What Does Wps Mean On Wifi

What Are The Disadvantages To Wps

Wireless Networking – What Is WPS?

WPS is a very useful way of setting up a home network fast, but it’s not perfect. Here’s what you need to know about the disadvantages.

  • It’s not 100% secure. In the past, there have been brute-force attacks that have led WPS to be open to attack. It’s unlikely you’ll be a victim, but it’s why many people disable WPS entirely.
  • Anyone can activate it. If someone has physical access to your router, they can easily activate WPS right down to the PIN often being displayed on the top of the router. It might only be activated for a few minutes but that can make all the difference. You need to have the device stored somewhere securely.
  • It doesn’t work with WEP security protocol. WEP is the oldest security protocol out there. It’s been superseded by WPA2 but some users with old network hardware might still need to use WEP. It doesn’t play nicely with WPS so don’t expect to be able to use the WPS button.

What Is The Wps Pin

The WPS PIN has eight digits, and it can be generated both by the router managing the Wi-Fi and by the client who wants to connect to it. You can see an example of the WPS PIN generated on an ASUS router in the screenshot below.

The WPS PIN on an ASUS router

This PIN can be used in the connection wizard of the device that wants access to the Wi-Fi. Alternatively, devices with WPS support can have a sticker on them with their eight-digit WPS PIN that can be entered in the routers administration interface.

Why Wps Flashing Red On Your Router Or Modem

So, in simple words, WPS flashing red means the device had failed to connect to the Internet or is awaiting a connection.

Same as the power, internet, and Lan light of a router and modem, there is WPS a light. Different color of light has additional significance in WPS light as well. Ideally, there are three stages.

  • Green: Your routers WPS is ready to connect with other devices.
  • Amber/Yellow: A device is trying to establish a connection through WPS.
  • Red: A device has failed to establish a connection through WPS. Or there could be a session overlap.

Also Check: Optimum Wifi Username And Password

What Is A Wps Button On A Wifi Router

The WPS button on a Wi-Fi router allows a user to connect to a wireless network without needing to enter a security code. WPS stands for Wi-Fi Protected Setup and works only on networks using WPA Personal or WPA2 Personal security.

The WPS button is most useful for connecting devices to a Wi-Fi network when the security code is not available. There is typically a very short window of time after pressing the WPS button during which the device can connect without a security code. While routers with a WPS button make device connection quick and convenient, there is also some security risk involved.

What Is Wps Button How To Use It To Connect To A Network Wirelessly

What Is WPS and How Does It Work?

There are potentially endless reasons why you would love to have a router in your home. One of the major reasons for having a router is that it literally allows multiple users to connect to the Internet. To connect your device to the Internet, you must always have a public IP address that is unique. This only implies that Internet providers only provide a single IP address or charge lots of money for a relatively large amount of publicly routable addresses. Thankfully, the use of routers allows users to connect to an internet source by using a router machine that features NAT. This enables your router to utilize the single public IP address plus a broad range of UDP ports for connection.

It is also important to note that routers have the possibility to connect different networks such as various architectures including Token Ring and perhaps Ethernet. Routers can potentially help to reduce network traffic by creating broadcast domains and collision domains. Simply, put, you have every reason to purchase and use a router.

Most of us will always find it fairly easy to set up a Wi-Fi router. Most routers today are easy to set and operate, and you only need to correctly use the online manuals and various Web interfaces to set one. If you have been using a router for a while, you may have come across the WPS button.

You May Like: How Wifi Hotspot Works

What Is Wifi Protected Setup

WPS makes a connection between the wireless device and the router easier. It works with wireless networks only. It requires a password and its encrypted with WPA2 security protocols. A WPS does not work if your wireless network uses WEP security protocols.

It allows you to skip the process of connecting to a network and entering a password. This technology makes it easier to configure a wireless network using a network name and password. It also creates a secure WPA data encryption and authentication.

Connection At The Press Of A Button

WPS is a convenient way to connect your devices to your router, but it can pose a security risk. It’s a good idea to turn off WPS functionality once all your devices are connected and allow guests to connect via a guest network, so your private devices stay safe.

If you’ve decided to disable WPS, why not go one step further and hide your entire Wi-Fi network too? It’s a lot harder for a hacker to get into what they can’t see, after all.

Image Credit: Hadrian / Shutterstock.com

Read Also: Do Southwest Airplanes Have Wifi

How Do I Set Up Wps On The Virgin Hub

WPS is normally set up by default if you have Wi-Fi switched on. If you find its not working, first access the Virgin Media Hub settings.

Once youre in those, click Advanced, then Wireless, then WPS. You should see a menu like this:

Make sure the WPS Push button setting is enabled, as shown here.

If you wish, you can choose to protect WPS with an eight-digit pin that has to be entered on any device youre connecting. This can make connecting to other devices more difficult and wed only use it if your Virgin Media Hub is easily accessible to strangers for example, if youre running a guest house or B& B.

When To Avoid It

Wireless Networking – A Demonstration of WPS

If you have any visitors in the house, it is better to avoid using the WPS. Anybody within the vicinity of the router can connect to it. In case your home is full of guests, and you are trying to avoid sharing the password separately. Using WPS might seem easier here, but it is not appropriate.

The guest devices might infect your home network. If the guests are your neighbors, they could start leeching on your bandwidth even after they have left the house. Guest network access is designed for this purpose. It isolates external devices from infecting your home network, and you can switch the guest Wi-Fi off later to prevent any misuse.

Don’t Miss: Can I Have 2 Routers In One House

How To Connect To A Wi

Unfortunately, not every Wi-Fi device will work with WPS. Old systems designed before WPS won’t understand what it is, and some modern-day devices don’t bother with WPS.

You’ll know if a device is compatible with WPS if it gives you the option to use it when you set it up. After you select the router you want the device to connect to, it’ll ask you to either give it a password or to press the WPS button on your router.

If the latter option appears during setup, keep the page open and press the WPS button on your router. Your route will then begin looking around for devices that want to connect to it. Hopefully, it should find yours and bring it onto the network without requiring a password.

It’s worth noting that changing your router password may boot off all the devices connected to it via WPS. If you try to reconnect, your device will claim that its credentials are now incorrect.

To solve this, you can set your password back to what it was, and everything should reconnect again. If you don’t want to do that , you can tell your device to forget the router, then reconnect using WPS again.

It’s also handy to keep this tip in mind if you suspect someone connected to your router with WPS without your knowledge. Just change the password, and you’ll lock out everyone who got on without your permission.

How Does It Work

Over the years, wireless networks have evolved. Traditionally, a user had to manually create an SSID name. Then, it was required to manually enter the security key on the access point as well as the clients end. This was mandatory to prevent unwanted access to the network.

If you dont have background knowledge of WiFi devices, you cant configure the device. No non-technical user can comprehend this. If you are not familiar with IP address conflict, its highly likely you wont know how to configure devices.

Read Also: How To View Wifi Password On Mac

How To Use The Wps Button On Your Modem To Connect To Wifi

There are two ways to connect your wireless devices to your home WiFi network: by using the WiFi password or by using the WPS button on the router.

Instructions may vary slightly by router and device, but generally, here’s how WPS works:

1. Push the WPS button on the router. The button will typically begin to flash amber/orange, letting you know it is searching for a device to connect.

2. In the device’s WiFi settings, locate and select the name of the wireless network you’re trying to connect to. It should complete the connection without entering a password.

Advantages And Disadvantages Of Wps

What Does WPS Mean? (and why you should disable it)  Bonkers About Tech

Below are the advantages and disadvantages :


Below are the advantages:

  • New devices are automatically configured into the network and they are logically connected with least efforts by the users
  • Users need not have to know SSID and authentication key and WPS inducts the new device automatically using the authentication key and use this key for future connection
  • The password cannot be hacked as the line is opened temporarily for a very short time and the line is closed once the connection is successful. The password is generated then and there randomly and no one can crack
  • No need for the users to enter password
  • Information exchange between device and access point happens through Extensible authentication protocol one of the safest
  • WPS encourages more and more usage due to its simple and easy operation especially in the home
  • Disadvantages

    Below are the disadvantages:

  • Devices connected directly, bypassing the access point, are not supported. It will not support any ad hoc
  • It supports WPS certified and WPS compatible devices
  • Users will face difficulty in connecting non-WPS devices
  • Vendor support is not adequate as WPS is the evolving new technology
  • There are security issues in some of the routers and users were asked to switch off WPS facility in such
  • Recommended Reading: Wifi Extenders That Work With Spectrum

    Wps Password Security Requirements

    WPS is available only for wireless networks that require a password and are encrypted with the WPA/WPA2 or WPA3 Personal security protocols. WPS doesnt work on wireless networks that use the deprecated WEP security, which can be cracked easily by any hacker-wannabe with a basic set of tools and skills.

    What Will Happen After You Disable Wps On Your Wi

    WPS is a great example of the trade-off between convenience and security. WPS was designed with convenience in mind, which means that it also compromises your security. WPS works by allow us to join a wi-fi network without needing to know the network password. You simply push the WPS button on the router, join the network and youre in. Unfortunately, WPS is horribly insecure and can be used as a means for attackers to gain access to your network. This is why we disable WPS. Once disabled, youll need to use the conventional password method to add additional devices to your wi-fi network but your router will no longer be vulnerable to a WPS attack .

    Read Also: Two Wifi Networks In One House

    What Does Wps Mean

    WPS is a method of setting up a secure Wi-Fi network at home with the minimum of effort. It typically involves pressing down the WPS button on your router to activate it.

    The WPS button on many routers was created by the Wi-Fi Alliance in 2006. Its aim was to help home users who didn’t know much about network security, set up their home wireless networks safely and securely. While many users might have wondered ‘what does the WPS button do?’, it was a far simpler process for set up than having to dive into complicated network settings elsewhere.

    What Is The Wps Button On A Router

    Whoa, Pretty Simple: Wi-Fi Made Easy With WPS

    Aaron DonaldRead moreMarch 11, 2022

    If youve taken a close look at your router, you might have spotted a strange button labeled WPS. These initials stand for Wi-Fi Protected Setup. WPS is a convenient utility that enables you to connect devices to your router without entering a username and password. Its a great way to avoid having to remember these annoying details.

    Your router comes with a password that consists of random numbers and letters strung together. While this code may be challenging for hackers to crack, it can be frustrating to input this password when connecting your devices to wireless internet. Using the WPS button means that you can bypass this process and link your devices with the touch of a button.

    Here, we will explore what the WPS button on your router does and how you can utilize it to connect your devices to the internet with ease.

    Also Check: Blink Camera Reset

    Should I Use Wps On My Modem

    There are pros and cons to using WPS. Here’s a quick overview of them.

    • It’s straightforward. Rather than needing to enter long passphrases to connect your devices, you can press a button and join networks within seconds.
    • It’s quick. If you’re trying to add multiple devices to your network, you can tap the WPS button, and you’re good to go for everything from your smartphone to your smart TV or other devices.
    • It’s not 100% secure. There have been some brute-force attacks that have led WPS to be open to attack. It’s unlikely you’ll be a victim, but this is the reason why security-conscious users disable WPS entirely.
    • Anyone can activate it. Anyone with physical access to your modem can start WPS within seconds, so you need to have the device stored somewhere securely.
    • How do you change WPS on your modem?

      Changing WPS settings is done through your modem’s settings. How to access these settings and what you can change will depend on your specific modem. Search for your modem online and consult its manual to learn how WPS works on your particular modem.

    • How long do I have to press the WPS button?

      You only need to hold down the WPS button for 2-3 seconds. If nothing happens within a few seconds, there’s likely a problem with your device.

    • Is the reset button the same as the WPS button?

      On some devices, the reset and WPS buttons are the same. If you don’t see a separate reset button, you can reset your device by holding down the WPS button for 10 seconds.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox