How To Turn On Wifi On Windows 10

Disable In Windows Device Manager

How to Fix Windows Wifi Wont Turn ON – ( SOLVED) 100% Fix

Access the Device Manager by right-clicking with your mouse on the My Computer icon on your desktop or in the Windows Start menu. Select Properties from the pop-up menu, click the Hardware tab in the window that opens up, and click the Device Manager button.

In Windows Vista and later, there is no Hardware tab. Click the Device Manager link in the System window.

Find the Wi-Fi adapter in the list of hardware devices. Right-click the adapter name and select Disable from the pop-up menu. If no Wi-Fi adapter is found in Device Manager, the Wi-Fi adapter drivers are not installed.

Solution : Turning On The Required Service

Some users have reported that their issue was due to the required Wifi services not running. Therefore, make sure to check the required services before proceeding. Heres how to do it:

  • Go to Start Menu, type in Services and open it up.
  • In the Services window, locate the WLAN Autoconfig service.
  • Right-click on it and select Properties. WLAN Autoconfig Windows Services
  • Change the Startup type to Automatic and click Start to run the service. Starting WLAN Autoconfig Service
  • Change The Power Management Settings In Windows

    One of the most common reasons why your Laptop keeps losing WiFi connection in Windows is because you might have done few changes in power management settings.

    To solve the wifi turning problem, follow these steps carefully:

    Open control panel

    Open control panel go to network and sharing center and then go to change adapter settings

    From there right-click on your WiFi and click on properties

    Now it will open wifi properties windows, where click on configure

    Now from here, go to the power management tab, and uncheck the checkbox saying Allow the computer to turn off this device to save power

    You can also watch this video for doing the above steps

    There is a good chance that this will fix your problem, if it doesnt, check the next solution.

    Also read:

    Read Also: How To Connect Roku Tv To Phone Without Wifi

    Enable Or Disable Auto Switch In Command Prompt

  • Open a new command prompt.
  • Type or copy-paste the netsh wlan show profiles command, and hit the Enter key to see the available wireless network profiles and interfaces.
  • Note of the wireless network profile name you want to enable or disable Auto Switch for.
  • To enable the Auto Switch feature, run the command: netsh wlan set profileparameter name=”< Profile Name> ” autoswitch=Yes. Substitute < Profile Name> with the actual profile name.
  • Similarly, you can disable the Auto Switch option with the following command. netsh wlan set profileparameter name=”< Profile Name> ” autoswitch=No.
  • If you have a few wireless interfaces, you may want to apply the change to a specific interface only. In this case, you the following syntax: netsh wlan set profileparameter name=”< profile name> ” interface=”< Interface Name> ” autoswitch=Yes|No.
  • Substitute < Profile Name> and < Interface Name> with the actual values.
  • That’s it.

    Support us

    Winaero greatly relies on your support. You can help the site keep bringing you interesting and useful content and software by using these options:

    Solution : Restart Your Wi


    You can try to restart your modem and WiFi router in order to fix WiFi network list not showing up in Windows 10. First of all, you should turn off your WiFi router or modem and unplug the power source. Wait for quite a few seconds and then reconnect the power cable to the router or the modem again. Then switch on the router and try to connect your computer to the Internet network to see if it works. Sometimes a simple restart can effectively solve the problem.

    Read Also: How To Sync Blink Camera To Wifi

    Routers Frequency 24 Vs 5ghz Band

    Its possible that the router is configured to use the 5 GHz frequency, whereas your Wi-Fi adapter doesnt support 5 GHz. If thats the case, the specific SSID wont be visible on your computer, but seen from your latest smartphone.

    You may either purchase a new Wi-Fi 802.11ac adapter or configure the router to broadcast in the 2.4 GHz frequency.

    How To Set Up Wifi Direct On Windows 10

    Using WiFi Direct has many advantages. It is easier and more efficient than Bluetooth and can easily handle transferring large amounts of data. With WiFi Direct, you will be able to connect your PC to any device you want and enjoy faster wireless connectivity and more productivity.

    Let’s take a look at the steps needed to use WiFi Direct on your Windows 10 computer.

  • Turn on the device you want to connect to your PC. Navigate to Settings Network & Internet and select Manage WiFi Settings.
  • Browse through the menu to discover the Wi-Fi Direct alternative. Enable Wi-Fi Direct following the specific instructions for your device.
  • Note the Network name and the passcode. Youll need them to be able to connect to your PC.
  • On Windows 10, open the Search feature and type in wireless. Pick Manage Wireless Networks from the search results.
  • Click Add, and then choose the Wi-Fi network of your Wi-Fi Direct device and enter the passcode. Your PC is now connected to the Wi-Fi Direct network.
  • Also Check: How To Sync Blink Camera To Wifi

    How To Check If My Pc Is Compatible With Wifi Direct

    Not sure if your device meets the requirements for WiFi Direct? Don’t worry. There’s a quick method to test if you’re able to establish these connections. Let’s get to the step-by-step instructions.

  • Open the search bar in your taskbar by clicking on the magnifying glass icon. You can also bring it up with the Windows + S keyboard shortcut.
  • Type PowerShell in the search box. When you see it in the results, right-click on it and choose Run as Administrator. If you need help, check out our How to make a local user an administrator in Windows 10 guide.
  • When prompted by the User Account Control , click Yes to allow the app to launch with administrative permissions.
  • Once the PowerShell window is open, type in the following command and press Enter to execute it: ipconfig /all
  • A list of all your network adapters and connections should appear in the PowerShell window. If Microsoft Wi-Fi Direct Virtual Adapter is in the list, then your PC supports WiFi Direct connections.
  • If you don’t see the WiFi Direct adapter in your list, then youll need to acquire and attach a USB device that’s capable of WiFi Direct. This process may be familiar if you’ve used Miracast in the past. We recommend TP-Link TL-WN725N WIRELESS N Nano USB Adapter is one of the Microsoft certified Wi-Fi adapters that supports Wi-Fi Direct.

    How To Turn Your Macos Into A Wifi Router

    How To Turn On WiFi On Windows 10 | WiFi not working | WiFi turned off

    macOS allows its users to create a mobile hotspot similarly to Windows 10, the only difference being that users can share only a wired Ethernet connection.

    Windows 10 make it possible for its users to connect to an existing Wi-Fi network and then use the same wireless adapter to share that internet connection. However, macOS does not have this functionality. This means that you will be limited either to sharing your computers internet connection coming in through its wired Ethernet port or having two wireless adapters.

  • Once you have clicked on the Apple menu, select the System Preferences option.
  • Under the category of System Preferences, click on the Sharing option.
  • On the dialog box that appears, click on the Internet Sharing option on the left.
  • Then select Ethernet on the drop-down box that reads Share your connection from.
  • In the box below, that reads To the computers using select your Wi-Fi adapter. This option will only be displayed if your computer has a wireless adapter.
  • To further configure your hotspot, select the Wi-Fi Options tab at the bottom of the page. You should then be able to select a name and for your Wi-Fi network as well as pick a channel.
  • In the Security box, the best option to choose is WPA2 Personal. This will allow you to have a password for your Wi-Fi Network. The password you select must be at least eight characters in length. If you choose not to have a password, anyone will be able to connect to it.
  • Also Check: How To Sync Blink Camera To Wifi

    Solution : Click The Toggle To Enable The Wi

    Step 1: Press the Windows Key + I key simultaneously on the keyboard to open Settings.

    Step 2: Select the option of Network & Internet from the list.

    Step 3: Choose Wi-Fi on the left pane, and click the toggle to enable Wi-Fi. Now you can try to connect to the Wi-Fi network. This time the WiFi network may show up.

    Solution : Check The Wifi Card

    If your motherboard comes without a built-in wireless card and you have bought a Wifi card for the system separately, this solution is for you. Before you get into the other solutions, please make sure that you have connected the wifi card correctly as in the case of incorrect connectivity, the card wont be detected by Windows and you will get the said problem.

    If you are using a laptop or your motherboard comes with built-in wifi, jump to the next solution.

    Recommended Reading: Can You Have Two Wireless Routers In One House

    Restore Bios Settings To System Defaults

    Here are the steps for this fix:

  • Shut down the PC
  • Unplug the power from wall outlet. If it is a laptop, remove the battery as well
  • Wait for about 5 minutes
  • Fit your battery back. Then plug your power back on
  • Boot your computer to BIOS. If you dont know how to do this on your computer, click this link How to Boot to BIOS in Different Computers.
  • *On the BIOS, locate a place to reset BIOS settings to system defaults. Save your changes. Then boot to Windows.
  • When your computer boots and you login, check your Wifi. If your Windows 10 Wifi still wont turn on, try my last recommended fix

    Router Ssid Broadcast Is Hidden

    How to schedule Wi

    If the router is configured to hide the SSID broadcast, devices cant see the SSID in the list of networks.

    However, users can connect to the hidden Wi-Fi network manually. You can create a new Wi-Fi network profile using the GUI. And connect to it on-demand any time using the following command if you want:

    netsh wlan connect name=

    Or, if youre in charge of the router, you can uncheck the Hide SSID or similar option in the router administration window.

    Recommended Reading: How To Connect Canon Mx492 Printer To Wifi

    How To Get Wi

    It is possible to get Wi-Fi in your home even though you may not own or have a router. The easiest way to go about it is to make use of a feature known as a mobile hotspot on your computer or laptop. In this day and age, most computers and laptops come with this feature built-in for free.

    When many people hear the term mobile hotspot, they quickly think of the mobile hotspot feature that is present on most smartphones. Usually, this feature on your smartphone allows you to tether your computer or laptop to your smartphone to access your phones data connection using your computer.

    This mode of internet connection comes with several drawbacks. First, you quickly find out that your data charges will skyrocket as this system tends to use up your data allotment faster than you might expect. Second, for this kind of hotspot to function without any hitches, your mobile data reception signal must be strong, otherwise, you may not even be able to turn on this feature on your smartphone.

    The mobile hotspot feature on your computer or laptop enables it to act as the router itself and thus share its internet connection. This internet connection that you will be able to share could be in most cases be a DSL or Cable service of your own, or even another Wi-Fi connection that you may have access to.

    From Advanced Network Settings

    Step 1: Open Advanced network settings

    Press Win + I keys together on your keyboard.

    Then, Click on Network & internet> Advanced network settings as shown below.

    Step 2: In the Advanced network settings window

    To enable Wi-Fi, Click on Enable button as shown below.

    To disable Wi-Fi, Click on Disable button as shown below.

    This allows you to enable / disable wi-fi on your windows 11 system.

    Thats all folks!

    Hope this article was informative and let us know which method you liked by leaving comments below.

    Thank you for reading this article.

    You May Like: How To Sync Blink Camera To Wifi

    Enable With Laptop Wi

    Some laptops have an On/Off button or switch for the Wi-Fi connection, like the button shown in the picture. It is usually found on the front edge of the laptop or above the keyboard. Find the button or switch, and make sure it’s enabled. When enabled, the button should be illuminated as blue, or the switch should be in the On position.

    How To Enable Wireless Display Feature In Windows 10

    How to Enable WiFi on Windows 10

    In Windows 10 Wireless Display Optional feature adds the Connect app in Windows 10. This apps allows users to Mirror the screen of any devices like laptops, tablets, and Smartphones to your computer screen. Projecting to this PC features uses connect app in Windows 10, that allows you to wirelessly project your Windows Phone, another PC, or Android devices to the screen of your PC. Also, you can use its keyboard, mouse, and other device and control it easily with your PC. Starting from Windows 10 version 2004, the connect app for wireless projection which is using Miracast is no longer installed by default in Windows 10. This app is moved to an optional feature, if you want you can enable this feature. This article will guide you to Enable Wireless Display feature in Windows 10.

    Don’t Miss: How To Connect Roku Tv To Wifi Without Remote Iphone

    Things You Need To Know

    Although the wireless Hosted Network feature in Windows 10 allows you to implement an access point solution to share an internet connection with other devices, it’s not meant to be a solution to replace a physical wireless access point.

    Also, there are a few things you want to consider. For example, wireless speeds will dramatically be reduced compared to the rates provided from a physical access point. Perhaps it would not be a big deal for internet browsing, but downloading or transferring big files could be an issue for some users.

    You also need to consider that your computer needs to be always turned on to act as a wireless access point. If the computer enters into sleep, hibernate, or restarts, your wireless hotspot will stop working, and you will need to start manually the feature using the NETSH WLAN start hostednetwork command.

    You cannot run a SorftAP and ad hoc at the same time on Windows. If you need to create a temporary network connection between two computers, setting up ad hoc will turn off SoftAP you can run one or the other, not both at the same time.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox