How To Strengthen Wifi At Home

Advanced Solutions To Boost Your Wi

Improve Wifi Signal at Home FOR FREE!

At times, homeowners need to evaluate solutions beyond the router they use or where they place it. Advanced options give people more choices in the way they configure the router or how it is used, but they are often not simple steps to follow. In some cases, people may need to hire an expert to set it up or troubleshoot. Homeowners with moderate technical skill should be able to attempt at least one or two of these. In all cases, people should confirm they know what to do, and what to avoid. Taking the wrong actions may result in a broken system and require repair.

Extend Your Wifi Range

Get a Wireless Range Extender. Some of these are expensive BUT there are also software programs that can use your computer as a hotspot to help extend your signal. The biggest thing you need to watch out for when choosing one, though, is to make sure it runs on the same signal type as your router.

Optimize the Frequency Band: Depending on the frequency band your router is operating off of, you may get interference from other sources that are operating on the same frequency. Dual-band routers should be set to the 5GHz since most routers are operating off of a single band and fewer sources will be set to this. Fewer people operating on a band means less interference and greater wifi range.

Switch To A Different Wifi Channel

Just like lanes on the highway, there are multiple WiFi channels on which a WiFi router can broadcast. Even though most countries have six non-overlapping channels , many users leave their router set on the default channel, which is usually either Channel 1 or Channel 6.

This results in a WiFi traffic jam as too many packets are trying to drive on the same line. The solution is simple: find out which channel is occupied the least and switch to it. This can be done with the help of NetSpot, a professional and easy-to-use WiFi analysis and surveillance tool.

With a new channel selected, you need to tell your WiFi router to use it:

  • Log in to your router as admin.
  • Go to Settings and look for Wireless Settings.
  • You should see an option called Channel. The chances are that it will be set to Auto.
  • Select the desired channel.
  • Save the new settings and wait for your router to restart.
  • You can now verify that your router is broadcasting on the new channel using a WiFi network analyzer like NetSpot.

    Don’t Miss: Can You Have Two Wifi Routers In One House

    Use An Ethernet Cable Instead

    With all the advancements in wireless technology, its counterintuitive to go back to a wired connection, but connecting your laptop directly to the router with an Ethernet cable improves things two ways: Wired connections in your home are always faster and more reliable than wireless. Youre also taking your laptop off the Wi-Fi, freeing up the signal for other devices that cant plug in, like your smart speakers in the den or your kids iPads in the living room.

    Some homes built in the last 10 to 15 years are pre-wired with Ethernet. Look for an RJ45 Ethernet jack next to the cable TV connector or phone jack on the wall in each room. You can identify RJ45 fairly easily, as it is about twice as wide as the RJ11 phone jack. If youre lucky enough to have this installed, a connection through this wired network is the best way to get your laptop or desktop PC on the internet.

    Most business laptops have an Ethernet connector built in, if not, you can purchase a USB-to-Ethernet adapter for about $20.

    Place Your Router In The Perfect Spot

    10 Simple Ways to Boost Your Wi

    The most simple solution to boost Wi-Fi signal starts with the correct placement. Although people may have limited options for the spot of their router, this choice can make it stronger or weaker. As a general rule, homeowners want a clear spot not too close to appliances or other electronics, close to the center of the home. While putting the router in a corner away from other things may seem like the best place to keep it out of the way, this increases the likelihood people will face a weaker signal.

    Instead, homeowners should evaluate the home and where the bulk of the devices stay. The ideal spot may not be the exact center of the home, but rather the center of the need for connection. People who do not want a strong signal in a remote part of the basement may not need to target their router in that direction, to avoid wasting their efforts. By comparison, homeowners who want better Wi-Fi in the garage or driveway may need to consider that distance in their choice of a router location.

    Although the kitchen or dining room might seem like the perfect place, this is often counterintuitive. The modern kitchen has several devices that may need Wi-Fi, like the family computer or even a smart refrigerator. As a result, many homeowners choose to place the router there for the best signal. However, the kitchen is often full of metal equipment to block waves, along with appliances that do the same. This can weaken the signal to other areas of the home.

    Recommended Reading: Wifi Booster For Basement

    Tips For Improve Your Wifi Speed And Range

    Keep Your Router At A Right Place

    Keeping your router at a right place is very important as this helps in getting proper signal for device authentication. You should try to keep your router always in the center of your home rather than a corner because this will let the router broadcast signals properly and equally in your home.

    Keep Your Router Up, Like Thumbs Up

    You should try to keep your router in upward directions on any table or any stand. This will help you to get more signal strength because then signal waves can easily travel without having much disturbances hence it will increase the signal strength.

    Keep Router Away From Electronics

    If you have kept your router with some electronic item having a motor, you should change the placements now because it is indirectly a loss of signals of your router actually electronic items attracts the signals of wifi router towards them.

    Point Your Router Antennas In Different Directions

    If youre having a router with antennas then you can change the direction of Antennas, one towards up and one towards left or right horizontally which will increase the signal strength of your router. Keeping antennas in two different directions would help you to have equal signal whether your phone is in Vertical or Horizontal

    Measure Your Wifi Signal Strength

    Control Bandwidth Hogging Apps

    Secure Your WiFi Router With A Password

    Secure Your WiFi Router

    Use A WiFi Extender

    Which Router Is Best For You

    These days, youll find two types of wireless routers: traditional models and mesh network models. Youre probably familiar with the former. Theyre single-unit devices that plug into a modem. They can be plenty fast, supporting even the data-hungry activities of families with dozens of internet-connected devices. But they dont always have the range to effectively blanket a whole home in WiFi, especially if you have a large or obstacle-laden layout.

    Mesh routers are typically packaged in a set with multiple unitsa hub and one or more satellitesthat work together to spread WiFi into the far-flung corners of a home. If you place the hub, which plugs into your modem, near the center of your dwelling, you can shift around the satellites, which help relay the WiFi signal, until you find a configuration that helps you eliminate any dead spots.

    So why doesnt everyone simply choose a mesh router? Theyre pricey, for one thing. The top-rated models in our ratings cost $400 to $500. By contrast, our top-rated single-unit model sells for $200, followed by one that goes for about $160. Theres also an argument to be made for simplicity. With a mesh system, you have several devices strewn about your home vs. just one with a traditional router. If you dont actually need mesh routers, theres no reason to invest in them.

    Recommended Reading: Can You Have Two Wifi Routers In One House

    Ways To Boost Your Wi

    Check out these quick tips to boost your wireless signal from your router, extend and optimize your Wi-Fi coverage, and speed up your surfing.

    Browsing slowing to a crawl, the inability to stream, dropped Wi-Fi signals, wireless dead zonesevery one of these problems is maddening in a world where getting online has become, for some, as necessary as breathing.

    If you feel like your Wi-Fi has gotten sluggish, there are many tools you can use to test the speed of your internet. There are also a few tricks you can try to troubleshoot your network issues. However, if the only way you can get decent reception is by standing next to your wireless router, these simple tips can help optimize your network.

    Measure Wired Internet Performance

    How To Improve Your Internet & Wifi Connection At Home

    If youve tried the 10 above-described tips for improving wireless internet performance without any success, then its time to shift your focus from your WiFi and measure wired internet performance. To do that, you need an Ethernet cable and a laptop or desktop computer with an Ethernet port.

  • Connect one end of the Ethernet cable to your modem.
  • Connect the other end to your laptop or desktop computer.
  • Open the following address in a web browser: .
  • Compare the results with the speeds advertised by your internet service provider.
  • We recommend you repeat the wired internet performance test several times, preferably at different times of the day. Once youre certain that your internet service provider is to blame, send them the results of your tests and ask them to fix the problem. If they fail to do so, then its probably time to switch to a different internet service provider because even the best tips on how to increase WiFi signal wont help you.

    Also Check: Southwest Airlines Wifi Price

    Tip #: Check For Equipment That Might Be Causing An Interference

    As wireless networks utilize radio frequencies to send and receive data, theres a chance your wireless signal may be weak due to interference from equipment sending radio signals. All of the following devices can interfere with wireless signals:

    • Microwave
    • Cordless telephones
    • Some satellite TV receivers

    In general, wireless technology of various sorts is only increasing. This means that you likely have multiple forms of wireless equipment sending signals throughout your home. If any of that equipment is operating at the same frequencies as your wireless router, interference is going to occur.

    Youll know that youre dealing with a signal interference issue if any of the following are true:

    • Your wireless devices consistently show low signal strength or the signal strength appears to go up and down even when youre not changing locations
    • You experience a far slower internet connection when connected to Wi-Fi
    • Your file transfer rates suffer when connected to Wi-Fi
    • Bluetooth devices have difficulty pairing
    • You regularly lose internet connection

    If you believe there may be interference issues, turn off your other devices that are also sending out wireless signals, one-by-one. Check to see if there is a difference in the signal strength or range after you turn off each device. If you see a noticeable change after any device is turned off, youve found one of the culprits.

    Tip #: Reduce Electronic Interference From Other Devices

    If you have a newer modem, opt for a 5 GHz frequency signal to get a stronger connection and avoid congestion from surrounding devices. Put at least 5-10 feet of space between other devices and your router to help reduce interference and competition.

    Here’s why: WiFi is just one of many radio frequencies all around us these days. Devices that use the same 2.4 GHz frequency range can hurt your internet speed. These include many microwaves, cordless phones, Bluetooth devices, TVs, wireless security systems, baby monitors, garage door openers, and more. Some of these generate short range interference that can affect your WiFi even when the device is turned off. Many newer routers support automatic band-switching, meaning they will detect and switch devices to a faster frequency, but if your router is more than a couple of years old, you will want to manually change to a 5 GHz connection whenever possible. You can read more about the difference between 2.4 GHz and 5 GHz, or find out how to manually change the wireless channel on your router to avoid congestion.

    Recommended Reading: How To Use Your Roku Tv Without Remote

    Tip #: Adjust Your Router Antenna

    If youre like me, you dont have a high-powered wifi router that even has antennae. However, if youre using one of the many routers available that do have such multiple antennae, adjusting their direction could help improve your signal.

    Its easy to think that pointing your wifi antenna straight up was the right way of doing things. However, this is actually not the case in almost any situation. Instead, if youre using a 2.4 GHz router, point them perpendicular, e.g., one antenna pointed vertically, and one horizontally, making an L shape. For 5 GHz, point them flat out or at a 45 degree angle for best results.

    A former Apple wifi engineer shared a few tidbits on Mac Observer. You can check out more details and a few more of his tips here. Meanwhile, you can find some interesting data on DSLReports from a networking professional who did a test using both frequencies.

    How To Get A Stronger Wifi Signal

    5 Ways To Boost Your WiFi Signal Strength And Connectivity ...

    Before you run out to buy a new router, try these tips for improving the signal throughout your home

      When you shop through retailer links on our site, we may earn affiliate commissions. 100% of the fees we collect are used to support our nonprofit mission.Learn more.

      Few gadgets in your home can make you quite as frustrated or bewildered as a router with a crummy WiFi signal. Without a fast and reliable internet connection, you find yourself huffing as you wait for websites to load on your laptop, fidgeting as YouTube videos freeze on your tablet, and staring in despair at email inboxes and social media feeds as they struggle to refresh on your smartphone. As for streaming the latest edition of WrestleMania on your smart TV? Forget about it. To add to your angst, you may not know how to troubleshoot those problemsbeyond calling a tech-savvy relative and pleading for help.

      Sick of all the waiting? Let our experts bring you up to speed on solutions.

      Don’t Miss: Mx492 Wifi Setup

      Turn Things Off And On Again

      Do it to your router. Do it to your modem. Do it with the devices you have connected to Wi-Fi. Everything needs a break once in a whilebut especially your modem and router.

      Your modem translates internet signals between your home network and the ISP. If your internet is acting up, resetting your modem is a good place to start troubleshooting. You may be able to fix modem issues with a quick power cycle. Sometimes you have to call your internet provider to reset your modem on its end to make sure your modem is properly calibrated to be compatible with your ISPs signals.

      Your router could also benefit from a quick reset to clear its memory and give it a fresh start on tasks that were bogging it down before.

      It might seem simplistic, but turning your home networking equipment off and on again can really give your network a boost. We recommend rebooting your equipment regularlyat least once every few months. But keep in mind that doing this will leave you without internet for a few minutes, so plan to restart your equipment at a time when no one needs an internet connection.

      Popular Articles

      Related Stories

      Stay on op - Ge the daily news in your inbox