Why Is My Iphone Not Connecting To Wifi

Simple Ways To Fix Your Iphone Cannot Connect To Wifi

iPhone Not Connecting To WiFi? Here’s Why & The Fix!

It can be a frustrating moment if your Wi-Fi is not working but the people around you are using it just fine. There can be a lot of reasons for it. Maybe there is some issue in your phone or maybe your iPhone or iPad cannot connect to this particular router? There can be a lot of reasons that might make you confused. All you need to do is to diagnose the real reason behind it. We are here to help you diagnose and fix this problem if your iPhone cannot connect to Wi-Fi. In this article, we are going to discuss different reasons and solutions for them to fix your Wi-Fi connectivity.

Hard Reset Your Iphone

When your iPhone not connecting to Wi-Fi, sometimes a simple âHard Resetâ can also be used to fix iPhone not connecting to the Wi-Fi issue. It needs no rocket science and obviously not much of your time. Hard resetting your iPhone many times fixes some minor issues easily. Below mentioned are the steps on how to hard reset your iPhone and get it connected to your Wi-Fi.

A. For iPhone 7/Plus or earlier

Step 1. First of all, make sure that you are logged into the network with the correct Wi-Fi password.
Step 2. Release the buttons once the Apple logo starts appearing. Now, you are good to go.

B. For iPhone 8 or higher

Step 1. Press the Volume Up button briefly post which press the Volume Down button briefly and the press & hold the âSleep/Wakeâ for approximately 10 seconds till the time you see Apple logo on your screen.
Step 2. Now you are all set to rock.

Second Solution: Restart Your Iphone Xs

Minor software errors can also affect your iPhones wireless functions on your iPhone and may result in the same error connecting to your WiFi network. If all other WiFi enabled devices can connect to your wireless network without having any problems except for your iPhone XS, then the problem is more likely within the iPhone system itself. Often times, random firmware glitches are to blame. To rectify these types of errors, simply restart your iPhone to clear out minor glitches and refresh its system. Heres how it works:

  • Press and hold the Side/Power button and either Volume buttons simultaneously for a few seconds.
  • When the Slide to Power off command appears, release the buttons.
  • Drag the power off slider to the right to completely turn off the iPhone.
  • Wait for at least 30 seconds then press and hold the Side/Power button again until the Apple logo appears.
  • Once your iPhone is finished rebooting, retry connecting to your wireless network and see if the problem is gone. If it fails again, then troubleshoot further and rule out other factors.

    Recommended Reading: Can You Have Two Wifi Providers In One House

    Toggle Airplane Mode On Andthen Off

    If you cannot connect to the Wi-Fi, there is a chance that the Airplane mode is enabled on your device. If this is the answer to the question why wont my iPhone connect to WIFI? turning the mode off should fix your issue. If the Airplane mode is currently off, turning it on and then off can still help you fix the Wi-Fi connection issues. Follow the steps below to apply this solution:

    Step 1: Visit Settings and then toggle the Airplane mode on.

    Step 2: After a couple of seconds, toggle the mode off.

    Change The Dns Settings

    Why is my iPhone not connecting to my WiFi? [Ä°phone]

    In some instances, changing the DNS settings on your iPhone could help you fix the iPhone wont stay connected to WIFI issue. You can use the Google DNS . Also, you can use the Open DNS . To change the DNS, follow the steps outlined below:

    Step 1: Go to Settings > Wi-Fi.

    Step 2: Find the network whose DNS settings you would like to change andthen tap the i button.

    Step 3: Locate the DNS. Tap on the numbers.

    Step 4: The keyboard should appear. Choose a DNS from the ones mentionedabove and enter it.

    You May Like: 2 Routers In One House

    Fix 1 Turn Off And Turn On Wi

    If your iPhone connects to Wi-Fi but no internet, you can try to turn off the Wi-Fi feature which may have some problem on iPhone, and open it again. You can find this feature in Control Center or the Settings app.

    If you choose to use Control Center, you need to run Control Center first and tap on the WIFI button to turn it off. How to launch Control Center? On iPhone SE, 8 or earlier models, swipe up the screen from the bottom. On iPhone X and later models, swipe down the screen from the upper right corner. For those who choose to use the Settings app, just go the Settings > Wi-Fi.

    Connected To The Internet

    Youve fixed the problem and your iPhone is connecting to the internet again. Make sure to share this article on social media to teach your friends, family, and followers what to do when their iPhone wont connect to the internet. If you have any other questions about your iPhone or cell phone plan, leave a comment below!

    Read Also: Dunkin Donuts Sign In Wifi

    Unable To Connect To Wifi Network

    You must be wondering why do you face the Wi fi connectivity issue with your iPhone or iPad so often?

    Dont worry you arent alone to face Wi fi connectivity issues with the iPhone. It means we all are in this, and well work together to eradicate this issue using the below methods.

    Moreover, it isnt just the connectivity issue sometimes, the connection keeps dropping, which is even more frustrating.

    We are listing down some methods to address the connectivity problem. If none of them works for you, the last resort is to either replace your modem or visit the nearest Apple store.

    First, try the below-mentioned methods at home.

    Restore Your Iphone To Factorysettings Via Itunes

    Why does my iPhone not connect to WiFi

    This option can help you fix the iPhone wont stay connected to WIFI issue. It is, however, worth noting that the solution will erase all the data you have on your iPhone. Therefore, you should consider creating a backup before applying this solution.

    To get a fresh restart with your iPhone and see if you will beable to reconnect to your Wi-Fi network, follow the steps below:

    Step 1: Ensure you have the latest iTunes version on your computer.

    Step 2: Launch iTunes on your computer and then connect the iPhone toyour computer using the USB cable.

    Step 3: When the iPhone appears on iTunes, select it.

    Step 4: In the Summary section, select the Restore iPhone option.

    Step 5: Click Restore to confirm.

    Step 7: Wait while iTunes restores the iPhone and also installs thelatest iOS version.

    Step 8: After the restore, follow the onscreen instructions to set upyour device.

    Also Check: Reset Blink Sync Module

    Are You Connected To The Right Network

    If you’re somewhere with multiple Wi-Fi networks that your iPhone could connect to like in a coffee shop or at a business your iPhone will pick the first one that pops up in the list, which is less than ideal. Head into your Wi-Fi settings and make sure you’re connected to the right network.

  • Launch Settings app.
  • Tap the Wi-Fi network you want.

  • Dfu Restore Your Iphone 12

    The final home fix we recommend if your iPhone 12 still can’t connect to a Wi-Fi network is to perform a DFU restore. This is the most complete factory reset you can perform on an iPhone. A DFU restore will completely erase all data and settings from your device, placing it back in the state it would come in out of the factory.

    When you DFU restore an iPhone, all of its code gets rewritten. This alteration may erase whatever bug is preventing your iPhone 12 from successfully accessing the internet. Check out our YouTube tutorial on how to safely perform a DFU restore from home.

    This may seem like a scary fix to attempt on your own, but if you have a recent backup saved on your device it should be relatively inconsequential if it doesn’t work. Most Apple technicians will complete a DFU restore when you bring your device in for repairs, so you might just save yourself some cash and a trip to the Apple store by trying this step!

    Be extra careful when undergoing a DFU restore, as if certain hardware is damaged your iPhone 12 might turn completely unusable during the restore process. If you think that what’s causing your iPhone to struggle with accessing Wi-Fi is a serious hardware issue, you may want to avoid completing this step unless your have an Apple Store nearby.

    Also Check: Can You Have Two Wireless Routers In One House

    Third Solution: Disable Wifi And Then Enable Again

    Minor wireless system errors that are interrupting the phones WiFi functions must also be eliminated. And the easiest way to do this is by restarting the phones WiFi feature. Heres how its done:

  • Go to Settings from the Home screen.
  • Then select WiFi menu.
  • Tap the WiFi switch to turn the feature off.
  • While the feature is off, restart your iPhone XS.
  • Then head back to Settings-> WiFimenu and toggle the switch to turn the WiFi feature again.
  • Another way to restart and refresh your iPhones wireless features including WiFi is by performing the Airplane Mode trick. Doing so will clear out minor software glitches and corrupted network data that trigger occurrence of random WiFi errors. To try this trick, simply follow these steps:

  • From the Home screen, go to Settings.
  • Select Airplane Mode.
  • Tap the Airplane Mode switch to turn it ON. Doing so will disable all the wireless connections on your iPhone.
  • While the Airplane Mode is ON, restart your iPhone XS.
  • Then head back to Settings-> Airplane Mode menu and toggle the Airplane Mode switch to turn the feature off again, restoring the wireless features on your phone including WiFi.
  • Then try to connect your iPhone XS again to your wireless network. If you are able to connect successfully, open your browser and navigate through different websites to see if all pages are loading. If so, then the WiFi issue on your iPhone XS has been resolved. Otherwise, youve got to move on and try other options.

    How To Upgrade Your Wi

    iPhone Internet Tethering

    To make the change, youll need to log in to your router and modify your Wi-Fi security level. For example, on a Synology router, log in and click Wi-Fi Connect, then choose Wireless in the sidebar. Under Security Level, click the drop-down menu and select WPA2-Personal,WPA2/WP3-Personal, or one of the other WPA3 options.

    Note: If you dont have the ability to configure a Wi-Fi network at the router levelfor example, if youre connecting to a public Wi-Fi network you dont controltheres no way to fix the Weak Security warning. The administrator of the Wi-Fi network has to change its settings. If you dont have this access, all you can do is connect to another Wi-Fi network.

    Remember, the goal is to completely avoid WEP, WPA , and WPA2 . If your router configuration list doesnt mention TKIP, the WPA2-Personal listed likely uses the AES encryption standard, which is still considered moderately secure.

    After that click Apply or Save in your routers configuration interface, then reconnect to the access point with your iPhone. The Weak Security message will be gone.

    In fact, if your router is older, it might be time for an upgrade anyway. Weve picked out some great router options you can consider in our guide to the best Wi-FI routers. Good luck!

    Don’t Miss: Wifi Extender That Works With Spectrum

    Fifth Solution: Reset Network Settings On Your Iphone Xs

    Try to reset the network settings on your iPhone XS, if deleting the WiFi network from your phones directory doesnt solve the problem. Doing so will potentially solve the problem especially if invalid network configurations are at fault. Performing this reset will delete the current network configurations on your iPhone and then restores them to the default values. If you wish to give it a try, then heres how to reset network settings on an iPhone XS:

  • Go to Settings from the Home screen.
  • Select General.
  • Scroll down to and tap on Reset.
  • Then select Reset network settings from the options.
  • When prompted, enter your device passcode to continue.
  • Then select the option to confirm network settings reset.
  • Your phone should reboot itself after the reset. When it has already finished booting up, set up your WiFi network again and then reattempt to connect.

    ALSO READ: How to fix Apple iPhone XS that has no WiFi Internet

    Reset The Network Settings

    If the solutions outlined above are yet to help you get rid of the iPhone wont connect to WIFI issue, you can try resetting the network settings on your device. It is worth noting that when you reset the network settings, you will lose your Wi-Fi and cellular settings, including saved networks and passwords. Follow the steps below to implement this solution:

    Step 1: Open Settings > General > Reset.

    Step 2: Click Reset Network Settings.

    Step 3: If prompted for a passcode, enter it and then confirm your actionby tapping Reset Network Settings on the popup.

    Don’t Miss: Can I Have 2 Routers On My Home Network

    Reconnect To Wi Fi Networks

    Lets start with simple troubleshooting methods and then proceed further. You can most of the time fix Wi fi connectivity issues by simply switching off Wi fi and then turning it back on after a minute or so.

    You can turn off the Wi fi by going to the settings and then toggle the OFF positions Wi-fi button. After 30 seconds or one minute, turn on the Wi fi by toggling the switch towards the ON position.

    Moreover, you can opt for an alternative method to turn off the Wi fi from the control center. Just swipe up the screens bottom edge and go to the control center. You can tap on the Wi fi icon to switch it OFF. After 30 to 60 seconds, tap again to turn the Wi fi ON.

    Why Is My Iphone The Only One Not Connecting To Wi

    My iPhone Won’t Connect To Wi-Fi! Here’s The Real Fix.

    You may not be able to connect your iPhone to the wireless network because of the following reasons. All other WIFI routers connect with your modem, causing problems in the router. If the antenna in your phone is damaged, you may need to replace it. The iPhone keeps connected to the WiFi, even when not connected.

    Also Check: Change Wifi On Blink

    Contact Your Router Manufacturer

    If you cant connect to Wi-Fi on any device, contact your routers manufacturer. There could be an issue with the router itself. Check out our other article for more advanced router troubleshooting tips, or Google the name of your router manufacturer and customer support to find the appropriate phone number.

    Popular Articles

    Related Stories

    Stay on op - Ge the daily news in your inbox