How To Setup Wifi Router Without Computer

How To Set Up A Wireless Router Without A Computer : 5 Steps

How To Setup a Wireless Router Without a Computer Using a Smartphone

In an age where computers have extensive capabilities, the question lingering on many peoples minds is can you set up a wireless router without the use of a computer? The answer is a resounding yes.

So if you are ever in a position where you need to set up a router, and you lack a computer, or for some reason your computer is malfunctioning, you can carry on with ease knowing that your smartphone or tablet can do the job.

This article will provide you with a step by step guide to help you set up your wireless router without the use of a computer.

How To Set Up A Modem Without A Computer

Because you are reading this post where we are discussing discreet routers and not one of those two in one modem-routers you get from certain ISPs let me tell you how to set up a modem without a computer.

  • First of all, connect the phone line provided to you by the ISP into the port of your modem labelled as DSL.
  • Secondly, use an ethernet cable and connect one end to the back of the modem and the other into the WAN port of the router.
  • Next connect the router power cord and the modem power cord to their respective power outlets.
  • Turn the power on for both the network devices and wait a couple of minutes for all essentials indicators to stabilize.
  • Because we have already learnt how to setup Wi-Fi router without computer, you can repeat the steps explained above if you need.
  • Connect your devices to the routers SSID using the password you have set in the steps above.
  • Enjoy browsing the internet.
  • Turn On The Wifi On Your Android Or Ios Smartphone Or Tablet

    Turning on the WiFi on your phone will show all the available WiFi networks. If you are at a place with many WiFi connections, you will find several networks in your WiFi connection. Therefore select the network that comes from your router and connect.

    The network name or SSID in most cases involves the brand name of your router in combination with some numbers. For example, if you are using a Netgear router, the SSID will be NETGEARXXX

    You can also check the network name/ SSID at the back of your router or in the device manual that accompanies the device when you buy it. In most cases, the network name will be listed together with the default WiFi password.

    Also Check: How To Find The Wifi Password On Mac

    Using A Third Party Router

    Although you can use a third party router rather than the router supplied by you ISP it is not always a good idea.

    In the UK my provider BT will only troubleshoot a line if you are using their router.

    In addition you may find as I did that the connection was much slower with a third party router than the iSP router.

    Having said that it is a good idea to have a spare router in case yours fails.

    If you do use a third party router then you may need to swap in the ISP provided one if you have Internet problems.

    Do You Have To Have A Computer Connected To A Router For Other Computers To Work Wirelessly

    How To Set up a WiFi Router Without a Computer

    Related

    Connecting to a wireless network is typically accomplished through the user of an intermediary, such as a router. In the past, leasing an Internet account began with the hard wiring of a desktop computer into the router. Today, however, many households use only laptops, tablets or other wireless devices. Connecting them is possible without having a computer connect to a router, depending on the configuration.

    Read Also: Can I Have Two Routers In One House

    Setting Up Your Linksys Wi

    How do I set up my Linksys Wi-Fi Router if I don’t use the Setup CD? Linksys Connect Setup Software Linksys Support SiteSetting up a Linksys router with a Static IP Account on a classic web-based setup pageIMPORTANT: herehereStep 1:Linksys Support SiteSearch QUICK TIP:How do I find my model number?Step 2:

    Select the Hardware version of your device.

    Locate the Setup Software for your computer and click .

    NOTE: When the End User License Agreement prompt appears, click the AGREE button.

    Step 5: Step 7:

    Click the License Terms link to read the license terms and information. Then check the box once done. Click Next.

    Step 8: 1 2 NextNOTE: Do not close this windowStep 9:Router name Password Next Step 10:DSL connectionNextQUICK TIP: Internet Service Provider NOTE: hereStep 11:OK Linksys Connect hereNOTE: NOTE: hereRouter namePasswordherehereExtending the range of your wireless networkLinksys Range ExtenderherehereRelated Articles:

    Was this support article useful?

    Thank you for your feedback.

    Feedback

    Please tell us how we can make this article useful.

    * Required

    Is It Possible To Use The Internet Without A Modem

    To access the internet, youll need a modem and an Internet Service Provider. You may connect your PC or gaming console to the modem directly using an Ethernet connection, but youll need a wireless router to connect to the network wirelessly. There are also various combinations of modem and router that come in a box.

    Frequently Asked Question

    What should I do if my router doesnt recognize my computer?

    Specific ports are required for certain video games and other software on your network. If you want to open a port, use the static IP address and port forwarding feature of your router.

    Is it because Im in a different place?

    If the router connects to the internet but cant connect to Wi-Fi, its possible that its broken. Check to see whether your device is connected to Wi-Fi and try resolving any wireless issues.

    What type of Wi-Fi router is the best for me?

    When buying a router, make sure it supports the most up-to-date Wi-Fi generation and has a minimum speed of 25Mbps. If your router must cover a wide area, consider investing in a long-range or Wi-Fi range extender.

    You May Like: Can You Have 2 Routers In Your House

    How To Set Up A Private Wifi Network Without Internet

    Step 1: Connect Your Device to the Wireless Router

    First, you have to connect your PC/Mac to the wireless router. I recommend using an Ethernet cable, which you can connect to one of the LAN ports and the PC/Mac.

    Step 2: Log into Router Settings

    To set up the wireless network, you have to access the router settings. To do this, you have to enter the Wi-Fi router IP address into the browser URL box. Once the page is ready, you can log in using the username and password. You can find the default username and password information on the user manual.

    Step 3: Set up DHCP Server

    In this step, you have to set up DHCP on your wireless router. You can find a corresponding section on the router settings page. Go to this page and enable the DHCP server.

    You also need to define the DHCP network range. Here, make sure that you exclude the router IP address to ignore further issues. Then, you can decide the range and apply the settings.

    The wireless router will allocate a dynamic IP address to each device connected to the network.

    Step 4: Set up the wireless SSID

    You can now go back to the main menu and find the Wireless menu. Go to this page and enable the option for wireless networking. You also have to provide the wireless SSID and the wireless key. Depending on the router you use, there could be interfaces for the channel and other settings.

    Once you have made the changes, you can click on apply.

    Step 5: Connect a Wireless device

    ping 192.168.0.2

    What If You Dont Have An Internet Connection

    Connect WiFi to Router Without Wifi Adapter to Your Computer or Laptop

    Did your web page not load? Dont panic, there are a few more steps you can take to troubleshoot the problem:

  • Try loading a different website or use a different device. If a different website loads, it could be that the first website you tried is down. If a different device connects to the internet just fine, the problem might be with the first device you tried to connect.
  • Restart your computer. Once your computers done rebooting, test your internet connection again.
  • Check your cable connections. Make sure the coax cable or phone cable, Ethernet cables, and power cord are all securely plugged in and attached to your modem and router or computer.
  • Power cycle your modem. Unplug your modems power cord, disconnect your router if you have one, and let the modem sit for a few minutes. Then plug the modem back in and let it boot up all over again. After its done booting up, you can plug the router back in and let it boot up too.
  • Register your modems MAC address. Your internet service provider needs your modems MAC address to connect you to the internet. The MAC address should be listed on a label attached to your modem.
  • Make sure youre connected to the right network. If your computer is trying to connect to an old network, you might not get that glorious internet connection you seek. Check out our mini-guides on how to connect to a network on Windows and on a Mac below.
  • Don’t Miss: Can You Have Two Different Routers In One House

    What Happens If I Forget My Username And Password To My Wifi Network

    This is something you dont have to worry about because there is a way to restore a new username and password to your router.

    First, you will need to reset the router to factory default settings. Upon completion, the device will remove all previous settings, and return to default. Enter the default username and password, both admin and you can regain access and enter a new username and password.

    Why Wont My Epson Printer Connect To My Computer

    Try connecting the product to your router, access point, switch, or hub with another Ethernet cable. Try printing from another computer on the network to see if the problem persists. If network communication was interrupted while starting Epson Scan, exit Epson Scan, and restart it after a few seconds.

    You May Like: Does Dunkin Donuts Have Free Wifi

    What Is A Router & Its Function

    A router is a networking device that divides your Internet from your modem to the devices in your network. You can connect from your computer, mobile phone, smart TV, and other cable or wireless devices to the Internet.

    A routers principal function is to distribute your Internet traffic to your networks correct device.

    It achieves this by assigning all your devices an IP address, and it is not transferred to your smartphone when you try to open a page on your PC. A router creates and manages your local network settings. You may enable security settings, prioritize traffic to some devices, and more using a router.

    A router also allows your gadgets to communicate across the network. An application on your smartphone will enable you to adjust the settings of your smart home devices, for example.

    Connectify Hotspot Does More Than Just Share The Internet Via Wi

    How to setup WiFi router without a computer?

    Along the main functionality of sharing any type of Internet connection via Wi-Fi or Ethernet, Connectify Hotspot comes packed with other cool features:

    Recommended Reading: Dunkin Donuts Login Wifi

    Test Your Internet Connection

    Once your modem and router are booted up, its time to test your internet connection.

    Open your web browser and head to www.google.com or another search engine. If the web page loads, congrats! Youve got an internet connection.

    If you test out your internet connection by going to a website you recently visited, your web browser may load it from the cache. So youll think your internet is golden, but you may not actually have an internet connection at all.

    How To Set Up A Private Wi

    ByMorton Taylor published on January 17, 2022

    When most people talk about wireless networks, they talk about a network connected to the internet. For most people, a wireless network without internet is an out-of-the-bounds concept. However, I would say it is one of the most underrated things in the world of networking.

    For starters, a private Wi-Fi network without internet can help you with entertainment, content, and other network-related features when used properly. This guide will not only teach you how to set it up but will also answer some of the most important queries that a networking newbie might have regarding a wireless network without an internet connection. Lets begin!

    Contents

      You May Like: Blink Sync Module 2 Not Connecting To Wifi

      Want To Setup Your Wi

      Matt Collins0

      In case you need to set up your wireless router and your computer is not working or you dont have one, there is nothing to worry about. You can still set up your wireless router with the help of your tablet or smartphone.

      Practically any smartphone or tablet with an installed web browser will do the job.

      What you actually need to do during the setup process is to change the default network name and wireless password, as well as the default router password. We should also change the default IP of the router for better security but this is not mandatory. Of course, there are other things you can change but we wont talk about that in this article.

      Things Needed to Setup Router with a Smartphone

      Before you begin setting up your router here are some things you need to have:

      • A tablet or a smartphone with a web browser installed on it
      • You need to know the router default Wi-Fi password
      • You need to know the router default IP, username and password

      If you are worried about where to find the default login details and the Wi-Fi password these can often be found on the label which is usually placed on the bottom side of the router. This label contains all the details you need to set up your router. If there is no label, you can check the user manual or search through the manufacturers support website.

      The default IP and login details

      Username: admin, user

      How to Set up Your Router Using a Smartphone

      Important Notes

      How Can You Connect A Desktop Pc Without Internal Wlan To A Wireless Network

      How to Connect to the Internet with WiFi Without a Wireless Router

      If your desktop PC doesn’t have a built-in Wi-Fi adapter, then your best bet is to add one yourself. They are affordable and easy to install and offer the best wireless performance. Alternatively, you can use USB tethering to connect your smartphone to get you on the Wi-Fi network relatively quickly. The only downside is that you must leave your smartphone plugged in to take advantage of it.

      • How do I connect to Wi-Fi on a Windows 7 desktop?

        To connect a wireless network in Windows 7, go to Start> Control Panel> Network and Internet> Network and Sharing Center. Select Connect to a network, choose your wireless network from the list, and select Connect Automatically> Connect. If prompted, enter the network password.

      • How do I connect a Dell desktop to Wi-Fi?

        To access Wi-Fi on your Dell desktop, your computer must have a wireless network adapter built-in, or you’ll need to connect an external Wi-Fi adapter. To connect to your wireless network, go to the Windows taskbar and select the wireless network icon. Next, choose your Wi-Fi network > Connect > enter your network password, and follow any additional prompts.

      Read Also: Blink Sync Module Solid Blue Light Only

      Popular Articles

      Related Stories

      Stay on op - Ge the daily news in your inbox