How To Setup Wifi Password

Option : Retrieve Forgotten Wi

How to set Wifi Password

If you are still unable to recover Wi-Fi password even after trying all these solutions, then you could try Tenorshare 4uKey – Password Manager. This is an iOS password finder and manager application that allows you to retrieve the password from your iOS device. Moreover, you could also export the recovered passwords to other applications and password managers. Below, we will tell you how to retrieve forgotten Wi-Fi password on iPhone and iPad using Tenorshare 4uKey – Password Manager

Step 1: Download and install Tenorshare 4uKey – Password Manager on your Windows or Mac computer/Laptop.

Step 2: Then, launch Tenorshare 4uKey – Password Manager and connect your iOS device to the computer using a compatible USB cable.

Step 3: When this iOS password finder detects the device, click Start Scan button.

Step 4: After the scan is finished, go to Wi-Fi account category on the results window to find all the Wi-Fi networks and their respective passwords.

Note: One can also export the recovered passwords to a .csv file, compatible with Chrome, LastPass, 1Password, or other programs. To export the passwords, you just need to click on the Export button and then choose any option of your choice to export the password.

How To Set Up D

If what you are using is a modem D-Link, to set the password of the wireless network, once you are logged in to the corresponding administration panel, please do the following: click on the tab setting, located in the upper left, and select the item 2.4G wireless Me what 5G wireless from the left sidebar .

In the new screen that appears, click on the button Wireless security and, in correspondence with the wording Protection mode you find it in the section Wireless security mode, select the option from the relative menu WPA2 only .

Then, enter the password you want to use, in the field Pre-shared key present in the section located at the bottom, and save the changes made by clicking the button apply.

If you think you need more information, you can refer to my specific guide on how to configure the D-Link modem and the section of the company website dedicated to assistance and support.

How To Change Your Router’s Wifi Password

1. Open your browser to the configuration page of your router:

You can access your router’s configuration page through your web browser on your computer connected to your network. If you can’t connect top the Wi-Fi because you don’t know the password, you can use an Ethernet cable to connect your computer directly to the router. This will bypass the need for the Wi-Fi password.

Typical router addresses are,,, or for Apple. Enter this address into your browser’s address bar. If this doesn’t work then you can press and hold the Reset button on your router for about 30 seconds to reset it to factory default settings. Then you can look up the default address for your router model and enter it into your browser.

2. Enter your router’s username and password details:

Every router requires a username and password before you can access the interface. In many cases the default username is “admin” and the password is “admin” or “password”. Of course this varies from model to model, so you should check your model online to see your exact login information. Most D-Link routers have a default user name of admin and password of admin or blank.

3. Open the Wireless section:

Once you are logged into your router, you will need to find the Wireless section of the configuration page. The exact name varies from manufacturer to manufacturer, but generally you are looking for a “Wireless” or “Wireless Settings/Setup” tab or button.

Recommended Reading: How To Connect Canon Mx492 Printer To Wifi

Choose An Encryption Type

There are several security options to choose from. The typical settings that you will see for most routers include WEP, WPA2-PSK, or WPA-PSK .

The WPA2 option is most secure for wireless connections and should be your choice. You may not be able to choose this option if you are using an older router.

Furthermore, if you will be connecting multiple devices and some of them are older router versions, you will not be able to choose and connect to a network that uses WPA2.

How To Change Your Wifi Password

How to Change wifi Password

To change your wifi password, most laptops and computers can follow the steps below: 1. Connect the device to an ethernet cable. 2. Open your preferred browser and type your routers IP address into the address bar. Start by trying the two most popular addresses: or If neither of these work, you can locate your IP address in one of two ways:

  • Find the IP address on the bottom or side of the physical router.
  • Use your phones mobile data connection to run a search query online for the model of your modem. The manufacturers site should list the correct address.

3. The IP address should take you to a page hosted by your internet service provider. When prompted for login credentials, enter admin” for the username and password. Alternatively, the password may be password” or there may be no password. 4. From there, steps can vary depending on the device manufacturer. Locate a section titled “wifi” and look for a specific field containing your password. For example, Cox customers can click on Wireless” and find their password in one of two fields:

  • For WEP encryption, the current wireless password is located in the Key 1 field.
  • For WPA/WPA2 encryption, the current wireless password is located in the Passphrase field.

If you are a Cox customer with a Panoramic Wifi-enabled modem, you can also change your password by using the Panoramic Wifi App. Simply click in the edit field for your gateway, enter a new password, and click “Save.”

Read Also: Dunkin Donuts Free Wifi

How To Activate Remote Management

If you have a capable router, you dont even need to be at home to monitor its activity. Thanks to remote management functionality, you can monitor it from anywhere using your smartphone or computer.

To access your router from an outside network:

  • Enter your routers admin panel.
  • Go to settings and look for Remote Management.
  • Turn on Remote Management and save your settings.
  • The reason why remote management is turned off by default is that it represents a certain security risk. Hackers might try to break your router password and use remote management to compromise your security. Thats why we recommend you turn remote management off when you know you wont be using it for a while.

    How To Change Wifi Password

    If you want to change the default router WiFi password then follow this step-by-step guide.


  • Enter the default username and password .
  • Navigate to Wireless> Wireless Security> WPA/WPA2 Personal > Password .
  • Enter your preferred password and Save the change.
  • D-Link:

  • Login to your router settings page via its default IP Address /
  • Input your username and password .
  • Go to Wireless> Wireless Security> Security Mode set to WPA2 only> Pre-Shared Key: enter your preferred password.
  • Apply the change > restart your WiFi and the new password will be applied.

    Don’t Miss: How To Check Wifi Speed On Phone

    How To Set The Tp

    You have a modem TP-Link And would you like to know how to configure the Wi-Fi password in this case? Then after logging into the device admin panel click on the tab advanced located at the top right of the page, select the item without strings and then that Wireless Settings from the left sidebar.

    At this point, make sure it matches the items. fullfilment of security requirements y encryption the options are configured respectively WPA / WPA2 Personal y BEA. If you have problems with WPA2, configure the option WPA2-PSK.

    Then enter the password you want to use to protect your wireless network in the field password and click on the button Save, to save the changes. If you have a dual-band modem, also change the Wi-Fi network settings to 5 GHz by clicking on the appropriate item at the top right.

    If you think you need more details, you can refer to my specific guide on how to access the TP-Link modem as well as the section of the company website dedicated to assistance and support.

    How To Set Up Your Wi

    How to Setup a Linksys Wireless Router with a WiFi Password – It’s Easy

    Can you survive the holidays without Wi-Fi? Probably not. Here’s how to prepare your network for guests and safely share your password with them.

    ‘Tis almost the season for visitors to slow down your Wi-Fi network. Inviting friends and family to stay with you at the holidays means sharing your precious internet with them. It also means enduring slowdowns, potential security holes, and sharing the Wi-Fi password . Here are some tips to get your network ready for guests, so you can focus less on troubleshooting and more on entertaining.

    Also Check: Connecting Roku To Wifi Without Remote

    Select Aes Algorithms With Wpa2

    Once you have selected WPA2 as the Security option, you could be asked to select the type of WPA encryption. If the option exists, select AES as the encryption algorithm.

    AES, also known as Advanced Encryption Standard is the most secure algorithm for wireless encryption. Certain routers may also give you the TKIP option, however, that is older and less secure.

    Is Change My Wifi Password Not Appearing On The App

    If this option isn’t appearing in your app, here are a few things you can try:

    • Go to your app store, download any available updates on the CenturyLink app, then try again.
    • Check to make sure the modem is fully plugged in and getting power.
    • Use the “Test My Service” link within the app to run a troubleshooter that can check for network issues.
    • Reboot the modem through the app or by manually unplugging it, waiting a full minute, and plugging it back in.
    • If rebooting doesn’t work, to have a service agent help you further troubleshoot the issue.

    Also Check: App To Watch Movies On Southwest Flight

    How To Change The Wireless Channel And Band

    Wireless routers support different 802.11 standards, which provide several distinct radio frequency ranges, also called bands, for use in Wi-Fi communications, with each band being split into multiple channels.

    If you have a newer router, the chances are that it supports the 2.4 GHz and 5 GHz bands. Because the 5 GHz band is less common than the 2.4 GHz band, it tends to be less crowded, making it a great choice for densely populated urban areas where Wi-Fi networks are present in massive concentrations.

    When it comes to choosing the most suitable Wi-Fi channel, a network analyzer such as NetSpot can provide you with the information you need to make an informed decision.

  • Download and install NetSpot.
  • Launch the application and activate Discover mode.
  • Wait a short while for NetSpot to collect information about surrounding Wi-Fi networks and present wireless data as an interactive table.
  • Look for the channel with the least number of networks present on it.
  • If youre selecting a channel in the 2.4 GHz band, try to choose the channel 1, 6, or 11. These are so-called non-overlapping channels, which means they dont overlap with one another.

    How To Change Your Wi Fi Password

    How to Setup a Linksys Wireless Router with a WiFi ...

    This article was co-authored by Luigi Oppido. Luigi Oppido is the Owner and Operator of Pleasure Point Computers in Santa Cruz, California. Luigi has over 25 years of experience in general computer repair, data recovery, virus removal, and upgrades. He is also the host of the Computer Man Show! broadcasted on KSQD covering central California for over two years. This article has been viewed 8,997,098 times.

    Wi-Fi is great for keeping you connected, but a poorly secured Wi-Fi can put your personal information at risk. Keeping your router password protected and changing the password regularly are essential keys to protecting your network and your data. Changing your password also keeps cheap neighbors from stealing your bandwidth! To change your Wi-Fi password, you’ll need to open your router’s configuration page, log in using your current details, and change the password under the wireless settings menu.

    You May Like: Do Southwest Flights Have Wifi

    Set Your Username And Password

    The screen in front of you will show fields for SSID and passphrase. SSID is the name of the network, commonly known as the username while the passphrase is the password that you will need to enter on all devices trying to connect to the network.

    Remember to choose a strong password. This must be a combination of letters, numbers, and symbols. If the password is easy to crack, you will not be able to keep yourself safe from hackers.

    Some online websites can help you choose a strong password for solid protection. Use them if you need to.

    Option : Find Forgotten Wi

    Are you panicking and asking “I forgot my Wi-Fi password” on various internet forums? If you are, don’t worry! If you have connected a Windows device to your Wi-Fi network, then you can retrieve the password from there. It is very easy to view your Wi-Fi password in Windows. The only pre-requisite is that you need to be connected to the Wi-Fi network at least once using the password, otherwise, you won’t be able to get the Wi-Fi password. Moreover, the password must be the same on the Windows otherwise, even recovering that password won’t do you any good. If everything’s alright, then you can follow the below steps to find the forgotten Wi-Fi password on Windows:

    Step 1: Right-click on the Wi-Fi icon in the system tray and then click on Open Network and Sharing Center option from the list.

    Step 2: Then, click on Change Adapter Settings link on the left pane menu and it will display network devices installed on your device.

    Step 3: Find Wi-Fi network > Right click on it > Click Status and it will open the Wi-Fi Status dialog box.

    Step 4: Click on Wireless Properties and then switch to the Security tab.

    Step 5: You can see the password as dotted characters in the Network Security Key text field. Check the Show Characters checkbox to display the original characters.

    Recommended Reading: Can You Have Two Wifi Routers In One House

    Router Guest Mode Without A Password

    Another option for sharing WiFi connectivity with guests involves setting up an unsecured guest network on your router. This is surely not the best option due to lack of encrypted data transmission and an open connectivity process, but it works. To set up a guest network on your router, you must be a network administrator. Nearly all modern routers support the guest network feature, and you can leave the password blank on the guest network .

    The downside of a guest network with no password or an easily guessed trivial password is that it is not very secure if you are in proximity to people. Its probably fine for your mountaintop cabin or your second home on Mars, however. Guest networks will work for any device type.

    Follow these steps to set up a guest network on your router:

  • Open your computers browser and paste your routers IP address into the address bar. Commonly, the address will be either or The IP address is almost always printed somewhere on your router.
  • Use your administrator credentials to log into the router.
  • Once youve logged in, youll need to locate the Guest Network option. You are likely to find it in the Wireless Settings section.
  • Find and enable Guest Network.
  • Next, name your guest network and set the password. You can opt for something as simple as Ourhouse or guest-password. You can also leave it blank.
  • Click the Save button to confirm the settings and create the network.
  • Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox