Why Turn Off Wifi At Night
Besides the obvious parental control uses, you can turn off your router to prevent any unforeseen charges on your internet bill. Most software schedules updates while you are not using the device, usually at the dead of night, and large updates may go over your internet limits.
If you are energy conscious, you might feel the need to turn off electronics you dont use while asleep. It is evident that everyone will have their reasons, and this guide will help you to turn off your Xfinity internet at night whatever reason you may have.
How To Turn Off Your Wifi
We have different devices in our home that are depending on the WiFi connection. Here is how to disable WiFi on the most frequently used ones.
You can easily access your laptop WiFi settings in the bottom-right of the desktop screen. All you need to do is to click on the WiFi icon, the list of available networks will o
pen. Take a look at the bottom of the list and you will see a blue WiFi button. Click on it and your WiFi will be disabled. When you disable WiFi this way, make sure that Turn Wi-Fi back on is set to Manually.
If you want to enable it again, just click the same button and your laptop will connect to the WiFi in a few seconds.
If you want to disable WiFi on an Android device the steps are almost the same. You will need to go to the Settings too. Just swipe down from the main screen and click the little gear icon. Then click on Connections and click the toggle button next to WiFi to disable it.
In case you are using an iPhone or an iPad it will take a few extra steps than just clicking on the WiFi icon in the Control center. When you tap on the icon, it just disconnects the device from the router, but WiFi is not completely deactivated. There are options for Optimum router and others that can allow you to block and unblock a device from the network but you need to actually disable WiFi on your device.
Disconnect Roku TV From Your WiFi
Use your remote to open the menu on your TV screen.
Why Disable Wifi On A Router
The main reason consumers look to disable the WiFi on a router is when they are going out of town, as it is always advised to disable a routers WiFi before leaving town for any period of time, leading many folks to learn how to turn off a router remotely. Another great reason to disable WiFi on a router is if you are using the Ethernet cable to access a wired Internet connection and have no need for a wireless connection.
If you accidentally leave your wireless network on during a vacation, make sure to check the router for malware when you get back.
Don’t Miss: Troubleshooting Blink Sync Module
Connect To Home Wifi Remotely 3 Easy Steps
Youve got your WiFi router allowing you to do all sorts of things from the comfort of your home, be it seeing someone you love, attending meetings, or even getting an education. What of all these? Your router allows you to turn your home into a smart home, controlling all appliances remotely!
If remote access to an entire world of things is made possible by your home internet, how about accessing your home router remotely?
Sounds cool, right? It surely is.
But wait, does that mean you can access your home internet while being away from home? Nope.
How To Connect To Home Wifi Remotely
To enjoy remote management of your router beyond the comfort of your home, you do need to have a few things. Firstly, the device you plan to access your router should be connected to an internet network.
Secondly, you would need to remember some information related to your router. These include your routers IP address, admin username, and password . You can either note these somewhere for convenience or feed them into your brain memory.
With pre-requisites out of the way, lets check and find out the three easy steps you need to follow to set up remote management for your router.
Read Also: Can I Have Two Routers In One House
Cut Your Emf Exposure
WiFi is a lot more convenient than ethernet, and most modern internet-connected devices dont even come with ethernet ports anymore. So increasingly WiFi isnt even seen as an option its just how you access the internet.
But thats no reason to keep your WiFi routers on when theyre not in use most notably, when you and your family are asleep.
The type of radiation emitted by your WiFi router is a form of microwave EMF radiation. This is the same type of radiation emitted by cell phones.
There are literally thousands of high-quality peer-reviewed scientific studies linking this type of radiation to negative health effects like cancer and infertility. In one such study, scientist Dr. Martin Pall calls WiFi an important threat to human health and details seven well-established effects of WiFi exposure, including sperm dysfunction, cell damage, and oxidative stress.
The World Health Organization lists EMF radiation as a Class 2B carcinogen. In reality, there is no safe level of EMF.
This type of EMF radiation is also linked to sleep disruption.
In short, there are a lot of WiFi health risks that make limiting your exposure worthwhile.
If you have children, this is even more important, because children and babies are more vulnerable to damage from EMF radiation than adults.
So, to begin with, you definitely dont want a WiFi router in the bedroom. You want your WiFi router radiation at the safest distance possible.
Block Specific Devices With Mac Filtering
If youd rather not nuke your network entirely, you can block specific devices with a feature called MAC Address Filtering. It isnt a particularly effective security setting, since its easy to bypass, but itll work for our purposes.
Again, youll have to hunt around for this setting, but on my Asus router, it was under the Wireless MAC Filter tab in the Wireless section of the settings. Turn the MAC filter on, and youll likely be given a choice: you can either allow certain devices, blocking all others, or block certain devices, allowing all others. Since its 2021 and you probably have more than a couple Wi-Fi devices in your house, the Reject or Block setting is probably the best.
To block a certain device, youll need to know its MAC addressa 12-digit number unique to that specific device. You can find a devices MAC address by checking your routers list of connected devices, which might be under the Network Map,Client List, or similarly named option. Itll match MAC addresses to conventional names like Jacks iPhone.
Sometimes, these names are difficult to understandmany Windows computers have names like DESKTOP-BD0GFITso you may need to do some extra digging with third-party software to get more information on a given device. For example, you may not know whether your daughters laptop is DESKTOP-BD0GFIT or DESKTOP-SE8WDRE, but if you can determine which is the Dell and which is the HP, you can figure out which MAC address belongs to her.
Read Also: See Saved Wifi Password Mac
How To Turn Wi
The Wi-Fi settings on some wireless devices are easier to control than others. However, while the options may be slightly different on some devices, the Wi-Fi settings are usually found in a similar place or under similarly named menus.
In Windows 10 and earlier, disable Wi-Fi through Control Panel. It stops the computer from connecting to Wi-Fi until you re-enable it. Another option is to turn off Wi-Fi from the Windows taskbar. Select the Wi-Fi icon, then select Wi-Fi to disable it.
Laptops sometimes have a physical Wi-Fi switch on the front or side that, if turned to the off position, physically shuts off the Wi-Fi antenna, which is the same as disabling Wi-Fi through Control Panel. Move the switch to the On position to turn Wi-Fi back on.
To turn off Wi-Fi on macOS, go to the menu bar, click the wireless icon, then choose Turn Wi-Fi Off.
Some computers have the option to turn off Wi-Fi with a key combination. Look for a key with a wireless icon, then press either the Fn or Shift key and the wireless key to turn the Wi-Fi connection on and off.
How Does Wifi Work
Although we all know it as WiFi, this term actually refers to wireless fidelity. This widespread technology allows people to connect to ultrafast broadband internet from nearly anywhere. Since these connections do not use any wires, they rely on radio waves to transmit data.
Although it works similarly to car radios and cell phones, WiFi uses a different set of radio frequencies, or RFs, to avoid signal disruptions. While AM radio signals work in the kilohertz range, FM relies on megahertz, or millions of hertz per second. WiFi, on the other hand, operates in the 2.4 and 5 gigahertz range.
With wireless internet technology always moving forward, this is just the beginning. Connections are getting faster and faster every day and supporting more data streams than ever before.
Recommended Reading: Can I Have Two Wifi Routers In My House
How To Turn Off Wifi Step By Step Instructions
In the last 20 years, WiFi has transformed from a fun novelty to a household staple. In the United States, 9 out of 10 adults use the internet daily from their phones, computers, and TVs. Many refrigerators are even hooked up to WiFi connections, sending wireless radio waves all through the house.
Outside the house, wireless internet connections are equally abundant, flowing across all your favorite stores, public libraries, and everywhere in between. Many cars even act as mobile hotspots to allow passengers to quickly connect to the internet and use it wherever they go.
Although WiFi offers convenient access to the internet, exposure to its radio waves can prove detrimental to your health.
Minimizing your exposure can help prevent health issues, though that can prove difficult while out and about.
Thankfully, in your own home, you can simply switch off wireless internet and reduce the harmful radiation in your living space.
Heres what you need to know.
You might be interested in: Do Cell Phones Emit Radiation in Airplane Mode?
Quick note! If youre interested in learning more about EMF radiation, Nick Pineaults The Non-Tinfoil Guide to EMFs is a great read. The book explains EMF radiation AND its entertaining. It does cost a few dollars but I highly recommend it!
How To Turn Off Someones Wifi With Cmd
This blog post will answer the question, How to turn off someones wifi with cmd? It will also cover how to turn wifi on/off using command prompt. It outlines how cmd can be used to disable peoples wifi using cmd commands. This article also talks about how to hack wifi passwords to turn off someones wifi. It also discusses the methods to keep yourself safe from such hacks.
Also Check: Wifi Extenders Compatible With Spectrum
What Effect Does Wifi Have On My Health
The billions of radio waves per second produced by WiFi are essentially non-ionizing radiation. This type of radiation excites the atoms in your body, causing them to vibrate at high rates of speed. Day after day, the exposure causes damage at the cellular level, potentially resulting in serious health problems.
Through many research studies, scientists have indicated that the problems often begin as the cells inside your body suffer oxidative stress from sustained exposure to radio frequencies. This type of stress accelerates aging at the cellular level and even harms protein and DNA.
As this issue continues, the cells fail to function as intended, leading to tissue damage and serious health complications. Cancer, diabetes, and metabolic disorders, for example, are all likely triggered by oxidative stress. Neurological disorders can also arise, including Alzheimers disease, as the nerve cells in the brain die.
Reproductive disorders link back to radiofrequency exposure as well. For starters, the radiofrequencies disrupt the bodys ability to produce the right amount and type of hormones. This can impact everything from sperm production to ovulation. In addition, men may suffer changes to the structure of their testes, further contributing to lowered sperm counts and viability. And if women do manage to get pregnant, WiFi can impact the growth of the baby in the womb.
Turn The Wifi Off To Help Fight Anxiety
Recent cellphone-attachment research, reported that almost half of those surveyed claim that they wake up to look at their device 23 times in the middle of the night. Thats what I call maximum distraction. Another 35% admitted that looking at their phone before bed affects their quality of sleep. Its probably not a big surprise to learn that science is proving them right.
Dr. Larry Rosen studies how technology effects our brains and causes anxiety. In one research study he found that anxiety predicted sleep problems. And he found that the more anxious people were the more likely they were to use their devices during the day, the more likely they were to wake up and check them at night. Dr. Rosen says the anxiety about needing to stay in contact negatively impacts sleep- as does waking up to connect.
If you make it a practice to unplug and turn that WiFi off at night, chances are you may find you get out of the habit of turning to your device during sleep–or even checking it right before bed.
Recommended Reading: Southwest Airtime Player
How To Turn Off Your Wifi Router Remotely With Your Phone
Can I turn off my router from my phone?
Another option to turn off your WiFi router at night is by using your smartphone. Heres how.
Some companies, like Asus and Verizon FiOS, have apps that can be used to turn off your WiFi router. You can install these apps on your phone to control and manage your WiFi modem. This means you can shut down your WiFi router using your phone, whenever you want.
What if neither your internet service provider or WiFi router manufacturer has an app available? Dont worry: theres still a way to do this.
All WiFi routers can be accessed and controlled through a web browser on the same network. And your phone has a web-browser.
So you just have to open the web browser on your phone and go to your WiFi routers web address . From there, you can find an option to shut it off.
Here are links to the instructions for how to disable WiFi on some of the most common routers and internet providers:
ISP specific Modem/Router Instructions:
Can You Turn Off Wifi To Certain Devices
MAC Address Filtering is an alternative to blocking all devices on your network for those who prefer not to nuke their networks entirely. Look at your routers list of connected devices for MAC addresses which might be listed under the Network Map,Client List, or similar names, such as https:///config/default/.
You May Like: Will Blink Cameras Work Without Wifi