How To Set Up Chromecast To Wifi

How To Use Chromecast With An Ethernet Internet Connection

How To Set up Chromecast – Google Chromecast Setup – How To Use Cast Connect to Wifi & TV

An Ethernet connection is a good alternative for a weak WiFi connection. It can up your speeds and give you a smoother Chromecast experience. For this, you will need a Chromecast Ethernet adapter and Ethernet cable.

A chat with Google support confirmed that Google is only selling Ethernet adapters for Chromecast with Google TV, and one comes in the box with Chromecast Ultra. Having said that, an Amazon search picked up aftermarket alternatives for other Chromecast generations.

Mind you, as these are not official Chromecast adapters, theres always a chance they might not work with some models. If you want to give it a whirl, you can peruse Amazon to see all the available unofficial adapters and what they can do.

Follow these steps to use Chromecast with a wired internet connection instead of WiFi.

  • Plug the Adapter Into the USB port

    Make sure your Chromecast is plugged into your TVs HDMI port. Attach the Ethernet adapter cable to the port on the Chromecast where you usually put your mini USB cable.

  • Connect Your Ethernet Cable

    Choose an Ethernet cable long enough to reach your router with internet connection. Plug your Ethernet cable into the Chromecast Ethernet adapter.

  • Plug the Adapter Into the Power Outlet

    When everything is connected, simply plug your Ethernet adapter into the power outlet you usually use for your Chromecast device.

  • Change Chromecast Wifi Network

    When you change your Modem or Router, the new WiFi network on your Phone will not match with the WiFi network on Chromecast. Hence, it is more than likely that your iPhone or Android Phone wont be able to sense your Chromecast.

    Hence, the best option in this case is to Manually Reset Chromecast. This will wipe out the old WiFi network and settings on Chromecast, after which you can setup Chromecast to use the New WiFi Network.

    1. Make sure that Chromecast is plugged into the TV and Power supply.

    2. Next, Hold Down the Reset Button on your Chromecast for about 15 seconds.

    3. As you are Holding Down the Reset Button, you will see the light on Chromecast Flashing continuously. Release the Reset Button when the light stops flashing and stays Solid .

    4. Chromecast will Reboot and then Reset itself to Factory Default Settings.

    5. Now that your Chromecast has been Reset to Factory Default Settings, you can start Setting Up Chromecast to use the new WiFi Network using steps provided in this article: How to Setup Chromecast on Android and iPhone.

    Chromecast: Connect To Smartphone

    Once youre set up, your Chromecast will be connected to your smartphone. However, guest mode is available on Chromecast third-generation so your friends and family can use it. You dont need to share your WiFi password with anyone to do this. Unfortunately, Chromecast with Google TV doesnt support guest mode.

    Don’t Miss: Will Blink Cameras Work Without Wifi

    Do I Need To Connect My Chromecast Device To An Android Phone

    Chromecast is designed to work with mobile devices. For this reason you need one to cast from unless youre using Chromecast with Google TV. This can be either an Android or iOS device. As mentioned, Chromecast with Google TV doesnt require a mobile device to stream content, though it is still recommended to use a mobile phone to set it up, and it is a hard requirement for other Chromecast models.

    You cannot set up your Chromecast device with a PC as it is no longer supported, but you can cast from your PC in the Google Chrome browser.

    How To Cast Videos And Music To Your Chromecast

    How To Set Up Chromecast Using Android, iOS, And PC?


    There are two ways to use the Chromecast. You can cast from a mobile device and you can cast from your computer from Chrome. If you want the full run down on the desktop casting option, check out our guide to Chromecast mirroring here. Although the desktop casting function has its uses, the mobile casting experience is far more polished and certainly the source of the Chromecasts popularity.

    To take advantage of Chromecasts easy casting, you just need to grab an app that has casting built insuch as YouTube, Netflix, or Pandora. Once youve loaded an app with Chromecast compatibility, playback is as easy as can be .

    Just open a video and click the Chromecast logo, seen below in the upper right-hand corner of the screenshot. The mobile app youre using will automatically kick the stream over to the Chromecast and the stream will begin playback.

    The extra nice thing about the Chromecast is that all the unpacking/decompression of the video stream is handled by the Chromecast itself , so even if your device is old, battered, and sporting a slow processor, you can still use the Chromecast with ease. A such, old Android and iOS devices make for great Chromecast remote controls you can leave plugged in next to the couch in the living room.

    Thats all there is to setting up your Chromecast. Once you have it installed, youve poked around the app for a minute or two, and youve got a handle on the very simple click-the-icon casting functionality its all smooth sailing.

    You May Like: How To Reset Blink Sync Module

    How Do I Connect The Chromecast To A New Wifi Network

    To change your WiFi network or switch to the Chromecast, youll need the Google Home app, which you can download from the Play Store and App Store.

    Step 1: Connect the Chromecast to your TV and make sure the Google Home app is installed on your device and connected to the same WiFi network as the Chromecast.

    Step 2: Launch the Google Home app and select your Chromecast device.

    Step 3: Now click on the Settings icon in the top right corner of the screen.

    Step 4: Scroll to the bottom of the menu and select WiFi.

    Step 5: A new pop-up window will appear on the screen. Select Forgotten Network.

    Step 6: Now click on the + symbol in the top right corner of the screen.

    Step 7: Select Configure Device.

    Step 8: Select Set up new devices in the home.

    Step 9: Select your profile and click Next.

    Step 10: Wait for the Google Home app to recognize your Chromecast.

    Step 11: Once detected, press Yes.

    Step 12: The alphanumeric code is displayed both in the Google Home app and on the TV connected to Chromecast.

    Step 13: Press Yes if the codes match.

    Step 14: On the next screen, click Yes, Im in if you want to share your device statistics with Google. Or click on No, thank you.

    Step 15: Select the new WiFi network and click Next.

    Step 16: If you want the Chromecast to automatically accept the device password, press OK. Click Manual Entry if you want to enter the WiFi password manually.

    Step 17: If you chose the manual option, enter the password on the next screen and click Connect.

    Press The Reset Button

    To manually reset your Chromecast, youll need to press and hold down the rest button. Youll find the reset button next to the micro-USB port in your device. You will need to hold the button down till the color of the LED light turns from flashy orange to white. First-generation Chromecast users, on the other hand, will find the reset button at the back of their device. Follow the same pressing technique until the flashing LED light goes blank.

    Recommended Reading: Does Dunkin Have Wifi

    Tune Multicast Data Rates

    Multicast applications, such as Chromecast, require special consideration when being deployed over a wireless network because a multicast in 802.11 is sent out as a broadcast so that all clients can hear it. The actual data rate used by the AP in order to transmit the Chromecast frames is the highest mandatory rate configured within that band. For 2.4 GHz, the default rate is 11 Mbps.

    In order to optimize the delivery of these frames, it is important to tune the 802.11 data rates within the controller to allow multicast to be delivered at the highest rate that the coverage model of the network can support. For networks with a low density of APs, it may be necessary to keep the data rates at the default. For a network that does not have any requirement to support 802.11b clients, tuning the data rate to 12 Mbps mandatory and lower rates disabled will help to reduce multicast airtime utilization. This is configured under the Wireless tab and the 802.11b/g/n > Network menu.

    How To Change Wifi On Chromecast

    How to setup Chromecast on your TV using Mobile WIFI

    Tochange your WiFi network on a Chromecast, start the TV and open the Google Homeapp. Then select your device and tap the gear icon in the top-right corner ofyour screen. Finally, tap WiFi> Forget this Network.

    Note: Before you start, make sure your smartphone or other device is connected to the same network as the Chromecast. If you cant connect to the same network, youll have to manually reset your Chromecast. You can find out how to reset your Chromecast in the instructions below.

  • Turn on the TV and plug in your Chromecast. You can tell the Chromecast is turned on if you can see a light on the device.
  • Open the Google Home app. You can find this app on the Apple App Store and the for free.
  • On your device, select your Chromecast. This will have the name that you gave it during the setup process. This might be something like Living Room TV.
  • Then tap the gear icon in the top-right corner of your screen.
  • Next, select WiFi.
  • Then tap Forget this Network.
  • Once you forget your Chromecasts WiFi network, you can change it by setting up your device again. If you want to find out how to set up your Chromecast, check out the instructions below.
  • If you are connecting to a new WiFi network, you might not be able to connect to your Chromecast. If this is the case, you will have to manually reset your Chromecast. Then you can connect it to the new network by setting it up again.

    Don’t Miss: Does Southwest Have Wifi

    How To Set Up Your Chromecast

  • Open the Google Home app and tap the plus sign in the top-left corner of your phones screen.
  • Then select Set up device.
  • Next, select Set up new devices.
  • Then choose or create a home and tap Next.
  • Wait for the app to discover the device and tap Next.
  • Then wait for the app to connect to the device.
  • Next, tap Yes to confirm that you see the code on your TV. If you dont see the same code, tap No, and then tap Scan for devices.
  • Follow the onscreen instructions until you see the page that says, Connect to Wi-Fi. Here is where you will choose a new WiFi network to connect to. You might be asked to enter the WiFi password at this point.
  • Wait for your device to connect to your WiFi network.
  • Once you see a screen that says, Linking your Chromecast, you can hit continue, or click the X in the top-left corner to start using your device.
  • How To Change Wifi Network By Manually Resetting Your Chromecast

    Tomanually reset your Chromecast, press and hold down the reset button on theside of the device. Then disconnect and reconnect the USB power cable to yourChromecast.

  • Press and hold down the reset button. The reset button is located on the side of your Chromecast, next to the micro-USB port. Press this button until the LED light stops flashing orange and starts flashing white. If youre using a first-generation Chromecast, you can find the reset button at the back of your device. Press and hold down the button until the light on your streaming device stops flashing.
  • Disconnect the USB power cable. Then wait for a few seconds.
  • Reconnect the USB power cable. This will reset the device to factory conditions.
  • Once you reset your Chromecast, you will have to set up your device again.
  • You May Like: Blink Sync Module Solid Blue Light Only

    Reboot The Following Devices:

  • Wi-Fi router

  • Unplug the power source for ~1 minute before plugging back in
  • Note: If you’re unable to set up using the Netgear Nighthawk router, then you may need to:
  • Disable Access Control
  • Enable the option “Allow guests to see each other and access my local network” in the “Guest Network Setup”
  • Chromecast device
  • Disconnect the power cable from the Chromecast device
  • Reconnect power cable back into the Chromecast device
  • How To Change Your Chromecast To A New Wi

    How to set up chromecast to new wifi

    JordanRead more November 17, 2021

    Device Links

    Various casting devices allow you to stream media files from mobile phones and tablets to your TV or PC, but Google Chromecast is one of the most portable devices. You can take it everywhere, but theres a small catchit can only remember one Wi-Fi network at a time.

    If you take your Chromecast with you or have more than one Wi-Fi source inside the home, youll need to regularly change its Wi-Fi. Depending on the reason for the change, the process can be straightforward or a bit tricky.

    Read Also: Southwest Flights Wifi

    How To Get Sound From A Chromecast To External Speakers

    You do have a few options for getting sound from a Chromecast if your projector doesnt come with internal speakers. Some are a little easier than others, and the one that works will depend on your setup, along with the connected components. There are three main ways of going about it which we explore down below:

    Set Up Chromecast Or Chromecast Ultra

  • Plug in Chromecast.
  • Download the on your Chromecast-supported iOS device.
  • Turn on Bluetooth.
  • If you already have Bluetooth turned on, you can skip to the next step.
  • Highly recommended: if you dont have Bluetooth turned on, the Google Home app will ask you to turn on Bluetooth to help improve the setup process. Depending on your iOS device, you can swipe up or swipe down from the top or bottom of your Home screen to turn on Bluetooth.
  • If you don’t want to turn on Bluetooth for setup,
  • Tap No Thanks.
  • Tap your iPhone’s Home button tap the Settings app
  • Also Check: Spectrum Network Extender

    How To Connect Chromecast To Wifi Network

    The next step is to set up your device to connect to the Internet. This allows you to stream any content from your phone or computer to the TV. If you want to connect your Chromecast streaming device to a WiFi network, you have to follow these steps:

    • First of all, open the Google Home App and select Add Device
    • Then, add the Chromecast streaming device to the app
    • Go to Settings and tap your Chromecast streaming device
    • Select the WiFi option from the list of available wireless networks
    • Choose the WiFi network you want to connect your device with
    • Finally, enter the password and connect.

    Once youve connected your device to Wi-Fi, you can stream movies, watch and play video games, and stream all sorts of content to your TV.

    You should also be aware that purchasing a Google Chromecast set-top box does not give the user access to streaming platforms. You need to sign in to the streaming service with your own account. Some resources provide some content for free, while others immediately ask for a paid subscription. But it is not included in the price of Chromecast.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox