How To Setup Belkin Wifi Extender

How Do I Connect My Belkin Wifi Extender To A New Wifi

Reset And Connect To Belkin F9K1015 Wifi Range Extender

During the time it is turned on, simply press the range extenders reset button at least ten seconds. Set the range extender back to its usual position after it has turned on again. Connect your Belkin-compatible device while still holding it in your hand. It is important that you first set up your network before moving on.

Wps Pin Method To Setup Belkin Extender

See If your device supports it, youll typically find this PIN either on the product label usually on the back or bottom of the router itself or within your routers configuration utility.Since it varies based on manufacturer and model, refer to your products documentation for more information.

  • Launch the Web browser on your computer or mobile device and navigate to http://belkin.range
  • Now Click Wi-Fi Protected under Extended Network Settings, Then enter your devices WPS PIN in the Enter Client Device PIN field.
  • Please Click Enroll to complete the configuration.

we hope this will help you out to configure your Belkin range extender. there is One More Method One Can Use to Configure Belkin Extender If Wireless Method Fails to Work

Discover The Key Steps In Belkin Range Extender Setup Process

Find answers to frequently asked questions on belkin.range

Belkin.Range extenders are devices that act as repeaters for the routers wireless signals. They can be set up even without using ethernet cables, wirelessly. This website will tell you all you need to know about the Belkin range extender setup and login.

Also Check: How To Change Wifi On Blink Mini Camera

S For Belkin Range Setup

The steps for any router setup are very easy. The only thing you need to take care of is that you should follow each and every step carefully without missing a single thing. Only then, your Belkin setup would be successful. Therefore, lets follow every step one by one. In this guide, the Belkin range setup has been explained for the dual bands using http belkin range to start the setup wizard. In case, you were doing the Belkin extender setup for the single bandwidth, then you have to cancel out the one bandwidth.

  • Step 10: In case, the option is open to entering the password for the network, then enter the default ones that have been described over the box.Note: If you forget the Belkin range extender login details, you have to perform a Belkin range extender reset to recover it.
  • Step 11: Click on the Next button, and wait for some time, so that network could authenticate the password.
  • Step 12: In case, you are selecting the dual-band, then you need to select the second wireless network, as the bandwidth is mentioned along with the name, and follow the same procedure from Step 8. Otherwise, skip this step.Note: If the orange light on Belkin extender starts blinking it means your device is configured properly.

How To Setup A Belkin Range Extender

Belkin N300 WiFi Extender

JamieRead moreJune 13, 2018

Need help getting a wireless signal into hard to reach places? Need a signal boost in a bedroom or basement? You could use a range extender. It is cheaper than a router and can boost WiFi signals across a property. One of the most popular WiFi extenders at the moment is the N300 made by Belkin. I own one of these and have found it helps spread the signal further in my home.

If you need help setting up a Belkin range extender, this is the tutorial for you. It isnt sponsored by Belkin and we dont receive any money for this post. I own one and it is a best-seller so is ripe for a tutorial on how to use it.

If you live in a large house or one with thick walls you may find getting a good WiFi signal a problem. My house was built in 1913 and has thick stone walls, so I feel your pain. One way around it is to use a wireless extender to boost the signal into those hard to reach places.

The Belkin N300 is cheap, easy to use and just sits there doing nothing but boosting your wireless signal.

Read Also: Can You Have 2 Routers In Your House

How Do I Reset My N300 Wifi Range Extender

Press and hold the Factory Reset button on top of the extender for at least five seconds until the LED on the top blinks amber, as shown in the accompanying picture. When the extender has started to regenerate, flip the Factory Reset button back on. As soon as the extender resets, it returns to its factory settings.

Belkinrange Network Setup Process

  • Always place your extender just near the router during installation. Later you can place it anywhere within the range of Router for your suitability .
  • Firstly, plug in the Belkin extender to the power outlet near the router and make sure the power is On.
  • Secondly, navigate to your phone or computer, scan for the networks and choose the Belkin Extender Network sign with the name Belkin.setup from the Wifi Network List.
  • Now, connect to the belkin.range network with the wireless password.
  • If Belkin range Setup does not open, open your pc Browser and write http://belkin.range in the address bar.
  • On the Belkin extender login page, enter the admin username and password.
  • Next, you can select the name of your existing Network and can make Connection With it. Please use the same password with which you used to Connect existing Router.
  • Once it is Connected with belkin extender login, check the Information and go ahead in making changes for the Networks name & Password.
  • Now, save all the changes made in the settings and then restart your belkin range Extender setup. Finally the work is done and we can get the belkin extender functioning according to our needs.
  • Don’t Miss: Finding My Wifi Password Mac

    Log Into The Wireless Range Extender To Configure It And Continue With Belkin Wifi Extender Setup

    Then, go to your computer or mobile device and scan for the Belkin.setup wireless network. We found it on our iPad Air, as pictured next. This access point is only active during the setup process, and will disappear once youve finished configuring the F9K1106v1.

    Next, join the Belkin.setup network. Since it is OPEN, you will not be prompted for a password. On the iPad Air, we join it simply by single-tapping it.

    Once connected, the Belkin.range front page comes up automatically, your computer assumes the default IP address of the range extender , as shown next. If the setup start screen does not appear, then direct your web browser to http://belkin.range/

    Tap the Get Started button on the http://belkin.range page. This instructs the extender to scan both the 2.4 and 5 Ghz. bands for eligible wireless networks to extend and repeat. After a short pause, your browser displays the Choose the wireless network youd like to extend screen, as pictured in the next step.

    Setting Up A Belkin Range Extender

    Reset and Connect to Belkin N300 Wifi Extender on Mac OSX

    The setup process for a Belkin range extender is actually very straightforward. Once unboxed, plug it into an outlet close to your wireless router and we go from there. You will need a phone or tablet to complete setup but you can use a computer if it has WiFi.

    You can use WPS if you like but I have never had success with it. I much prefer this method.

  • Use your device to access a wireless network called Belkin.setup.
  • Open a browser on the device and navigate to . If that doesnt work, try You should see a Belkin setup page appear.
  • Select the blue Get Started button on the page. The web service will search for available wireless networks and list them.
  • Select the network you want to extend and select Next.
  • The range extender should connect to the network and require the password to join it. Type in the password and select Next.
  • Check the details of the network in the summary page and select Create Extended Network if correct. Select Edit if anything is wrong.
  • If you have a dual-band wireless network and want to extend both bands, repeat Step 4 and 5 for both the 2.5GHz and 5GHz bands. Then select Next once both bands have been added and complete the process.

    If you prefer to use WPS, you can.

  • Plug the Belkin range extender into an outlet and wait for it to power on.
  • Press the WPS button on the top until the small light next to it flashes.
  • Press the WPS button on your wireless router to initiate the handshake.
  • Don’t Miss: What Wifi Extenders Work With Spectrum

    Requirements For The Belkinrange Setup

    Before you begin with setting up your http Belkin range extender, here are some important things you should know.

    • Make sure you have access to the main routers SSID and password for both the network bands in case you are using a dual-band router.
    • You have your range extender with you
    • A pair of Ethernet cables with you
    • You either have a smartphone or a computer system

    Last but not the least, it is important that you figure out the best location for installing your range extender. You can do it by using the signals on the LED of the extender. While the green color signifies excellent coverage, yellow/ amber color will tell that the coverage is average, and the red color says that you need to move the device closer to the main router.

    Also, make sure the location you choose is free from interference from other electronic appliances like microwaves, TVs, refrigerator, cordless phones, etc. If you need help with determining the perfect location for your range extender, you can always reach out to the experts at our end and theyll help you with the same.

    Why Cant I Connect To Belkin Setup

    Having trouble using the Belkin Setup to communicate with your range extender during the installation process should be rectified. Your range extender must now be powered on before it can connect to the Belkin Setup. you are still having difficulty connecting, consider resetting your extender. After holding the range extenders reset button for at least 10 seconds, release it.

    Read Also: Does Netgear Wifi Extender Work With Spectrum

    Check Your Extended Networks Info

    Note that weve covered our entered passwords with pink paint, to keep them secure. Check the presented net data one final time, just to make sure all is right.

    You may choose to edit this data by pressing the Edit button and then, following the instructions.

    Or, you can choose to completely scrap all the information entered in this entire procedure, by tapping the Start Over button, and then jumping back to step 2 to re enter everything.

    However, if the 2.4 Ghz. and 5 Ghz. network information displayed in the Extended Network information screen looks okay, then tap the Create Extended Networks button. This brings the new wireless networks on the air, and takes you to the final screen in this Wi-Fi range extender setup.

    Keep These Things Ready

    BELKIN F9K1015 WiFi Range Extender

    Before you start the Belkin range extender Setup, there are certain things that you must complete as pre-requisites as it would help you out at the later stage of the Belkin setup. Therefore, you must keep the following things ready with you!

    • WiFi Range Extender
    • Network SSID and Password for the existing WiFi router
    • Uninterrupted network
    • Wireless Network enabled system
    • If you are having a dual-band network, then you should have the network SSIDs, and passwords for both 2.4GHz, and 5 GHz.

    So, you must have these things ready in hand so that you can complete the Belkin setup in no time, or truly say, just in a few minutes. Now, if you are ready with all those things, you can continue with the Belkin range extender Setup steps discussed in the next section.

    Read Also: Can You Have 2 Wifi Networks In One House

    Plaats De Belkin Range Extender

    De configuratie die u zojuist hebt voltooid, is nu naar de firmware van de extender geschreven. U moet nu de extender op de juiste manier plaatsen om er het beste uit te halen. Waar u het precies plaatst, hangt af van waar u het signaal moet versterken. Voor mij heeft de eerste verdieping van mijn huis een zwak signaal, dus ik wil de hele verdieping een boost geven. Ik plaats mijn extender op de eerste verdieping onder mijn draadloze router.

    Het idee is om de extender op zijn minst halverwege tussen uw draadloze router en waar het signaal vervaagt. De extender heeft een sterk signaal nodig om het te kunnen versterken, maar je wilt ook dat signaal zo ver als je nodig hebt stimuleren. Het kan een beetje experimenteren om het in de exacte positie te krijgen.

    Zodra u weet waar u het moet doen, haalt u de stekker uit het stopcontact in de buurt van uw router en steekt u deze in het stopcontact dat u hebt geselecteerd. Als het eenmaal is ingeschakeld, ziet u een geel en vervolgens een blauw licht. Het blauwe licht betekent een goede vergrendeling op het netwerk en dat het signaal wordt versterkt. Breng je mobiele apparaat naar het gebied met laag signaal en test het om het zeker te weten.

    Use Smartphone To Install Wifi Range Extender

    • Plug the wireless range extender into a power outlet.
    • Use your mobile device or computer to browse the available networks and select the Belkin setup from the list.

    in any case if the Belkin.setup wont show up on your computer please refresh the available network list again. You can also troubleshoot Belkin range extender if there is an issue with installation.

    Launch Your Web browser and navigate to http://Belkin.range

    • Just click Get Started on Belkins setup Web page.
    • Now select your homes WiFi name from the list of available networks.
    • Enter your WiFi networks password when prompted and select next.
    • Select your WiFi network once again, click Next, and then click Create Extended Network.
    • You can set up a new username and password for your range extender as you wish.

    Also Check: Mac How To Show Wifi Password

    Enter The Password For Your 24 Ghz Network

    Type in the password for the primary 2.4 Ghz. network youre extending.

    Warning: Again, make sure you enter the correct password here, before pressing Next, lest you have to press RESET and start all over.

    As with the 5 Ghz. password entry, youll see the Checking the password screen, as pictured above. After a short delay, and assuming you entered the right password, youll receive the Extended Network information screen, as shown in the next step.

    Note that this extender does not support cross-connecting of extended and extension Wi-Fi networks. That is, you cannot extend a 2.4 Ghz. network with the 5 Ghz. extension SSID on this extender. The 2.4 Ghz. extension SSID can only be set up to repeat a 2.4 Ghz. primary wireless network. Also, the 5 Ghz. extension network can only re-broadcast a 5 Ghz. Wi-Fi network. Would be nice if you could cross wire the 2.4 and 5 Ghz. primary networks and extensions. However, such a feature might confuse novice users as well as network admins.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox