Is It An Always Problem Or A Sometimes Problem
If your wireless just randomly cuts out and comes back, it probably means your router or your device have some bad software thats causing the problem. If it happens across all your devices, giving your router a firmware update might help , and if it only happens with one device, consider updating its wireless drivers. But well talk more about that in the next paragraph.
My Smart Device Isnt Connecting To Wi
First, make sure that your smart device and your router are both updated. Then try resetting your router and rebooting your smart device. You can either unplug and plug in the smart device, or check its app for a reboot option the Google Home app, for example, has a Reboot tool under each device section that you can use.
If the device still isnt connecting properly, try moving it next to the router and seeing if it connects then distance and interference can make a difference, especially for smaller smart devices. You should also double-check to make sure that your smart device doesnt need a Zigbee hub to operate, which is more common among older smart devices but a problem that still occasionally crops up.
If your smart device keeps dropping a Wi-Fi signal, especially during busy times of the day, check to see if your router supports automatic band switching for devices. If it does, try turning this feature off: Sometimes a router will try to switch a smart device to a different band, but the device isnt ready for that, causing it to lose a connection. There may also be issues with connecting to a mesh router, and you may have to be very specific about your network connection to make smart devices work.
Finally, there are a number of other router settings that may block smart devices. If you cant find whats wrong, call up support for that device and explain that you think your router is having trouble connecting.
Why Wont My Laptop Connect To The Internet But My Phone Will
If the Internet works fine on other devices, the problem lies with your device and its WiFi adapter. On the other hand, if the Internet doesnt work on other devices too, then the problem is most likely with the router or the Internet connection itself. One good way to fix the router is to restart it.
You May Like: Southwest A List Preferred Wifi
How To Troubleshoot Home Wifi And Router Issues
The bottom line: 99% of home WiFi issues can be fixed by unplugging the router, waiting five seconds, then plugging it back in. This resets the device and frequently improves the speed.
- WiFi not working
- WiFi network disappearing
- Devices that wont connect to Wifi
Well cover what to do if your connection is running slower than usual, as well as how to troubleshoot a network that wont connect at all. Well also take a look at several tools you can use to help troubleshoot your connection when problems crop up.
Reboot The Wireless Nic In Bios
Although a complicated method for laymen, yet this method is worth trying to resolve the problem of WiFi not working on the Windows 10 PC. You may take a note that the option to restart the wireless NIC in BIOS may differ from system to system as it depends on the motherboard manufacturer.
You can press either the Del, F8, F10, or F12 keys to enter the BIOS when your system is booting.
After you have entered the BIOS, then search for a menu known as Power Management. There should be an option under this called Wireless, Wireless LAN, or something similar to this.
You can now disable this option and restart your system. Repeat the above steps to enter the BIOS again to re-enable the option. This should sort the WiFi connectivity error.
Read More: How To Fix Discord Mic Not Working Issue?
Recommended Reading: Change Blink Camera Wifi
What To Do If The Wi
Slow connections can be very annoying. None of us enjoy a Wi-Fi connection that makes us wait too long to open the websites or watch a video. Many providers blame it on the peak hours when numerous people connect to Wi-Fi at the same time. It is caused by Wi-Fi channels where most of the users are on the same Wi-Fi channel simultaneously.
An easy way to resolve a problem like this is by using the Wi-Fi Analyzer app. It is available on the Google Play Store, and downloading and installing the app is relatively easy. It will analyze the network and will help you check which channel will be best for you.
- Press and hold the reset button for 10 seconds. For some modems, youll need to use a needle and insert inside a bit of hold.
- Unplug the modem from the outlet and wait for at least 5 mins.
It will not work if you are trying to connect to the modem from a remote location or behind discrete walls. Note that it is all about radio waves that travel in a uniform/ straight path. If two or more walls are blocking you, then that can cause interference with your waves.
Another slow Wi-Fi Workaround
Wifi Connected But No Internet: Start With The Router
To identify router problems, connect other devices like your mobile phone to the WiFi and see if it works. If the Internet works fine on other devices, the problem lies with your device and its WiFi adapter. On the other hand, if the Internet doesnt work on other devices too, then the problem is most likely with the router or the Internet connection itself.
One good way to fix the router is to restart it. Though it may sound silly, the restart flushes the caches and fixes many of the associated network and software problems.
If your router and modem are separate, restart both.
- Turn off both of them
- Wait for 30 seconds
- Turn on the modem and one minute later turn on the router.
- Wait for a few minutes and check.
This simple solution will fix many small issues in your router.
You May Like: How To View Your Wifi Password On Mac
First Check Your Router Itself
If youre lucky, your router will have a stricker with an IP address and a password that will make it easy to access its inner workings. If you find that sticker, just put the IP address in the address bar of your preferred browser, and put in the username or password on the sticker. Its not impossible, if this is the first time youve done this, that itll ask you to update your username and password as well. Make sure you dont forget them: theyre very important.
But if you do forget them…
How To Fix Different Device Problems
1. As your typical IT guy will tell you, your first step is to restart your device. This is a standard troubleshooting solution and could be the fix you need to get connected to Wi-Fi again.
2. Your next step is to check your network adapter. Sometimes connection issues arise because your computers network adapter might not be enabled.
On a Windows computer, check your network adapter by selecting it on the Network Connections Control Panel. Make sure the Wireless connection option is enabled.
On a Mac, look for the Wi-Fi card in the top right corner of your screen . Click on the option to Turn Wi-Fi On. If your menu icon doesnt show anything in the menu bar, Apple recommends selecting System Preferences from the main Apple menu, selecting the Network icon and then clicking on Wi-Fi. From there, check the box to Show Wi-Fi status in menu bar.
To check if your wireless adapter is enabled on other Apple devices, check your settings to make sure the device isnt in airplane mode and that Wi-Fi connectivity is on. On Android devices, check your settings to make sure the devices airplane mode is off and that Wi-Fi is on.
Software issues might come up if you have a computer virus, which could disable or block your ability to connect to Wi-Fi. Youll want to scan your computer or device for viruses and remove any if found. Then restart your computer and try connecting again.
Don’t Miss: How To Reset Blink Camera System
Enable Wifi Service To Fix Wifi Not Working
This problem occurs most likely because your Windows disables the WiFi service. So you can check the WiFi settings on your Windows.
Note: Please make sure you are within the WiFi network range while you are following these steps.
Tips: If your Windows laptop has a switch or a key on your keyboard to turn on/off WiFi , please make sure you dont disable the WiFi service by pressing the switch or key. If you accidentally turn off WiFi, please turn it on first.
1) Right click the Internet icon, and click Open Network and Sharing Center.
2) Click Change adapter settings.
3) Right click WiFi , and click Enable.
Note: If it has enabled, you will see Disable when right click WiFi .
4) Restart your Windows and reconnect to your WiFi again.
Virgin Media Hub 3 Or Hub 4 Settings
Just follow these simple steps:
- For more details about the Hub, select Advanced Settings, and then in the Device Management section select Device Status. Here you can see hardware and software versions, how long the Hub has been turned on and connected to the Virgin Media network, as well as the LAN and WAN IP details
- To see more details about the Super Hubs connection to the Virgin Media network, select on Advanced Settings, in the Device Management section, select Device Status, and then select Network Status
If you want the Hub to change back to factory settings, ) by pressing the Hubs pinhole button for 10 seconds with the tip of a pen and leaving it for 510 minutes to start up. When its finished youll see the solidly lit white power light.
Read Also: Mac How To See Wifi Password
Why My Android Phone/tablet Wont Connect To The Internet
While there isnt a single reason you encounter Wi-Fi issues with your android phone, it can be categorized into four circumstances.
4 Possible reasons :
- Network configurations such as IP address and DHCP
- Software and firmware glitch
- Passwords and misinformation
- Radio wave distribution Wi-Fi are radio waves that travel in a straight line. It can be interpreted if you are at a remote location from the modem or behind discrete walls)
Reposition Wireless Router Or Computer
If your computer has difficulties maintaining a strong signal with your wireless router, it can cause connectivity issues. Make sure this is not a problem by trying to reposition the router and its antennas.
If you are having signal strength issues, consider getting a range extender for your home or office to make sure all areas get a strong signal. Alternatively, you can try changing the router’s frequency to reduce signal interference from wireless devices.
You May Like: Pokemon Go Not Working On Wifi
Disable Your Antivirus Or Firewall
Very rarely, obtrusive firewall settings or a bug in your antivirus could get in the way of your internet connection. Obviously you shouldnt go without either of these essential security tools but if you temporarily disable them and find your internet works again, then youve at least figured out the problem.
In that case, your best bet is to either completely uninstall and reinstall your antivirus, which should reset any settings and fix the problem. That said: if the problem firewall and antivirus is Windows Defender, you cant exactly uninstall and reinstall it, since it comes built-in on just about every Windows device. In that case, youll have to temporarily disable it long enough to download another antivirus , which Windows Defender will defer to by default, which should fix the problem.
Open up the Windows Defender app. Youll probably find it as an icon in the lower-right hand corner, or you can search for it in the start menu.
Click the gear in the upper-right corner of the app to go to the Settings.
Find an option called Real-time protection. Toggle it off.
Now, go to the start menu again and search for settings. Click Settings.
Click Update & Security.
Solution : Smart Network Switch
Certain Samsung Galaxy phones come with the Smart Network Switch feature. If the Wi-Fi connection is unstable, your phone will automatically switch to mobile data and use the mobile data connection. While it makes it easy for us to forget problems related to the Wi-Fi, if you do not want to use your mobile data connection, switch it Off. Many users who complained about the Samsung Galaxy S5 keeps dropping Wi-Fi signal found this a helpful solution.
- Pull down the Notifications shade.
- Tap on the Wi-Fi icon to pull up the Wi-Fi Settings menu
- Now Tap on More on the top right of the phone
- A new box will come up on the screen with details about Smart Network Switch.
- Tap on Off to stop using the Smart Network Switch.
You May Like: How To Use Southwest Wifi
Force Open The Networks Login Page
Hotels, airports, and cafes often provide free internetusually all you have to do is open your browser and sign onto the public Wi-Fi network through a login screen. But what if that login page refuses to load?
You can force open the login page by typing one of these codes into your browsers address bar:
Your Internet Plan And Usage On Your Devices
The maximum speed on your internet plan will be shared by all the devices connected to your home WiFi network. It is normal to experience slower speeds if you have many devices connected at once, or one device consistently uploading/downloading substantial amounts of data. This is more noticeable on slower speed packages. Check to see:
- how many devices are connected to your home WiFi network?
- if your devices are running bandwidth-heavy programs
Try closing apps and reducing the number of connected devices, to see if performance improves for the devices still connected.
Also Check: Can You Have Two Wifi Routers In The Same House
Check Ssid And Ip Address
Verify your Android client is connected SSID and IP address. Return to your Android device’s Settings > Wireless & Networks > Wi-Fi panel and tap Wi-Fi Settings. Find your network’s name on the list of nearby Wi-Fi networks.
- If your network’s name is not on the list, the AP or router may be hiding its SSID. Click Add Network to configure your network name manually.
- If your network is on the list but Connected does not appear beneath its name, tap your network to try to connect. If prompted for a password or key , enter it and tap Connect. If you repeatedly try but fail, go to step 7.
- If Connected already appears beneath your network’s name, continue.
Note that whenever you’re trying to connect an Android Wi-Fi client to any network name, status is displayed on the Wi-Fi Settings panel, in the row labeled Wi-Fi. When status is Connected, tap Advanced to view the client’s assigned IP address.
- If a connected client’s IP address is Static but not in the correct subnet , forget the network and connect again, using the “Advanced” settings to choose DHCP.
- If a connected client’s status reads Obtaining address for a long time, or your client repeatedly connects but then quickly disconnects, go to step 7.
- If a connected client’s IP address is in the correct subnet, continue.