How To Setup Vpn On Home Wifi

Three: Change Your Dns

How to Setup VPN on Your Router (easy, step-by-step tutorial!)

Unless you have specified otherwise at some point in the past, your router most likely uses your ISPs DNS servers. If your goal in using the VPN is the protect your personal information and reveal as little about yourself to your ISP , then you want to change your DNS servers. If your DNS requests are still going to your ISP server at best nothing happens . At worst the DNS server can censor what you see or malicious log the requests you make.

To avoid that scenario, well change the DNS settings in DD-WRT to use large and public DNS servers instead of whatever our ISP defaults to. Before we jump into the setup , we want to highlight that while StrongVPN does offer an anonymous DNS service for approximately $4 a month, we dont recommend that particular service as strongly as we recommend their great VPN service.

It isnt that their DNS servers are bad , its that totally anonymous log-free DNS service is overkill for most people. A good VPN provider coupled with Googles speedy DNS services is just fine for anyone short of the extremely paranoid or those with serious concerns about an oppressive government.

To change your DNS servers navigate to Setup > Basic and scroll down to the Network Setup section.

You need to specify static DNS servers. Here are some well known and secure public DNS servers you can use as alternatives to your ISPs default servers.

Google DNS

209.244.0.4

When youre done make sure to click Save and then Apply Settings at the bottom.

Getting Started With A Vpn

Once you’ve settled on a service, the first thing to do is to download the company’s app. There’s usually a Downloads page for this on the VPN service’s website. Go ahead and download the apps for your mobile devices as well: You’ll want to protect as many of your devices as you can. If the VPN service you’re considering doesn’t offer an app for the devices you use, consider finding a different service.

We have found that when releasing VPNs for Mac, companies occasionally have different versions available in the Mac App Store and on the company website. This appears to be for compliance with restrictions imposed by Apple. Figuring out which will work for you can be tricky, so be sure to read the company’s documentation carefully.

Once you’ve installed the apps, you’re usually prompted to enter your login information. In most cases, this is the username and password you created when you signed up for the service. Some companies, such as IVPN, Mullvad, and ExpressVPN have unusual login systems that provide customers with more privacy but can be confusing at first. Be sure to read the instructions carefully.

Once you’re logged in, your VPN app usually connects to the VPN server closest to your current location. That’s done to provide better speeds when using the VPN, as performance degrades the farther the VPN server is from your actual location. That’s it: Your information is now being securely tunneled to the VPN server.

An Alternative Approach To Using Your Raspberry Pi With A Vpn

We started this article from the premise that your goal was to turn your Raspberry Pi into a VPN server. But now that weve gone through all the things you need to do to make that happen, you might want to consider a different approach. Instead of turning your Raspberry Pi into a VPN server, it might make more sense to use your Raspberry Pi as a computer, and connect it to a full-strength commercial VPN service.

Going this route would free up your Raspberry Pi for other projects, and provide faster speeds, more privacy, and better security for connecting to the internet at the same time. All three of our top VPN services provide VPN clients that can run on a Raspberry Pi, giving it the benefit of world-class online privacy and security.

All three of these services are fast and reliable, plus they offer 24/7 live chat support and a 30 day money back guarantee so you have plenty of time to test them out.

Recommended Reading: How To Check Your Wifi Speed

Visualizing The Setup Two

Below is a diagram of the home network structure were going to create. Traffic is encrypted by the VPN router, and flows through the primary router to the modem/internet. All devices connected to the #2 router will use the VPN tunnel. All devices connected to the #1 router will use your normal internet connection.

Heres how your network will look once youve set up a 2nd VPN router

Adding A Vpn Connection

Setting Up a Router VPN: The Ultimate Guide

Its time to add a VPN connection. First click on the button at the top that says Add a VPN connection.

A blue screen will appear. Here you can enter the details of your VPN provider. In some countries you can choose a VPN provider from a number of standard providers, but this step-by-step guide focuses only on the Windows option.

Give the VPN connection a recognizable name under Connection name. You could, for example, opt for VPN connection work if you only need it for work-related activities.

Under Server name or address, enter the IP address or server URL of the VPN server. This information is provided by the provider of the connection, e.g. your boss.

Under VPN type, choose the VPN protocol you wish to use. In most cases, youll be able to select the Automatic option here. For more information about VPN protocols, please read our article on this topic.

Under Type of sign-in info you can specify the way you wish to log in. In most cases, this involves using a user name and password. Alternatives include logging in with a smartcard or certificate.

Under User name and Password, fill in the necessary login details.

Note: it is safest not to make the computer remember your sign-in info if youre using a public computer. Only choose to save the data if your computer cant be used by strangers and is well protected!

Once youve finished entering all the necessary data, click Save.

Also Check: What Do I Need To Boost My Wifi Signal

Manually Flashing The Current Router

As in the second method, buying a VPN router can be expensive. But if you still need a VPN router without buying a new one, you can upgrade your current router by manually flashing it.

As flashing a router can be a tricky task, buy a pre-configured or pre-flashed router already flashed. But this option can be expensive.

First and foremost, toTo flash the router by yourself, you need to check if your router supports flash firmware like DD-WRT, OpenWRT, and Tomato. Then find out the instructions to follow on the firmware providers website.

  • Connect the computer to the Local Area Network
  • Log into your router by typing the router internal IP address in a web browser address bar
  • Find the router update or upgrade section in the settings panel
  • Follow the instructions from the firmware website and flash the router. This can involve resetting the router, uploading, and firmware and doing the upgrade.
  • Restart the router if required.
  • Log back into the router and enable OpenVPN.
  • Follow the detailed instructions to create the VPN server: For example, DD-WRT firmware describes the server and client setup instructions. Adjust firewall configurations to let OpenVPN know where to direct incoming traffic from clients.
  • Setup certificate authority
  • Generate Server certificate and keys
  • Generate and configure Client certificate and keys
  • Import Client certificate and keys to client devices
  • Connect the client machines to the VPN server
  • Vpn Routers: The Easier Alternative

    As the name suggests, a VPN router is a router that automatically connects you to a VPN from any device in your home or office that is served by this router. A growing number of manufacturers offer routers that come with a VPN pre-installed on them.

    Yes, this might mean spending money on a new router if your homes existing version doesnt come with VPN protection. But ask yourself if you are tech-savvy enough to install VPN on your existing router. If you have doubts, its probably better to shop for a router that comes with this protection already built in.

    Recommended Reading: How To Check Wifi Speed On Phone

    How To Set Up A Vpn On Your Router

    The first thing you need to do is select a VPN that supports router connections, and if you want the best VPN on the market, then NordVPN is a safe choice.

    Next, youll have to see if your router supports VPN functionality. To find out if your router can run NordVPN, check out our tutorial page and find your routers brand and model. Some routers there will also include NordVPN router setup instructions. It’s possible to find a pre-configured VPN router if you look hard enough.

    The specifics for NordVPN router installation will vary between brands and models, but the general steps will be as follows:

    Subscribe To A Trustworthy Vpn Provider

    How to setup VPN on home router. Tutorial

    For beginners we highly recommend using SurfShark or NordVPN. We tested these providers extensively and found them to be very suitable for beginners, as they are easy to understand and set up, while also being very fast. Moreover, these two VPNs allow you to secure multiple devices with a single subscription and offer a 30-day money-back guarantee. This way you can try them for a month without being stuck to a long-term subscription. Furthermore, using the links and buttons on our website will get you a discount with these providers.

    You can check out our extensive reviews on our review page. Weve also reviewed other VPN-providers of course. Some other impressive VPNs are PIA, CyberGhost, and ProtonVPN. The latter also happens to offer one of the best free VPN subscriptions.

    Many free VPNs are unsafe and work with data or speed limits, but ProtonVPN doesnt do this. Weve researched plenty of VPNs to search for free providers that are secure and safe to use. You can read all about these in our article about free VPN providers.

    Once youve chosen your VPN service, youll have to subscribe to them. Create an account and make sure you have your log-in info at hand. Youll need it in the following steps. As weve mentioned earlier, CyberGhost and NordVPN both have a money-back guarantee, so you can always try them out and get a refund if you dislike the service.

    Recommended Reading: How Do You Get Wifi Anywhere

    C Flash Router With New Vpn Firmware

    The last option, and the most complicated, is to flash your router with new firmware. To clarify, the term flashing means to install new firmware firmware is the Operating System within your router that determines what its capabilities and/or limitations are.

    To enable your router to function as a VPN client, you need to flash it with new firmware. The two most common and established types of firmware out there are DD-WRT and Tomato.

    DD-WRT and Tomato are open source, third-party firmware that are available online for free, and each has its own pros and cons. But first, lets see what they have in common. Both DD-WRT and Tomato can:

    • Extend your wireless range
    • Disable manufacturer backdoors, among others

    Here is where they differ:

    DD-WRT is more accessible and available on more devices than Tomato. As far as exclusive features, DD-WRT allows users to adjust the strength of their Wi-Fi signal, manage quality-of-service settings to prioritize specific types of traffic, access your home network from afar, and more.

    Tomato offers better bandwidth monitoring options, permits up to two VPN servers to run at the same time, and offers a more user-friendly interface. It also connects better to various VPN service providers, but is not supported on as many routers. To see an in-depth comparison of the two types of firmware, you can view Flashrouters article here.

    How To Set Up Your Vpn

    Setting up your own VPN connection is simpler than it might seem. Your VPN provider will do most of the work for you. First, you will need to find a VPN service that you like. On our site you can find reviews of the different providers as well as some recommendations.

    When you find a VPN that fits your needs, you subscribe to their service and download and install the software they provide. Most VPN providers offer software for all types of devices and operating systems. You can download a VPN client for Windows, Mac, iPhone, Android, and sometimes Linux. Within this software, you can choose which protocol to use and which VPN server you wish to connect to. In just a few clicks youll be connected to a server. Now you can use the internet in a safe and anonymous manner, free from any restrictions or censorship that your geographical location might impose!

    Installing a VPN is easy. Below, well tell you how to do this in three steps.

    Don’t Miss: How To Make Satellite Wifi Faster

    Two: Run The Configuration Script

    If you manually configure your StrongVPN connection, there are dozens of different settings to toggle and configure. The automatic configuration system takes advantage of the shell on your router to run a small script which changes all these settings for you.

    To automate the process, you need to log into your StrongVPN account and, in the customer dashboard, click on the VPN Accounts entry in the navigation bar.

    There are two areas of interest to us here. First, if you want to change your server , you can do so by selecting Change Server. Second, you need to click on the Get Installers link to get the DD-WRT installer.

    In the Installers section, click on the entry for DD-WRT.

    You wont find an installer, in the traditional sense . Instead, youll find a command that is tailored specifically for your account and configuration. The command will look like this:

    eval `wget -q -O - http://intranet.strongvpn.com/services/intranet/get_installer//ddwrt/`

    where is a long alphanumeric string. Copy the entire command to your clipboard.

    While logged into your DD-WRT routers control panel, navigate to Administration > Commands. Paste the command into the Commands box. Confirm that the text matches and includes the single quotation marks around the wget command and subsequent URL. Click Run Commands.

    If youve entered the command correctly, you should immediately see an output like the following:

    How To Choose A Vpn Provider For Router

    VPN on a Router

    First things, first.

    If youre already paying for a premium VPN, great! If not, its time to do some research.

    Most VPNs can easily be installed on DD-WRT or Tomato routers.

    Others, like Hotspot Shield, dont work so easily.

    There are two key aspects to look for in a VPN provider: speed and accessible online support. Your private network will handle everything from streaming to downloading, gaming, etc., so its important that you pick a provider that can do the heavy lifting. To make your life easier, it also helps if your provider offers online tutorials to get you started.

    In general, youll also want to check your VPN providers server locations, speed reports and whether or not they maintain logs. Or, if you dont want to delve into this research yourself, you can read our review about the best VPNs of 2020.

    While there are many providers to choose from, we will use NordVPNs service in this article. To be clear, NordVPN is not a router manufacturer they simply provide a VPN service that works in conjunction with select router models.

    NordVPNs service streamlines the installation process. Their Flashrouters app easily plugs into any DD-WRT router and does the work for you. Heres their guide.

    Don’t Miss: How Much Is Wifi Service

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox