How To Setup A Brother Printer To Wifi

Connect The Ipad And Printer

Connect Brother printer to wifi – wireless tutorial

From within the app on the iPad press and hold for 5-10 seconds at the top middle of the welcome screen. Select the Printer Settings option from within the menu and enter your password when prompted. The iPad will search for and allow you to connect directly with the printer on your network if it finds one.

If your iPad does not find your printer you may still be able to get the iPad to connect by manually supplying the IP address. To get the IP address on the 820NWB printer:

  • Press the Menu button and the down arrow button to go to WLAN settings.

  • Press the Up arrow button to go to WLAN Status and press the OK button.

  • Select Infrastructure Mode and press OK.

  • The IP address will be listed there, usually as a couple of sets of numbers separated by periods. AKA 123.123.1234.123

You can then press the “MANUAL SETUP” button with the app on the iPad to manually specify the IP address of the printer.

Select the printer and press the “TEST PRINT” button to ensure the iPad can successfully communicate with the printer. There are a couple of issues that can appear at this step:

Once you have a successful test print, hit the “< ” button in the top left corner and you can exit the screen using the “X” in the upper left. Your changes will save automatically.

How To Connect Brother Wireless Printer To Mac

Brother official channel

Go through these easy steps to connect your Brother wireless printer to MAC-

  • First of all, turn on your Mac and download & install the printer driver from Brothers website.
  • Then, turn on your Brother printer and put it on same WiFi network as with your Mac .
  • Thereafter, open the Apple Menu and Press on the System and Preference option.
  • Then, hit on Printer and Scanner.
  • Now, under this option you will be able to see your Brother printer with a green mark.
  • Incase, if you dont see your Brother printer, click on + sign. Now from the opened pop up window, select your Brother printer and click on Add.
  • So by using these steps you can easily connect your Brother Wireless Printer on Mac Machine.

Here, this detailed article about How to connect Brother printer to WiFi might be useful to fix your printer problems. By following these steps correctly, you will be able to successfully connect your printer to both Windows and Mac device. For any further help, you can reach us through chat or our toll-free number.


Brother Wireless Printer Setup On Mac And Windows 10

  • Turn on your Brother printer and press the menu button from the Control Panel.
  • Using the Up or Down arrow keys select the network, press Ok, select WLAN, and press OK again.
  • Using the same keys you have to select the Setup Wizard option and press OK.
  • Select Yes when when the setup wizard prompts you if you wish to enable WLAN.
  • When you do so, the wireless setup will begin.
  • The list of available networks will display on your screen.
  • Using the Up or Down keys, select your network and press OK.
  • Next, enter the network password and select Yes/Ok to apply the settings.
  • If your network is not encrypted, then select none in the password field.
  • Now, your Brother machine will connect to your network and print the wireless report.
  • If you are unable to establish a connection between your printer and the wifi router, then you get instant assistance from Brother Printer Support representatives.

    Also Check: How To Connect Canon Mx492 Printer To Wifi

    How To Do Brother Printer Wifi Setup

    Once the printer gets connected to the wifi network, the wifi indicator light on the printer will turn a solid blue color. Here we come to the end of the discussion about explaining the various possible ways to manage your query how to do brother printer wifi setup?

    We sincerely hope you could be able to set up your printer to wifi network by following any of these given methods. For any further assistance, you can contact experts.

    Disclaimer: Printer Offline Tech, is a third-party service provider and have no affiliation or relation with the brand or service. Any image or content used in the post is only for representation and information purposes and we do not have any right or authority over it. How are you using this information is solely your responsibility and we shall not be held accountable for the same.

    How Do I Connect My Brother Printer To Wifi Via Control Panel

    How to Setup Brother Wireless Printer

    Let us learn how to connect printer to wifi Brother with the help of the Control Panel. This method is quite simple to understand and can be performed in just 9 steps.

    1. On your Brother printer, go to the Control Panel.

    2. Press the Mouse button.

    3. Next, select All settings.

    4. Then navigate to Network and hit Ok.

    5. Now, go to Network reset and tap Ok.

    6. For yes, press 1. For confirming the same, press 1 again. Then your Brother printer will begin to reboot.

    7. You will be asked to set up the wifi once your printer has been rebooted. Hit Ok thrice to see the Setup Wizard.

    8. From the list of wifi networks available, choose the one that is yours and fill in the Wifi password.

    9. Now, tap Ok and then hit 1 for applying these settings.

    That is all! Once you have performed the above-mentioned steps correctly, your Brother will be connected to the wifi and you will receive the printed connection report.

    Recommended Reading: Troubleshooting Blink Sync Module

    Brother Printer Wifi Setup Required

    You can get Brother printer WiFi setup via Wireless Direct. Wireless Direct gives you the privilege of connecting the printer directly to your PC or mobile device without a Wi-Fi hotspot/router where the printer acts as a Wi-Fi hotspot.

    1. Begin by verifying the Wireless Direct Printer settings. Use a Windows PC or Mac to confirm the settings when connecting to a mobile device

    For Windows computer. Continue connecting the printer computer with the USB cable. Launch the Printer Settings Tool on your computer Click the “Communication Settings” button. Now confirm whether Wireless Direct is selected for the selected interface in the General tab.

    2. Now press and hold your printer button for a second to turn on the Wi-Fi function.

    3. If the Wi-Fi function is on, the Wi-Fi indicator starts blinking every three seconds.

    4. You can use your PC or mobile device to select your printer’s SSID. Enter a password.

    5. The indicator turns blue when a connection is established.

    How To Set Up My Brother Printer Wirelessly

    Before you know how do I set up WiFi on my Brother Printer, first follow the above-given steps to connect your printer. After completing these steps, proceed with the Brother Printer WiFi setup. You will also be asked to enter the security key or password to connect your printer to WiFi. Above is mentioned how do I enter my WiFi password on my Brother Printer, take help from there. Follow the below steps to complete the Brother Printer wireless setup.

    • After completing the connection, you need to install Brother Printer software to complete the setup.
    • Windows users, go to the Brother Printers official website and look for the downloads section. From here, download Full driver & Software package after this, follow the on-screen instructions and complete the process.
    • Mac users, go to the Brother Printers official website and look for the downloads section. From here, download the Full driver & Software package. After this, follow the on-screen instructions and complete the process.
    • Go as instructed otherwise, you may face some issues while using the machine.

    This is how do I setup my Brother internet connect completely with drivers and software. Follow this complete method for the Brother Printer WiFi setup.

    You May Like: How To Improve Wifi Signal In Basement

    How To Connect Brother Printer To Wifi Mac

    Connect the network cable to the brother machine and the hub.Connect the printer and computer with a usb cable.Connect the printer to the computer with a usb cable.Connect the printer to the mac using the usb cable that came with the printer.

    Depending on the model of yo.Disconnect the usb cable from theprinter and mac.Download any new software the printer requests and install it.Ensure that next to kind it has brother cups.

    Enter your wireless password using the displayed keypad.I see that clint gave a good answer.If an interface cable is connected, unplug it too.If needed, access the printer settings from the gear on the bottom right.

    If the correct brother model with cups is.If the printer doesnt appear, click the.If the printer is on the network, make sure your mac and the printer are still on the same network, the printer is turned on,.If your printer has an ethernet port, connect your printer to one of your base stations ethernet ports.

    If your printer is connected to your mac, make sure the printer cable is firmly connected and the printer is plugged into an electrical outlet and turned on.In most cases, you can check a person in, and itll automatically connect to a printer.In the tab, set to .Install the mac software that came with the printer, and make sure that it includes a printer setup assistant.

    Brother Printer Not Connecting To Wifi On Mac

    Brother MFC-J497DW Printer – How to setup the Wi-Fi

    Are you facing the same problem of Brother Printer not connecting to wifi on mac devices? Dont worry, you just need to follow the below-mentioned steps carefully and you will be able to establish a wifi connection between your Brother printer and mac device.

    • Firstly, connect the Mac device and the Brother Printer through a USB cable. Go to the printer setting tool option on your Mac device and check if the option of Wireless direct is set to on.
    • You need to press and hold the printers wifi button for one second to let the function of wifi turn on.
    • You will notice that the wifi indicator light will start to flash in blue color after every three-seconds gap.
    • Select the SSID of the printer through your Mac device.
    • In the end, the wifi indicator light will turn into a stable blue color when the wifi is connected.

    Once you are through with these steps, you will be able to Connect Brother Printer to WiFi successfully through your Mac device. You can use the same above-mentioned solutions to connect Brother HL 2270DW Printer, Brother MFC l2700DW Printer, Brother HL l2340DW Printer, and Brother HL l2360DW Printer to Wifi. However, to make sure that the process of Brother printer WiFi setup is complete, do not forget to download Brother printer driver software.

    Why choose us to Connect Brother Printer to Wifi?

    FAQs Related to Connect Brother Printer to Wifi?

    Recommended Reading: Best Wifi Extenders For Spectrum

    Set Up A Brother Machine On A Wireless Network

    When you have located the wireless network settings of your wireless router or access point, set up your Brother machine as described in the setup video below.

    *The video clip is being streamed from YouTube.
    How to use the buttons:
    Start the video
    Stop the video
    Restart the video
    • The product or components, such as the power cord, shown in this video may differ from the ones that you are using.
    • Video contents may change without prior notice.
    • You can change the size of the captions that are shown in the YouTube video by clicking

    To set up your Brother machine on a wireless network:

  • Connect the power cord to your Brother machine and then connect it to an electrical socket. Turn your Brother machine on.
  • Press Menu button on the machine’s control panel.
  • Press the Up or Down arrow key to select Network and press OK.
  • Press the Up or Down arrow key to select WLAN and press OK.
  • Press the Up or Down arrow key to select Setup Wizard and press OK.
  • When WLAN Enable? appears, select Yes to enable the wireless network. This will start the wireless setup wizard.
  • The machine will search for your network and display a list of available Network Names . When a list of SSIDs appears, press the Up or Down arrow keys to select the SSID you wrote down earlier, and then press OK.
  • Do one of the following:
  • If using an authentication and encryption method that requires the Network Key Enter the Network Key, then press OK to apply your settings. Select Yes to apply the settings.
  • How To Connect Your Brother Mfc 9340cdw To Wifi:

    1. Press WiFi icon.

    This icon should appear on the upper right hand corner of your touch screen. If you have this icon, press it and move to step 6.

    If you dont have this button, skip this step and move on to step 2.

    2. Press Settings icon.

    This is the tool icon on the upper right hand corner of your touch screen.

    3. Click All Settings.

    7. Press Yes when Enable WLAN? is displayed on the touch screen.

    8. Choose Network Name .

    Your machine will display a list of available network names in your area. If your network name is not displaying, check your wireless router/ access point to see if it is turned on and connected. If so, you may need to move your machine closer to the wireless router/ access point.

    9. You now have the following options:

    a. Enter Network Key. Enter the Network Key of your wireless router/access point using the touch screen. Once you have entered your Network Key, press OK and then press Yes to apply the settings. Move to step 10.

    b. No Network Key needed. If your Network Name is not encrypted with a password, you may skip this step and go to step 10.

    c. WPS route. If your wireless router/ access point supports the WPS, press Yes when the machine asks if you would like to WPS. When the machine instructs you to begin WPS, press the WPS button on your wireless router/ access point. Then press Next using the touch screen.

    10. Connect to WiFi.

    Read Also: Does Dunkin Donuts Have Free Wifi

    Connect Brother Printer On Windows Computer With Usb:

    If you want to connect Brother printer to Windows computer with wired connection, follow the below steps-

    • First, connect your Brother printer with your Windows computer through the USB which came along with your printer.
    • Then, download driver from Brothers website and finish the installation setup process as explained in the above section
    • Lastly, add your printer from control panel and your Brother printer will be connected to your computer.

    Use The Wps Option To Connect Wi

    How to Set up Brother Printer MFC
    • You may use the WPS button if you dont seem to remember the credentials or password or are having trouble with it.
    • Similarly, press the WPS button of your printer for 2 minutes to check the availability of the network.
    • As soon as the green light appears, it indicates that the connection is successful.

    For HP printer check out our article on How to Find WPS Pin On HP Printer

    You May Like: How To Sync Blink Camera To Wifi

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox