
You May Like: How Do Portable Wifi Hotspots Work
How Do You Perform A Router Reset
Taking control of a malware domain is called sinkholing and this was clever work by the FBI. However, you may decide that you want to reset your router anyway. This should remove the last of the VPNFilter code from the device.
How you perform the reset varies by make and model. I strongly suggest you go the website of the router manufacturer and get the instructions from there, specific to your model. Exercise caution if you decide to Google the instructions for your device because there may be attempts to poison search results relating to this issue. You can restrict results to pages found on the manufacturers website by using the site parameter like this: Netgear WNDR3400 factory reset site:netgear.com.
What follows is a generic guide that you use at your own risk.
For many routers the reset operation is more than flipping a switch, it involves the classic paper clip poker and a small hole on the device. This may be referred to in the manufacturers documentation as Restore Factory Settings or something similar. It is often printed on the back of the device, along with the default values, like this:
To proceed with the reset, first make sure: