How To Widen Wifi Range

How To Extend Wi

How to Extend Wi-Fi Range on the CHEAP

Now that Wi-Fi is becoming an integral part of just about every new piece of consumer electronics, and even many appliances, it is more important than ever to have a usable wireless network throughout your home and office and possibly your yard. Unfortunately, the typical ISPs simplistic model of providing a single all-in-one modem+router+wireless gateway for your site quickly breaks down when faced with the real-world challenges of serving larger, or sprawling, homes or apartments. This is especially true for buildings with lots of wiring in the walls, lath and plaster walls, or metallic heating or air conditioning infrastructure in the floor or ceiling. The good news is that there are several ways to solve this problem, with varying costs and complexities. Well walk you through the available options and provide some perspective on which may be best for you.

Solution 5configure A Wireless Distribution System

Wireless distribution system is a system that can expand wireless networks using wireless APs without cables. You are able to bridge two access points to make up the area where the wireless signals can not cover at your home or office. In a WDS, one access point can act as a wireless base station that connects to the Internet and connects to clients wirelessly or with wire cables. Another access point receives the wireless signal from the wireless base station and sends signals to the other clients, where the first access point is not accessible because of low range.

How To Fix Wi

The good news is that people fix Wi-Fi dead zone issues all the time. Businesses broadcast Wi-Fi in large areas with complicated layouts every day, so it’s not impossible to bring your Wi-Fi into the backyard. Or the attic. Or your bedroom.

Here are three steps you can try to fix the Wi-Fi dead zone issues at your house. Start with the first one and if it doesnt help, move to the next, and so on.

  • Move your router. You want your modem and router next to each other and as close to the middle of the house as possible.
  • Change your wavelength. 2.4 GHz covers a wider area, but it isnt as fast. The 5 GHz wavelength is faster, but it doesnt go as far and doesnt pass through walls as well as 2.4 GHz. You can try switching from one to the other to see if you get better results. Didnt know you could switch? Try it.
  • Get a wireless range extender. You can position an extender midway between a dead zone and the router, acting like a bridge between rich Wi-Fi areas and dead zones.
  • Without additional help from boosters and such, a router can broadcast a signal within a limited area of about 150 feet . Boosters, extenders, and repeaters can spread your Wi-Fi signal much fartherup to 2,500 feet.

    To picture your router’s built-in Wi-Fi range, think of a 150-foot bubble around your router. This includes up, down, and side to side. Anything outside that bubble wont get Wi-Fi.

    Recommended Reading: How To Set Up Google Home Wifi

    See Who’s On Your Network

    Windows users can download a free, portable program called Wireless Network Watcher , which will provide a list of every device currently connected to your network, so you can identify the ones that belong to you.

    To use Wireless Network Watcher, just launch the program, and it will immediately begin scanning your network. This will take a minute or twoyou’ll know it’s working if the bottom-left corner reads “Scanning…” Once it’s done, that message will disappear, and you’ll be presented with a full list of connected devices.

    The resulting list may look a little cryptic, especially if you aren’t super tech-savvy, but don’t worry. You can ignore the IP address and MAC address listings for now. If you’re using Wireless Network Watcher, just focus on the Device Name and Network Adapter Company columns.

    For example, I see an item named “Dulce” in Wireless Network Watcher, which is the name of my wife’s MacBook. I see another with no name, but with “Philips Lighting BV” as the network adapter manufacturer, it’s probably the hub for my Philips Hue lights. You can double-click on a device to add “User Text” that helps you identify each device and narrow down all the items in this list.

    How To Pick The Right Wifi Extender

    How to extend Wi

    Lets look at some basic points to consider when choosing the right WiFi Extender to work with your Router.

    Frequency Single 2.4GHz or Dual Band 2.4GHz and 5GHz support. Majority of WiFi range extenders works on the single 2.4GHz frequency spectrum. More expensive WiFi extenders support both 2.4GHz and 5GHz. You may choose to save some money by going for the single band. If you router supports Dual Band and you wish to take advantage of this then the more expensive dual band extender may be for you.

    Standards Compatibility IEEE 802.11 a/b/g/n orIEEE 802.11 b/g/n orIEEE 802.11 a/b/g/n/ac compliant. Standards compatibility is somewhat linked to the frequency and age of your router. The easiest thing is to look at the specifications of your router and check the standards that it supports. If in doubt, choose a universal extender that works with any 802.11 a/b/n/ac routers. Compatibility is key to ensuring better integration between your router and the range extender.

    Profile Desktop or Plug based, no external antenna, dual antenna or more, these are some of the considerations in terms of physical outlook of the device. Wall plug based WiFi range extender take the least amount of space as all you need is a free socket on the wall. More advanced WiFi extenders are designed for the desktop. In many ways, it looks like another router with either external antennas or built-in antennas. Place it on a flat surface taking up a bit more room.

    Also Check: Can You Have 2 Routers In One House

    Extend The Range Of Wifi Signals With Hardware

    If your router is placed on the ground floor of your home, the Wi-Fi signals will be very weak or may not even reach the basement computer or the upstairs. The situation will be no different if you work in a fairly large premises or if there are too many walls in the area.

    In that case, here are some hardware device that you can consider to extend the reach of your Wi-Fi network:

    Option #1. You can attach a WiFi Repeater to your router and quickly expand the coverage of your wireless network without using any cables.

    The Repeater should be placed within the range of your existing router and it will reflect the signals to other areas where the wireless reception was earlier poor . The Repeater can connect wirelessly to both routers and access points .

    Option #2. You can get another wireless router and connect it to your existing router using an Ethernet cable. The advantage is that this setup comes pretty cheap and the Internet speed stays almost the same even for computers that are accessing the web via the new router.

    You can get a 100 feet long Ethernet Cable for less than $10 and wireless routers start at $20. Heres a detailed guide on how you can connect two routers together.

    Option #3. You also have the option to use an Access Point instead of a router to extend the WiFi range but thats often not required because Wireless Access Points can be more expensive than equivalent routers.

    More tips on Home Networking:

    Use 24ghz Instead Of 5ghz Wi

    Wi-Fi can use one of two frequency bands: 2.4GHz or 5GHz. Many people think the latter is better because it offers faster speeds.

    However, this comes at a price: range. The higher the frequency, the shorter the wavelength. And 5GHz signals cannot penetrate walls, ceilings, desks, and, yes, people as well as 2.4GHz signals. (Incidentally, this is why 5G is promising such fast speeds, because it uses much higher frequencies – called millimetre wave – but these signals have a tough time getting through glass, trees and even rain.

    2.4GHz, on the other hand is better at delivering a signal over a greater distance, at slower speeds. That’s why you might be able to get better range from your router by forcing your phone or laptop to connect to your router’s 2.4GHz network. Many routers combine the two frequencies into one network name. That’s done for convenience, but it means you can’t choose which network to connect to.

    If your router is like this, log in to the settings web page and look for a Wi-Fi menu where you can split the two frequencies into two separate network names.

    It’s worth bearing in mind that 2.4GHz devices face a battle because lots of other things also use this frequency including microwaves, baby monitors, Bluetooth and more.

    So your mileage may vary, but it is well worth understanding the difference between Wi-Fi bands, as you can use these to your advantage.

    Don’t Miss: 2 Routers In One House

    Easy Tips To Increase The Range Of Your Wireless Router

    The range of a typical home wireless router like Linksys is around 100 feet. There are lots of other factors that can lower this range decreasing signal strength lower than you want. The most important being obstacles that stand between your wireless router and your laptop or computer.

    Fortunately, there are simple tricks you can use to boost the signal of your wireless network . Try some of these tips for extending your wireless range and improving your wireless network speed and performance.

    Wire Additional Wireless Access Points

    How to Extend WIFI RANGE and Get FASTER Internet

    The most reliablebut usually the most difficultway to extend your Wi-Fi coverage by double or more is to wire in additional wireless access points . This method is similar to using HomePlug or MoCA adapters, but it usually offers better connection speeds and performance. However, it requires running an ethernet cable from the router to each additional AP. So if your home or building isnt already wired with ethernet jacks, this can be quite an involved project.

    When shopping for an AP, keep in mind it is different from a wireless router. You only need one router in a home or building, so purchase an AP instead of a router when you want to extend your Wi-Fi coverage. The router is basically the network controller, and it hooks up to your Internet modem or is integrated with it. An AP doesnt include any network control capabilities it connects to the back of a router to simply provide additional wireless access. Good luck!

    Note: When you purchase something after clicking links in our articles, we may earn a small commission. Read ouraffiliate link policyfor more details.


    Read Also: Can Blink Cameras Work Without Wifi

    Why Would You Need To Extend The Wifi Range

    There are several reasons that you might want or need to extend the WiFi range that you currently are achieving.

    • Poor planning Creating a WiFi network without adequate planning can result in poor coverage and can negatively impact your users. All users need access to a strong WiFi signal in order for your network to operate successfully. Later in this article, we will look at how a WiFi tool like NetSpot can help alleviate this type of problem.
    • New requirements This issue can arise in a business setting where additional space is used to house new employees. Despite your best previous efforts in sizing your WiFi network correctly, you now may be faced with the problem of figuring out how to extend the WiFi range to accommodate the influx of new users.
    • Inadequate signal You can be faced with this issue no matter if the WiFi network is used for business or simply for home use. You might have issues connecting to the WiFi from certain rooms in your home. Customers taking advantage of the free WiFi offered by your coffee shop may need to avoid certain parts of your establishment.

    Wifi Fix #: Check Your Router Position

    The first thing to try is moving your router to a new position.

    Most of us tuck our router away in a corner somewhere, or even hide it inside a cupboard. But that can stop you getting a good signal everywhere in your home.

    The best place is near the middle of the property, so the signal can reach everywhere equally. And the router will work best if it is out in the open too, rather than hidden behind something.

    So before investing in any new kit, experiment with a few different places to put the router. You might find that sorts things out straight away.

    You May Like: Southwest Airlines Internet Access

    Extend Signal From Inside To Outside

    The PiFi Outdoor WiFi Extender is an access point that boosts WiFi signal from inside to outside up to ½ a mile.

    Heres how it works:

  • All equipment is installed outside the home or building.
  • The access point connects to your router and the outside antenna.
  • The outside antenna broadcasts WiFi signal outside!
  • Because building material is the number one cause of poor signal, think of the PiFi Outdoor WiFi Extender as a very long straw that allows a long distance location to take a sip of the signal.

    The PiFi Outdoor WiFi Extender comes with the option to choose a directional, omni, or whip antenna.

    The most important factor is choosing the right antenna:

  • Directional Antenna: Up to ½ mile.
  • Omni Antenna: Up to ¼ mile.
  • Whip Antenna: Up to 100 yards.
  • Its recommended to go with a directional antenna, especially if you know which area you want to cover and its a bit far from your home or building. It’s a specialized performer.

    Omni and whip antennas broadcast in a 360 field, but don’t reach as far as the directional. They’re generalists.


  • Great for: Farm, yard, pool, and outdoor spots.
  • Works for all ISPs: Comcast, Charter, AT& T, Verizon, CenturyLink, Cox, Altic, Mediacom, Windstream, and many more internet service providers.
  • Compatible with most routers.
  • More Info:

  • When installing the antenna, the higher, the better. A clear line of sight immensely helps with better WiFi signal, speeds, and service.
  • Installation takes about 30 mins to an hour.
  • Mesh Of Access Points

    How To Connect Two Routers Without Cable To Extend WiFi ...

    If youre willing to invest the time and money, and have wired Ethernet throughout your home or office, then a mesh-like solution of APs is the way to go. Mesh solutions can be administered from a single location, and provide the best options for optimum channel management to avoid interference between units. Until recently, mesh AP solutions were expensive, and a bit tricky to administer because they have traditionally been marketed to larger enterprises. Now though, tech-savvy users can get excellent price-performance from products like Ubiqutis Unifi wired Access Points.

    Unifi Access Points come in a range of prices and performance levels, and can be powered over their Ethernet connection . Unifi offers a powerful, centralized, management console, but it requires a little effort to understand how to use it properly if youre not an experienced network administrator. The units do a great job of managing radio channels and handing off clients between each other something that most of us have had to do manually until now. My only gripe is that they dont offer any additional LAN ports, so if you need both to connect both wired and wireless devices in a particular location youll need to add a small hub.

    Read Also: How Do I Change My Wifi Password Optimum

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox