What’s My Wifi Ip

How To Find Your Router’s Ip Address On The Router Itself

How do i find my wifi IP address

Many wireless routers have their IP address or an URL that leads to their IP address written on the back or bottom. Go to your router, and look on all its sides. You should find a sticker, like the one on our ASUS RT-AX82U. There should be an entry like the one we highlighted in the picture below.

The Router IP address on an ASUS RT-AX82U

TIP: If you have an ASUS router with Wi-Fi 6, the default IP address is If you have an older router with Wi-Fi 5, the default IP address is

Finding Ip Address Of Router

First, you need to access your WiFi router by locating the IP address of your router. Most of the time it is either or

However, if you need to figure out the IP, here’s how:

In Windows you will need to load up a command prompt and enter ipconfig. Mac users will use netstat -nr and Linux users will use route. You will see something similar to the image below in Windows. What you are looking for is the Default Gateway. My router IP is

Find Your Ip Address Using The Command Prompt

You can quickly get your local IP address on your computer with the Windows Command Prompt tool. Itll show you both your IPv4 address as well as IPv6 address. Heres how to find your IP address using CMD:

  • Open the Start menu and type cmd to open the Command Prompt.

  • Type ipconfig into the Command Prompt and press Enter. The tool will return a set of data that includes your IP address.

  • Recommended Reading: Google Wifi Access Point Mode

    What Is The Difference Between Ipv4 And Ipv6

    IPv6 stands for IP Version 6. This newer implementation enables a wider scope for issued addresses. In total there can be 2^128 addresses. These are generally displayed in a hexadecimal format. Since the amount of addresses within the IPv4 format is limited and more and more devices worldwide are being connected to the internet and new format had to be introduced. IPv6 enables a wider range of addresses and ensures, that new devices can be connected to the world wide web.

    Beef Up Your Network Security

    proIsrael: Whats My Wifi Ip

    Even if you discover that a neighbor is stealing your Wi-Fi, you don’t need to hunt them down and start a fussyou can just kick them off with a change in router security. Head back to your router’s web interface and find the option to change your password . If you don’t have a password, you absolutely need to start using one, and it needs to be strong. Without a password, your personal information is up for grabs to any amateur hacker that drives by. Choose WPA2 for the password type, since it’s far more difficult to crack than the now-outdated WEP.

    If WPS is turned on, you should turn it off, since this feature makes it easier for people to crack your Wi-Fi password. If you want to let guests on your Wi-Fi without giving them access to your devices and information, you can always enable your router’s guest network, or simply wirelessly.

    If you already had a passwordmaybe it was weak and easy for your neighbors to guesschanging it to something new should be sufficient to kick them off. Of course, you’ll also have to re-authenticate all of your devices, but you should be able to rest a little easier knowing that all the devices on your network belong to you.

    Like What You’re Reading?

    Sign up for Tips & Tricks newsletter for expert advice to get the most out of your technology.

    You May Like: Spectrum Wireless Extender

    Did You Find Your Routers Ip

    This guide should have been complete enough to help you find the IP of your router. If you didn’t, let us know in a comment below, and we will try to update and improve our tutorial. Before you go, tell us what router you have and what is its default IP address. Were sure this information is going to help other readers searching for my router IP.

    Windows Router Setup Guide

    For Windows users, this process is relatively simple.

    • First, you will need to open the ‘command prompt.‘ Press your windows button, or access the windows start menu, then type ‘cmd’ into the search bar, this will get you to the ‘command prompt’ app.
    • A black window will now appear. Here, type in the following, ‘ipconfig.’ Some information will now appear on the screen you need to look through the results and make a note of the ‘default gateway address.’

    You May Like: Pokemon Go Not Working On Wifi

    How Do I Find My Router’s Ip Address On A Smartphone With Android

    If you have a smartphone with a clean Android 10 version that doesnt use a heavily customized user interface, as we do on our Nokia phone, it is relatively easy to find out the IP address of your router. After you connect to the Wi-Fi, open Settings, and go to Network & internet.

    On Android devices, go to Network & Internet

    Tap on the Wi-Fi entry .

    Tap on Wi-Fi

    You see the network you are connected to and other wireless networks in your area. Tap on the gear icon near the name of the Wi-Fi network you are connected to.

    Tap the name of the Wi-Fi you are connected to

    You see some information about the network. Tap on Advanced for more details.

    Tap Advanced in Network details

    Scroll down to the Gateway field, where you see the IP address of your router.

    The Gateway field has the IP address of your router

    Write it down for later use, and close the Settings app on your Android smartphone.

    Is My Public Or Private Ip Address Permanent

    What Is My Ip Address For My Router – Quick and Simple!

    No, typically all IP addresses are dynamic, meaning they frequently change.

    Public IP addresses assigned by internet providers generally last for 14 days. However, the address will change each time you reboot the device connected directly to your modem.

    Private IP addresses assigned by your router typically last for 24 hours. Again, this number may change if you reboot the device connected to your router. It will also change if you access a different network, like connecting to Wi-Fi at your local coffee shop.

    The only time your IP address doesnt change is when its a static number. Internet providers generally assign static IP addresses to enterprise clients as part of a paid business plan. However, you can assign static private IP addresses to your devices through the router if you need to forward specific types of data.

    Read Also: Can I Have 2 Wifi Routers In My House

    Find Your Routers Ip Address From The Powershell

    Like the previous method, you can also use the PowerShell to find your wireless routers IP address. Start PowerShell and run this command: gip | findstr /R Gateway

    PowerShell lists the Default Gateway used by your computer.

    Find the router’s IP from PowerShell

    The IP address of the Default Gateway is also the IP address of your router. This method also returns a reliable result, even if you have manually changed the DNS settings in Windows.

    Why Do I Need To Know My Ip Address

    So, your IP address is basically your footprint. Youâll need it for your internet to work correctly. Thatâs because all networks work using protocols to allow for access and interaction with the greater internet. You can think of your IP address as a little tracker that shows the internet where youâve been and what youâve been doing. It also reveals your location. Sounds spooky? It can be. Thatâs why a lot of people hide their IP address â more on that in future posts.

    You May Like: Activate Spectrum Net Self Install

    Using Your Wireless Router

  • 1Open a browser. You can use a web browser to log in to the web interface for your wireless router. You can use the web interface to set up and configure your wireless network and check who is connected to your wireless router.
  • 2Type the IP address of your router in the address bar. This takes you to the web interface for your wireless router. The IP address for your wireless router is going to be different from one make and model to another. Consult the user’s manual or the manufacturer’s web page to find the specific IP address for your wireless router.
  • Common router IP addresses include, and
  • You can find your router’s IP address using the Command Prompt on Windows. Open the Start menu and type CMD
  • And What Is The Netmask

    Whats My IP for Android

    The netmask allows the same IP address to be used for two devices. For example, you could have the address under two different masks making them serve to identify both. The masks are also those that allow to separate the networks in the different categories that we have already explained. The netmask is the one that dictates how many networks can be created and how many hosts can exist according to the kind of private IP we have. Remember that we already know what the types of IP classes are, we saw them above. As a general rule and sure that you have seen it thousands of times, the main network mask that exists is , which is the one assigned to type C networks .

    • For class A IP addresses :
    • For class B IP addresses :
    • For class C IP addresses :
  • Get the Nordvpn coupon here or use the Divi Discount if you are looking for a good wordpress page builder.
  • Without entering into a lot of very technical data or the reason, blocks 255 represent the amount of networks that can be and the numbers 0 how many hosts there can be . It is not that there can be 255 networks and 0 hosts. That is the human translation so that we can understand that if we translate to binary code, it will be such a code: 111111111111111111111100000000 . Would you remember that number of bits of the binary code? Those 1 and 0 are the ones that dictate the type of network, the limit of networks that may exist and the hosts that may exist .

    Also Check: Will Blink Cameras Work Without Wifi

    How To Find Your Private Ip Address In Windows 10

    The fastest way to find your private IP address in Windows is to use the IPCONFIG command. To do this, follow these steps:

    Step 1: Right-click on the Start button and select Windows Power Shell on the Power User Menu.

    Step 2: Type the command IPCONFIG into the Windows PowerShell window and press the Enter key. This will list all the Windows IP configuration information.

    The number you need appears next to IPv4 Address, as highlighted above.

    Who Is Connected To My Wifi

    The most convenient way to find whos connected to your WiFi is through the routers dashboard/web interface. By logging in to your routers web interface, you get the most accurate picture of which devices are connected to your router.

    Additionally, most modern-day routers maintain logs where a record of past and current connections, along with the IP address of every connected device and its name, is maintained.

    Software and applications such as Wireless Network Watcher and Whos on My WiFi are an easy way to find out whos connected to your WiFi network and potentially even hogging your bandwidth.

    Don’t Miss: Which Wifi Extender Works Best With Spectrum

    Find A Routers Ip Address From Online Databases

    There are several sites online with databases that include all router manufacturers and the default IP addresses used on many of their models. One site we like is . Its default router list contains data about many brands. Try it out, and see if it helps.

    Routers Login has the default IP for many routers

    One downside we noticed to such websites is that they have not been updated to include recent router models, especially not routers with Wi-Fi 6, which tend to use different default IP addresses than older models. If you have a newer router and such sites dont include your specific router, the other methods we presented should help.

    Logging Into The Router

    How do I find my ip address of a LAN or WiFi card

    Once you get the default gateway you need to enter it in to your web browser’s address bar. Once you enter the address, a login screen or prompt will appear. You will need the username and password for your router.

    Common router default usernames and passwords are:Linksys Use admin for both username and password.Netgear Use admin for username and password for the password.

    If you used the default username or password, the next step would be to change the default password. In the “Administration” section of the Linksys router you will find “Management,” as seen below. In the “Management” area you can change your router access password. Make sure to keep track of this password. If the password is lost you will have to reset the router to factory defaults and lose all your settings. Once this is finished, be sure to save your settings.

    Recommended Reading: Google Wifi Tips

    Set A Static Ip Address On Your Computer Or Smartphone

    If you ensure the IP address of your modem or router is correct, then you can set a static IP address on your computer or smartphone to tell it where to connect to. This method also helps to avoid the 169 IP address error.

    To do so, go to your network settings and follow these instructions:

    • IP address: The IP address for your computer or smartphone.
    • Subnet mask: Often
    • Default gateway: This is your routers IP address, often is

    If you dont know where to find network settings on your device, watch the video below:

    Find Your Routers Ip Address On Windows

    Your routers IP address is the Default Gateway in your network connection information on Windows. If you prefer using the Command Prompt, you can find the default gateway for any connection quickly by using the ipconfig command.

    If you prefer, you can also find the default gateway address through the graphic interface. First, open the Control Panel. Just click Start, type control panel, and then hit Enter.

    In the Network and Internet category, click the View network status and tasks link.

    In the upper right corner of the Network and Sharing Center window, click the name of your network connection.

    In the Ethernet Status window, click the Details button.

    In the Network Connection Details window, youll find your routers IP address listed as IPv4 Default Gateway.

    RELATED:10 Useful Windows Commands You Should Know

    Don’t Miss: How Do I Change My Optimum Wifi Password

    How To Find Your Routers Ip Address On Windows

    If youre using Windows, you canfind your routers IP address by using the Command Prompt app or the ControlPanel. From the Command Prompt app, type ipconfig, hit Enter, and yoursystem will bring up your default gateway or IP address. In Control Panel, goto Network and internet > View network status and tasks > Ethernet > Details. Here are the steps for each method.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox